Rectangular Sterilizer Dealers

Introduction The sterilizer is based on the principle that microbiological action of saturated steam at elevated temp is rapid and thorough. All models work on downward displacement of air principle which is most economical method of obtaining for all types of bulk sterilization which are commonly needed in Medical, Agricultural and Pharmaceutical institutes.It is suitable for sterilizing hospital dressings, linen, rubber plastic goods, surgical instruments, glassware and utensils etc. Construction The sterilizer has a robust and rugged all weld construction which is leak proof. The inner chamber is made of thick plate of stainless steel of high quality and jacket is made out of rolled stainless steel sheet. Sterilizers will have single door made out of thick stainless steel plate. All the sterilizers are hydraulically tested to withstand 2.5 times the working pressure.The steam jacket is lined on the outer side with glass wool which prevent heat losses due to radiation and is covered by strong rolled steel sheet duly powder coated.    Boiler Made of thick stainless steel plate suitably located under the sterilizer. High grade flanged type heating elements are fitted from front side for easy replacement/repair. Fitted with water gauge glass for water level, safety valve, water inlet and drain valves. It is also provided with Low Water Level cut off device. This device protects the heater in the generator from burning out dry. The steam pressure in the boiler is indicated on an individual pressure gauge.    Safety Lock for Door Every horizontal rectangular sterilizer is fitted with SELF LOCKING SAFETY DOOR which cannot be opened when the chamber is under pressure. The clutch mechanism automatically disengages the threads of the radial locking system for precluding any eventuality of accident when the chamber is under pressure. A heat resistant Neoprene Rubber gasket ensure steam tight fitting.    Pressure Control Electrically operated "PIEZOSTAT" (Pressure Control Device) is incorporated in all sterilizers. It acts as a safety device, economises power consumption and limits the use of release valve which would frequently blow steam into the room.It cuts off the power supply to heaters when the set pressure is achieved and re-energises heaters when pressure falls down.  

• Shape: Rectangular
• Capacity: Up to 3000 Liters
• Material: Stainless Steel
• Insulation Wall: Triple wall
• Model No.: GTA-004
• Brand: Genist Technocracy
• Temperature: 121 to 134 – Deg
• Available Sizes: 600 X 600 MM to 1200 MM (Customized Sizes are available)

Construction Robust and rugged all weld construction which is leakproof, unlike riveted construction. tde inner chamber is made of a tdick plate of Mild Steel of non-magnetic stainless-steel of 304/316 quality, and tde jacket is made from rolled steel. Sterilizers will have a single door made from rolled steel lined witd STAINLESS STEEL sheet on botd sides. All tde sterilizers are hydraulically tested to witdstand 2.5 times tde working pressure. tde steam jacket is lined on tde outer side witd an asbestos sheet or glass wool which prevents heat losses due to radiation and is covered by strong rolled steel sheet duly painted. Boiler Made of tdick stainless-steel plate suitably located under tde sterilizer. High-grade flanged type heating elements are fitted from tde front side for easy replacement/repair. Fitted witd water gauge glass for water level, safety valve, water inlet, and tde drain valves. It is also provided witd a Low Water Level cut-off device. tdis device protects tde heater in tde generator from burning out dry. All units are hydraulically tested up to 40psi. Triple walled witd Steam Jacket and Separate Boiler. tde sterilization cycle is controlled by Multi port Valve. tde unit is fitted witd all standard accessories. To work on 440volts 3 Phase A.C. Supply. The steam pressure in tde boiler is indicated on an individual pressure gauge. Safety Lock for Door Every horizontal rectangular sterilizer is fitted witd a SELF-LOCKING SAFETY DOOR, which cannot be opened when tde chamber is under pressure. tde sterilizer is provided witd triple safety. Unit is also fitted witd Low-Water Level Cut-Off device and automatic pressure control device. Fitted witd a vacuum breaker to break vacuum in case of formation of vacuum due to steam condensation.   Options PLC controller instead of tde digital controller. 20% extra charges for a double door.

We are offering high pressure rectangular steam sterilizer. material construction: inner chamber : fabricated thick 304 grade or 316 grade stainless steel. middle chamber : fabricated thick plate 304 grade or 316 grade stainless steel or rolled steel. outer cover : fabricated thick sheet 304 grade stainless steel or rolled steel. door construction : fabricated thick plate 304 grade or 316 grade stainless steel or rolled steel. welding process : tig (argon – arc welding) insulation: super good quality glass wool filled with between outer and middle wall. all steam line piping of stainless steel: entire cycle of sterilization controlled from single point operation. safety device self locking of door when chamber is under pressure, pressure switch, safety valve, vacuum braker for jacket. main unit fitted with pressure and vaccum gauge, compound gauge, multiport valve, safety pressure release valve. technical data: working pressure : 1.2 kg/cm2 or 2 kg/cm2 temperature : 121’c 134’c working chamber size height width depth rating (kw) 600 600 1200mm 18.00 900 600 1500mm 36.00 900 900 1200mm 36.00 power supply the autoclave supplied suitable of main cable 2 meter length wire for operation 400/440 volt three phase 50 cycle ac main 4 wire system.

• Material: SS
• Shape: Rectangular
• Capacity: 450 Ltr
• Country of Origin: India
• Usage: Lab & Pharma
• Brand Name: Hospharma
• Type Of Sterilizer: Steam Sterilizer
• Chamber Dimension: As per Requirement
• Pressure Range: 15 PSI
• Temperature Range: 121 Deg Cel
• Automation Grade: Fully Automatic

• Brand Name: Genist
• Application: Laboratory
• Capacity: up to 3000 Liters
• Feature: Semi-Automatic
• Material: Stainless Steel
• Approval Certificate: GMP, CE, ISO, IEC Certificate
• Model No.: GTA-004
• Shape: Rectangular
• Temperature: 121 to 134 – Deg
• Insulation Wall: Triple wall
• Available Sizes: 600 X 600 MM to 1200 MM (Customized Sizes are available)

• Voltage: 220V
• Capacity: 0-100ltr
• Frequency: 50Hz
• Power: 2kw
• Warranty: 1yrs
• Shape: Rectangular
• Application: Laboratory Use
• Feature: High Performance, Good Finishing

Free standing bulk model   Suitable for large Hospitals & for small manufacturing units. Suitable for 10/90 EO/CO2 mixture or 90/10 EO/CO2.    Rectangular Model  600 (H) x 600 (W) x 1200 (D) mm.  900 (H) x 600 (W) x 1500 (D) mm.   Other sizes on request.

• Jacket: Mild Steel / SS 304 / SS 316
• Chamber: Mild Steel / SS 304 / SS 316
• Door: Mild Steel / SS 304 / SS 316 Zinc Metalized or Epoxy Painted
• Loading Carriage: Mild Steel / SS 304 / SS 316
• Transfer Trolley: Mild Steel
• Pipe Fittings: SS 304
• Gasket on Door: Neoprene / Sillicon

Salient Features : Best suited for parenteral solutions, injectables, mattresses And hospital dressings. Unipoint control station for all phases of the sterilizing cycle In smaller size. Operating Temerature 121°C or higher 134°C. All necessary safety precautions namely Pressure locking Door, Spring loaded Safety valve, dead weight Safety valve, Etc.. Incorporated. Loading carriage and trolley as standard accessories for easy transfer of load. Choice of Single Door, Double Door, Recessed or Panel Models. Various material combination like Mild Steel, Stainless Steel 304/316 is available. Steam Trap is incorporated in discharge line for fast and perfect elimination of air. Optional Features : Single Door / Double Door. Flush Mounted. Digital Temperature Recorder. Rapid Heating Rapid Cooling (Air & Water). High Vacuum Pump. High Vacuum Pump PC(Computer)/ PLC based Auto Control Panel. Air Oven Steam Pulsing Pressure System

• Brand Name: STERIMAC INDIA
• Shape: Rectangular
• Application: Hospital
• Model: RS-1
• Size: As per Customer Requirement
• Feature: Good Finishing ,Easy to Use ,Quality Assured

• OPERATING TEMP: 121 º C
• STERILIZING TEMP: 1.2 TO 1.5 KG./ CMÁ(15 PSI TO 22 PSI)

Robust and rigid construction designed for all type of bulk sterilization which are commonly required in medical agricultural and pharmaceuticals.  Suitable for sterilizing hospital dressing linen, Rubber, plastic goods, surgical instrument’s, glassware etc. This autoclave work on down word displacement of air principle, which is most suitable and economic method of obtaining sterilization. Inner Chamber shall be made of stainless steel 304 qlty & Jacket will alsobe made of stainless steel and boiler made of thick stainless steel located under the sterilizer. In this sterilizer also flanged type heating elements are fitted form front for easy replacement.  This Sterilizer has a water level indicator.  It is also provided with low water level cut-off  device which save the life of heater from buring out.  The steam pressure on the boiler is indicated on a individual pressure gauge. The Steriliser is fitted with self locking safety door which can not be opened when the chamber is under pressure. A synthetic neoprene rubber gasket ensure steam tight fitting.  Presurre  control switch (Piezostat) is fitted in the sterilizer to control the Pressure which saves your electricity bill. Pressure control switch (piezostat) is fitted in the sterilizer to control the pressure  between 15PSI to 22 PSI. Sterilizing cycle is controlled from one point with the help of Multipart valve fitted at fron top two separate speed exhaust are available for evaculating. A plug screen prevents the discharge line from chocking. The Plug is easily removable for routine cleaning. A dial thermometer is provided to show the chamber temperature and an automatic vacuum breaker is provided to break vacuum in case of vacuum formation. Two separate valves provided for evacuating air and steam from inner chamber and jacket as and when desired.  A steam trap is fitted in the  discharge line to eliminate the condensate automatically. The sterilizer consists pressure control, Main switch, Pilot Lamps, Relays etc. and mounted on the stand for easy operation.  This Autoclave will have one number door.  to work on 400-440  Volts A. C. 3 phase 4 wire system. Fully micro processed PID Controller which will have following features: Can be operate on manual mode either  or fully automatic mode. Auto purging:- Set Temp. Purging Stop :- Set Temp. Auto Exhaust : - Cool Elapse Time Set Temperature :- Could be set Facility for temp. control Auto cycle stop Buzzer At cycle over   Option: Stainless Steel Carriage. Stainless Steel Trolley. Thermograph to record sterilizing temperature and time.

• Type: Hospital Sterilizers
• Voltage: 110V, 220V, 240V, 380V
• Application: Medical Use, Steam Generation
• Capacity: 0-100ltr, 100-200ltr, 200-300ltr, 300-400ltr, 400-500ltr, 500-600ltr, 600-700ltr
• Frequency: 50Hz, 60Hz
• Power: 1kw, 2kw, 3kw, 4kw, 5kw
• Feature: Durable, Easy To Operate, High Performance, Kill Bacteria, Rust Resistant, Spores And Germs
• Warranty: 1yrs, 3yrs
• Automation Grade: Fully Automatic, Manual, Semi Automatic

Horizontal Rectangular High Pressure Sterilizer (PLT-103 B) APPLICATIONS of High Pressure Rectangular Horizontal Sterilizer Robust and rigid construction. Rectangular Horizontal High-Pressure Steam Sterilizer is Specially designed for Sterilization of Regulated Bio-Medical Hospital Waste and related spores. It is based on the principle that microbiological action of saturated steam at elevated temperature is rapid and through. Rectangular Horizontal High-Pressure Steam Sterilizer is ideal tool for Hospitals & Nursing Homes. SALIENT FEATURES & CONSTRUCTION of High Pressure Rectangular Horizontal Sterilizer These Sterilizers work on the principle of downward displacement of air which is the most economical method of obtaining sterilization. Triple walled with inner chamber and separate boiler is made up of Heavy gauge non magnetic S.S. Sheet (304/316 grade) argon-arc welded and jacket is made out of rolled steel. Boiler Made of thick stainless steel fitted under the sterilizer. High grade flanged type heating elements are fitted from front side for easy replacement/repair. Fitted with water gauge glass for water level, safety valve, water inlet and drain valves provided with Low Water Level cut off device. Whole unit horizontally mounted on a sturdy, heavy M.S. duly painted or Stainless steel tubular stand. Lid (single piece door) made out of rolled steel lined with S.S. sheet on both sides tightened by Radial Locking System which cannot be opened when under pressure. The self-locking device automatically disengages the thread mechanism when the sterilizer is under pressure to preclude any eventuality of accident. Sealing of Lid by Neoprene Rubber Gasket. Fitted with shelf locking safety device. Sterilization cycle is controlled by single point multi port valve fitted at front top. Pressure gauges are fitted to read jacket & chamber pressure on the top A moisture trap is fitted in the chamber discharge line to absorb the condensate automatically to prevent moistening in the chamber. Chamber Insulated by Mineral/Glass Wool to minimize the heat losses and is covered by polished stainless steel sheet. Fitted with pressure gauge, safety valve and steam release valve. Fitted with plug screen to prevent the discharge line from choking. Drain valve is fitted at the side bottom for easy draining/cleaning. Sterilizing Temperature up to 1340C. Sterilizing pressure : 1.2 to 1.5 kg/cm2 (15 psi to 22psi). Hydraulically Tested up to 40 psi. Fitted with Digital Temperature Indicator. Fitted with Automatic Vacuum Breaker to break the vacuum in case of formation of vacuum due to steam condensation. Fitted with Automatic Low Water Level Cut-off Device for Prevention of Heaters. Supplied with Heavy Duty Vacuum Pump (Optional) for vacuum steam pulsating model. Fitted with Automatic Pressure Control Switch to economizes power consumption by reducing frequent opening of the steam release valve. It cuts off the power supply to heaters when the set pressure is achieved and re-energizes the heating elements when pressure falls below the set point. Control panel fitted with Pressure control switch, Main switch, Pilot lamps, relays etc. and mounted on the stand of the sterilizer for easy operation. Voltage: 440 volts, 3 phase A. C. Supply  

Specifications Carries IS Mark 3829 Part II. End ring hydraulically formed without joints to sustain required pressure. All other joints Argon Arc welded. Unique MULTIPORT VALVE located at the top. Controls all operations manually. Two safety valves (dead wt. & spring loaded) and a pressure switch provided to prevent accidental pressure build up. Works on 134°C at 32 psi (2.1 kgf/cm2). Hydrostatically tested 2 times the working pressure. Best suited for rapid sterilization of instruments for Cardiac, Ortho, Neuro and Urology. Vacuum Pump provided along with the unit. Premium Technologies Instruments come out dry after the cycle. Low water level protection for heaters. Pressure lock device for the door. First Cycle: 35 mins. 20 mins. Preheating time, 15 mins. Actual time. Subsequent – 09 mins. Applications Effective sterilization for general OT Tools

Roc96 STEAM STERLIZER RECTANGULAR HIGH PRESSURE  Same as cylindrical high pressure steam sterilizer but in rectangular shape. Outside made of Heavy duty rolled Steel/stainless steel, inside made of thick Stainless Steel, triple walled. Door made of Thick Stainless Steel. Properly insulated Steam Generator is made of Heavy duty Stainless Steel. Pressure Control device is fitted in all electrically operated steam sterilizer. Provided with “Piezostat”(Pressure Control Device).It cut off the power supply to heaters when the set pressure is achieved & re-energies the heating elements when pressure falls below the set point. Boiler is made from thick stainless sheet suitable located under the sterilizer. High grade flanged type heating elements are placed in the form side for easy replacement etc.Fitted with water gauge made of glass for water level, safety valve, water inlet & drain valves. Provided with self locking safety door which cannot be opened when the chamber is under pressure. The clutch mechanism automatically disengages the threads of the radial locking system for precluding any eventuality of accident when the chamber is under pressure. A heat resistant neoprene rubber gasket is provided for totally safety of the instrument. Provided with electrically operated PIEZOSTAT, which economics the power consumption & limits the use of release valve which would frequently blow steam into the room. It cuts off the power supply to heaters when the set pressure is achieved & re-energies the heater when pressure falls down. Two separate valves are provided for evacuating air & steam from inner chamber & jacket. A steam trap is fitted in the chamber discharge line to eliminate the condensate automatically.Pannel consist of pressure control switch, main on/off switch,Indicators,relays etc. The sterilizer is provided with triple safety. First with pressure control switch, Two nos. spring loaded safety valves, and a dead weight safety valve. A PLUG SCREEN prevents the discharge line from choking. And it can easily be removed for cleaning. A power full ejector circulates the air throughout the chamber. OPERATING TEMPERATURE & PRESSURE: 1210 C., 1.2 to 2kg./sq.cm. 

• Certification: CE Certified
• Voltage: 220V, 240V, 380V, 440V
• Frequency: 50Hz, 60Hz
• Warranty: 1yrs, 3yrs, 5yrs
• Automation Grade: Fully Automatic, Semi Automatic, Automatic
• Shape: Rectangular
• Driven Type: Electric
• Feature: Durable, Easy To Operate, High Performance, Rust Resistant
• Application: Industrial

• Working Pressure: 1.26 kgf/cm.Sq.

Multi operating valve, Quick drying apparatus, Accidental vaccum beaker valve, Plug screen, Ejector system , Chamber condensate line with steam trap & Check valve, Jacket condensateline with steam trap & check valve, Safety valve, Air valve, Vaccum breaker, Pressure guage, Compound guage, Dial thermometer, Baffle, etc.Double door, flush mounting with door interlocking systems.

Multi operating valve, Quick drying apparatus, Accidental vaccum beaker valve, Plug screen, Ejector system , Chamber condensate line with steam trap & Check valve, Jacket condensateline with steam trap & check valve, Safety valve, Air valve, Vaccum breaker, Pressure guage, Compound guage, Dial thermometer, Baffle, etc.

To meet the diversified requirements of our prestigious clients, we are engaged in offering a qualitative array of High Pressure Rectangular Steam Sterilizer. With the international quality standards, this product are using the finest grade raw material and advanced techniques. In addition to this, we inspect this product on certain parameters to ensure its sturdiness and quality. Features: Durability. Accurate dimension Excellent finish

Most crucial and versatile instrument for sterilization needs in Pharmaceutical industries, Medical, Hospitals & Clinical laboratories and in Dental laboratories.