Quenching Machine Dealers

• Country of Origin: India
• Type: Quenching Machine
• Condition: New
• Automation Grade: Automatic
• Country of Origin: Made in India
• Frequency: 50 Hz
• Phase: Three Face
• Output Current: 300 Kva

Anti Roller Bars Heating with 3 phase Dc upto 300 Kva upto 1000̊C and lifting and dropping on conveyor chain for quenching in oil tank for heat treatment. Can also be used for heating & bending.

• Automatic Grade: Automatic
• Capacity: 500 Ltr/Hour
• Brand Name: Jettherm
• Phase: 3 Phase
• Frequency: 50 Hz
• Usage: Industrial

• Warranty: 2 Years
• Material: Metal
• Use: Industrial
• Feature: Durable
• Finishing: Polished
• Quality: Good

SIMPLETEC hydraulically operated 3-Ram 40T Quench Press, designed for gears, bearing races, etc., is a single station hydraulic quench press. The outer ring pressing force is 15T, the inner ring pressing force is also 15T and the pressing (or expansion) force of the plug is 10T. All the pressing forces can be independently set. Quench pressure, time and oil flow can be set precisely as required and measured. Pressing forces of the inner ring, outer ring and the plug can be seen on the HMI provided in the electric panel of the machine. Except loading of components, all other operations are automatic. Pick & Place Manipulators for automatic loading and un-loading of components, Secondary Quench System and quench oil Chilling Unit can also be provided. (Photograph shown is without the quench oil guards).

• Voltage: 220/440
• Weight: 100 kg
• Automation Grade: Semi-Automatic
• Brand: OMINI
• Model Name/Number: OMINI-40002
• Material: MS

• Models: QOCP-010-G QOCP-020-G QOCP-010-P

High performance quench oil must have oxidation resistance or low sludge formation, be non-staining, an elevated flash point and have acceptable heat transfer characteristics. Contamination of quench oils is a very serious problem in most cases. etter quality surface finish of the part (no blackening effect or cracking) Reduced post quenching treatment of parts. No loss of productiondue to manual cleaning of quench oil tanks.

• Power: 22 kW
• Automation Grade: Automatic
• Capacity: 5 to 50 Ton
• Model Number: QP-50T
• Brand Name: Simpletec
• Phase: 3 Phase
• Power: 4 kW
• Voltage: 380V

Quenching presses are special purpose presses meant for delicate quench hardening components. Facilities like forced splashing of quenching oil on the components, exhaust of fumes, front guard for enclosing quenching chamber, metering of quenching oil flow etc are the main features of these presses .  BEMCO builds variety of quenching presses to suit different components and their procedures of quenching.          Features 0–100 Hz cycling frequency Hydraulic lifts and clamps 50/100/250/500 kN force rating actuators +/-100 mm stroke actuators Adaptable to wide range of fixtures & grips Actuator on fixed bottom crosshead Electronically servo-controlled variable flow, variable pressure, low noise, energy efficient pump 5+ kHz 32-bit digital closed loop control 24-bit data acquisition               Applications Fatigue crack propagation Fracture mechanics Room temperature tests High temperature tests Testing in corrosive environment Tension/compression Low/High cycle fatigue (LCF/HCF)    

    Indomen sealed quench furnace is a highly productive and efficient integral-quench furnace available in either gas-fired or electric models. It is the centerpiece of a complete heattreating system. The furnaces feature obstruction-free work chambers, large capacity re-circulation fans, and strategically located heated sources to ensure rapid heat transfer, low energy use, and excellent temperature and carbon uniformity. A size and in-out configuration is available to fit your needs.Indomen(sealed) integral quench furnaceModels:sqf-80,120,320,600,800,1000Bringing you over 14 years of innovative furnace designFeatures/benefits Fully automatic movement of the load within the furnace,including quench. Programmable logic controller eliminates sequencing circuit relay maintenance. Temperature and atmosphere carbon potential are bothautomatically controlled. A two-pen strip chart records both furnace temperature and percent carbon. Preheat oil quench with immersion heaters, temperature and excess temperature controllers  Oil level sight gauge and level alarm. Air-to-oil quench cooling heat exchanger. Flowmeters for endothermic gas, natural gas additions,ammonia gas additions, and air for carbon burnout.Emergency nitrogen gas purge circuit activates on power failure or loss of atmosphere. Scr power control for electrically heated models.Recuperative vertical radiant tubes for gas-fired models.Applications Annealing Carbonitriding Carburizing Tool steel hardening up to 1850°f Normalizing Temperature range:1850°f (980°c)Options Upper atmosphere cooling: oil-cooled double walled chamber above the quench, cools the workload under protective atmosphere.Atmosphere cool/oil quench selector switch. Upper cooling is available with or without a recirculating fan to accelerate load cool down. Hot oil quench with additional immersion heaters and insulation lagged to the quench tank shell. Variable speed quench agitation. Enhanced furnace control components. Complete system automation to suit your unique requirements.

quenching oil filtration machine, lubricating oil filtration machine

quenching machine, Hydraulic Machine, Greases, Industrial Oil

Auto Shaft Induction Quenching Machine

Induction Gear Quenching Machine, induction heating cable

quenching machine, Forged Wheel, Forging Wheel, Castings For Cooling Plates

quenching machine, Hardening, Annealing