Rate Indicator Dealers

Ajinkya Electronic Systems is manufacturer, exporter, supplier of Flow Indicators with various input sensors. This indicators are used to measure liquidflow as well as gasflow. This unit is of 6 digit display with multiplying constant which provides totalized output throughout the process. Logging facility to the PC through Optional RS232 RS485 Ethernet Modbus for the Entire flow process can be provided as per requirements. Relay operation can be provided to control to flow by controlling the pumpmotor

These units are manufactured in a wide range of sizes and specification options but all have the same basic function.A dial and mechanical indicator continuously monitor the flow rate at any given time whilst electrical switches can be specified to signal when a particular level has been reached during increasing or decreasing flow rates. Switches are field adjustable over the full range. Where batching, trending, totalising or recording is required, all Flow-Mon units can be supplied with a 0-10V or4-20mA output. All sizes are manufactured to the same simple design concept, the main characteristic of which ensures that the pressure drops are confined to an absolute minimum (see ‘pressure drop’ charts) across the vane orifice at full flow, with viscosities as high as 600cS. Sizes are defined by pipe size and or maximum flow capacity, and every flow switch is individually calibrated so that full scale deflection is used in each application i.e. the maximum scale reading coincides with the maximum requirement of system as specified by the customer. Calibration may be in any units with single or duel scale to specification.

AJ 110 electronic flow monitor are high speed micro- controller based units with a high resolution back-lit display. By using front panel tactile keys, one can view program different parameters A-110 J-110 is a Digital Rate Indicator suitable for VATS sensors or others giving pulse output of 200 Hz max.A J-110 one can read the flow rate in LPH, M3 Hr only and corresponding. Our IP 65 grade enclosures make our flow meter versatile on both Panel & Field uses.

• Display Type: Digital
• Automation Grade: Automatic
• Backlight.: LED
• Ambient temperature: -40°C to +80°C (-40°F to 176°F).
• Indication: LED Display
• Function: Rate Indication Only

FEATURES Analog and Pulse outputs Pulse type inputs: Reed-switch, open collector, NAMUR, NPN/PNP pulse, Sine wave (coil), active pulse signal. (0)4 – 20mA. Displays total and flow rate simultaneously. Large digit selection for flow rate or total Various accessories are available for this product.   Applications The F-Series is your first and best choice for field mount indicators in safe and hazardous area applications. Especially in harsh weather conditions like rain, snow, salty atmospheres and temperatures between -40°C and +80°C (-40°F up to 176°F). Liquid flow measurement where re-transmission of the flow rate and/or totalizer functions or serial communication is required.

• Material: Die-cast Powder-coated Aluminum; Faceplate #HP92W Lexan
• Type: Rate And Total Indicator
• product applications: water treatment water utilities industrial chemical handling
• input: 5 v pulse or contact closure; 1 to 15 pulses/s.
• temperature limits: process: -32 to 131°f (0 to 55°c); storage: -40 to 158°f (-40 to 75°c)
• output: current sinking square wave pulse: scaled pulse output (0.1 s duration 6.1 hz max. Or high alarm output or low alarm output), sensor pass-through pulse output (un-scaled); pulse output range: 0.1 to 9
• power requirements: 7 to 30 vdc @ 4 ma (4 to 20 ma when loop-powered)
• display: rate: 8 digits, 1/2
• k-factor range: 0.001 to 999999.999
• flow alarm output range: 0.1 to 99999.99.
• enclosure material housing: die-cast powder-coated aluminum; faceplate #hp92w lexan
• enclosure rating: nema 4x (ip67)
• electrical connection: terminal blocks, #22 awg, 3 conductor 18' (5.5 m) cable (2000' max)
• mounting: see model chart on catalog page
• weight: 3 lb (1361 g)
• Input Power: 5 V pulse or contact closure; 1 to 15 pulses/s. : Enclosure Rating:NEMA 4X (IP67)

• Features: Scalable input , High and low alarm , Programmable alarm delay
• Model Name/Number: RC 2108
• Typr: Electronic
• Accuracy: 100%
• Dimensions: 72 x 72mm
• Frequency: 3.5kHz
• Mounting: Press Fit
• Panel Cutout: 72 x 72mm

• Type: Rpm Indicators
• Brand Name: SELEC
• MODEL: RC2108

selec rc2108 rpm indicator and controller rc 2108 model: rc2108 type: rpm indicator and controller voltage: 90 - 270 vac/dc condition: used & working qty: 1 pc available  ref: al107  .

• Application Media: Industrial
• Application: Automotive
• Material: Mild Steel
• Model Name/Number: 54
• Brand: Multispan
• Power Supply: 240V
• Temperature Range: 150 Degree Celsius
•  :  

• Enclosure: S.S-304/S.S-316
• Shaft: Hard Stainless Steel-316 with carbon bush
• Accuracy (standard installation position): +/- 0.5 or 1% FSD
• Repeatability: 0.1%
• Maximum working pressure: 6 MPa
• Fluid &Ambient temperature: -20 to 120 Deg. C
• Connection: Thread (M/F) or flange

ATN Instruments developed and design turbine flow meter available with varient of output : RS 484/ hart/ pulse/ current 4 -20 ma and voltage linear 0-10 vdc, conventional turbine flow sensor and meter for low viscous liquid and gas application, turbine flow sensor model number defined in two category, 1) Heavy duty turbine flow sensor and meter: it’s a fully stainless steel meter with carbide bearing and available from 4mm to 400 mm line size

Our reliable rate-indicators are ideally suited for applications involving the measurement of motor speeds, shaft speeds and the like. Receiving input from a wide range of sources such as proximity switches, photoelectric switches, voltage pulses, limit switches and electromagnetic pickups amongst others, these rate-indicators are also easy to program on the shop floor, highly accurate and retransmit isolated outputs.  

• Accepts Universal inputs – 4-20 mA or 0-10 V or pulse (3 & 2 wire) input type.: Non-volatile memory to retain totaliser flow, no need to battery change.

Flow Indicator Totaliser UT-1201 is compact and easy to use, designed for monitoring the continuous flow rate and total flow. The flow rate along with engineering units is displayed on the upper line of LCDLED display and the totalised flow is displayed on 810 digits on the second line. The microcontroller based design makes it more flexible and powerful compared to conventional flow totaliser. The unit is suitable for use with any flow transmitter giving pulse or analog current output. The display has floating decimal point position, which is programmable from the front panel. The unit has inbuilt relay outputs for Flow rate and Totaliser of alarm or control application. Unitech flow totaliser are available for liquid and gas duties and are available as field wall mounting or alternatively in an explosion proof housing to the latest international standards and will work with orifice any type of flowmeter. Options include pulse andor 4-20mA retransmission or communications outputs to printers or SCADA control systems.

• Size: 96 x 96 x 100 / 150 mm
• Display: 0.5 inch 4 digit / 6 digit or -4 + 6 digit
• Inputs: 5-12 V / Potential free pulse -4-20 mA / 0-10 mA / 0-100 mV factory set -Unbalanced bridge
• Relay output: 230 V / 5A (resi)
• Supply : 230 V / 110 V AC or 24 V DC

• Totalised Reset: By Front panel touch switch
• Sensor Supply: +10V DC provided by instrument

4 digit display for Flow Rate with resolution from 0.001 to 1 6 digit totaliser for integrated flow values with resolution setting from 1 to 0.001 Multiplier programmable with resolution ranging from 0.001 to 0.00001 Input frequency range from 10 pulsesmin to 50,000 pulsesmin Totalized flow saved in memory on power failure Rear panel configuration lock Aesthetically designed front panel with membrane switches Attractive ABS cabinet

Toshniwal offers a very wide range of flow rate indicators / totalizers, complete with pulse and analog output signals. Even demanding applications are catered for with our base unit configuration. The Robust IP66, IP67 (NEMA Type4X) field enclosure is extremely rugged. The indicators are available with intrinsically Safe ATEX and IECEx approvals for gas and dust applications. The sensible menu driven structure ensures that programming can be done by your own crew saving cost and irritation. Very diverse mounting possibilities: walls, pipes, panels or directly onto outdoor sensors. FEATURES Analog and Pulse outputs Pulse type inputs: Reed-switch, open collector, NAMUR, NPN/PNP pulse, Sine wave (coil), active pulse signal. (0)4 – 20mA. Displays total and flow rate simultaneously. Large digit selection for flow rate or total LED backlight. Ambient temperature: -40°C to +80°C (-40°F to 176°F). Various accessories are available for this product. Applications The F-Series is your first and best choice for field mount indicators in safe and hazardous area applications. Especially in harsh weather conditions like rain, snow, salty atmospheres and temperatures between -40°C and +80°C (-40°F up to 176°F). Liquid flow measurement where re-transmission of the flow rate and/or totalizer functions or serial communication is required.

• Model No: RCT206 ,RCT202, RCT203
• Size: 48 x 96 x 100,48 x 96 x 100,48 x 96 x 100
• Display digits: 6+6,4,6

Our reliable rate-indicators are ideally suited for applications involving the measurement of motor speeds, shaft speeds and the like. Receiving input from a wide range of sources such as proximity switches, photoelectric switches, voltage pulses, limit switches and electromagnetic pickups amongst others, these rate-indicators are also easy to program on the shop floor, highly accurate and retransmit isolated outputs.

• Type: Automatic
• Brand: Anamec
• Model Name/Number: FLT-23-A1
• Display Type: Digital
• Frequency: 50 Hz
• Voltage: 230 V
• Humidity: 10% RH
• Current: 20 A
• Body Material: MS