Ratchet Wheel Dealers

We Offer Crank Shaft Grinding Wheels. crank Shaft Grinding is the Cylindrical Grinding of the Crank Pin or Bearing By Plunge Form Method. normal Speed of Operation: 33 to 45 Mps. sterling's Crank Shaft Wheels Grind Freely, Generate Minimum Heat and At the Same Time Maintain Its Form and Size for a Sufficient Length of Time. It is Used By all Types of Crank Shaft Manufacturers and Regrinding Industry. used On Following Machines: landis, Riat, Norton, Naxos Union, Newall, Churchill, Parishudh.

• Features: Highly durable, Perfect strength, Rust resistance

• Features: Dimensional accuracy, Applications specific design, High strength

Manufactured in full resin bonded abrasive cloth, aluminium oxide and silicon carbide. Special type for stainless steel.

• Brand Name: Schneider Electric
• Packaging Type: Box
• Weight: 200 gm
• Appearance: Modern
• Material: Mild Steel
• Finish: Polished

Used as idler wheel mount in a track belt layout. Use e type circlip for holding the wheel. 6mm Shaft Dummy Motor Dead axel wheels

  Shaft-mounted flap wheels are coupled to the electrical or pneumatic tool spindle by means of a cylindrical or threaded shaft inserted through the central hub. It comes with 3 to 6-mm diameter cylindrical shaft.

• Features: Robustness, Accurate dimensions, Corrosion resistance

• Brand Name: Anand
• Color: Silver
• Material: SS, MS
• Finish: Polished
• Packaging Type: Box
• Usage/Application: Industrial

  A worm drive is a gear arrangement in which a worm (which is a gear in the form of a screw) meshes with a worm gear (which is similar in appearance to a spur gear, and is also called a worm wheel). The terminology is often confused by imprecise use of the term worm gear to refer to the worm, the worm gear, or the worm drive as a unit. Like other gear arrangements, a worm drive can reduce rotational speed or allow higher torque to be transmitted. Material: Phosphor Bronze (PB), Cast Iron, Stainless Steel, Aluminum & Alloy Steel in both soft and Hardened & Ground condition. Shaft Size :From Ø20mm to Ø250mm, Length 50mm – 800mmPitch Size : 1mm – 50mmWheel Size : Ø20mm – Ø800mmModule : 0.5 to 10.00 Applications : Worm Reduction Gear Boxes, Printing Machinery, Textile Machinery, Steering Gear Box, General Industrial Machinery Applications.

worm gears are very useful gear for different industries. worm gears are used when large gear reductions are required. the worm gear that we offer has a unique property of easily turning the gear. the gear cannot turn the worm because the angle on the worm is shallow and when the gears try to spin the worm, the friction between the two holds the worm in place. worm gears work under difficult conditions, presenting unique lubrication demands. the types of oils most commonly used to lubricate worm gears are compounded mineral oils, ep mineral gear oils and synthetics. worm gears are highly useful gears, which is more particularly used in the mining industry. these types of gears are normally placed in motors where large gear reductions are necessary. there are two components in this type of a gear, the worm or the screw and the worm gear or the worm wheel. paragon engineers is one of the finest worm & worm gears manufacturer. for all your gear needs, we are most willing to help. worm gear can reduce the rotational speed of the motor to achieve a higher torque. however, it is not a reversible type of a gear. the motion flows through one direction alone. reducing the speed is possible, but increasing the drive isnã¢ï¿½ï¿½t. however, power to the drive will be increased as the speed is reduced. worm gears contain teeth that correspond to the shafts on the wheel. as the gear revolves, the shaft advances one tooth of the gear. the speed is reduced by the factor corresponding to the number of teeth the gear has. for a 20- tooth gear, the speed will be reduced by the factor of 20. the fewer teeth the worm gear has, the faster the movement of the motor will be. the rotation axis follows a 90- degree angle. raw material used m.s., c.i., ph. bronze, gun metal sizes available od up to 36ã¢ï¿½ï¿½, module up to 20 special features harden & ground used for power transmission speed reduction.

• Shaft Size :: From Ø20mm to Ø250mm, Length 50mm – 800mm
• Pitch Size :: 1mm – 50mm
• Wheel Size :: Ø20mm – Ø800mm
• Module :: 0.5 to 10.00

  A worm drive is a gear arrangement in which a worm (which is a gear in the form of a screw) meshes with a worm gear (which is similar in appearance to a spur gear, and is also called a worm wheel). The terminology is often confused by imprecise use of the term worm gear to refer to the worm, the worm gear, or the worm drive as a unit. Like other gear arrangements, a worm drive can reduce rotational speed or allow higher torque to be transmitted. Material: Phosphor Bronze (PB), Cast Iron, Stainless Steel, Aluminum & Alloy Steel in both soft and Hardened & Ground condition.     Applications : Worm Reduction Gear Boxes, Printing Machinery, Textile Machinery, Steering Gear Box, General Industrial Machinery Applications.  

• Features: Rust proof, Quality tested, Easy to install

• mop wheel: shaft

We Offer mop wheels for metal pipe plishing and grinding size: 25x25x6mm 30x25x6mm 40x25x6mm 40x40x6mm 50x25x6mm 50x50x6mm 60x40x6mm 80x25x6mm

Fixed position hob for generating teeth on ratchet wheel. This hob unlike a conventional hob can cut without forming a fillet.

Worm Wheel and Worm Shaft, Crane Wheels, oil heat exchanger

ratchet wheel, Worm Wheel, Gear

ratchet wheel, Gearbox, Helical Geared Motor, loose gears

These wheels are made up of specially processed resins and squamastyle abrasive cloth hanged on a steel soft core.