Remote Transmitter Dealers

• Type: Wireless Remote Control Transmitter
• Shape: Rectengular
• Color: Brown
• Condition: New
• Color: Brown

VT is a valid signal high output pin upon receiving a valid signal, the pin output high may also drive the relay.Receiver Operating voltage: DC 5V. No. of the channel: 4 Operating modes: Non-Locking Receiver Operating voltage: DC 5V. Receiver sensitivity is: -98dB. Transmitter Operating voltage: DC 12V Transmitting frequency: 315 MHZ. Transmitter Operating current: 10mA at 12V. TransmitterRadiated power: 10mW at 12V. Transmission distance (m): 3 to 5. Specifications and Features: Transmitter Remote control: Modulation mode: ASK (Amplitude Modulation). Encoder types: fixed code. Decoding receiver board: Receiver Operating voltage: DC 5V. Receiver sensitivity is: -98dB. Leg 7 bits: VT, D3, D2, D1, D0, +5V, and GND. VT is a valid signal high output pin upon receiving a valid signal, the pin output high may also drive the relay. Size: 7 x 22 x 41 mm. Pin Connection and Functions: 1.VT output status indication. 2.D3 data output. 3.D2 data output. 4.D1 data output. 5.D0 data output. 6.5V power supply positive. 7.GND power supply negative. 8.ANT connects the antenna terminal. Total of eight external receiver module interface. “5V” means a positive power supply, “D0, D1, D2, D3” represents the output, “GND” means the power supply is negative, “ANT” means connect the antenna terminal. Far as the pro-distance requirements, then the best quarter-wavelength antenna, generally use a 50-ohm single wire, the length of the antenna is about 17cm. Package Includes 1 x Wireless Four button remote control. 1 x Super Regenerative receiver module.

• Model Number: DX6i DSMX 6-i
• Full range: 2.4GHz DSMX 6-channel radio
• Charger: 4-cell 150mAh wall charger

• Weight: 37g

RF Remote with four channel output. Directly gives TTL on for a corresponding switch press.RF Remote with four channel output. Directly gives TTL on for a corresponding switch press.

• Condition: New
• Brand Name: Nikon
• Model: WT-6
• Maximum Range: 200 m

• Type: Transmitter Remote Control
• Material: Polycarbonate, PVC
• Power Supply: Rechargeable NiCad battery -1200mAh / 9.6V
• Operating Range: 100m

• Transmitter Power Supply: 42-60 V AC,85-240 V AC,100-240 V AC,42-115 V AC,10-30 V DC (depending on the housing type)
• Brand Name: HBC-radiomatic
• Adaptive Frequency: 2.4 GHz
• Housing Material: Plastic or aluminum housing

We are offering remote controls. on/off buttonhelps to keep control transmitter from the within 10 mt distance on/off switch facilitatepause and restart the without disturbing setting transmitter.helps easy grade setting either of the axis.easy calibration setting the remote control specifications range33 ft. (10m)battery9vsize (mm)110 x 70 x 25mmkit weight (kg)0.1kgoperating temperature-20 to 55oc

•  : Model
• Range: : 0 to 100%RH / -40 to 100ºC
• Display: : NIL
• Versions: : Remote Mount

H2, 3 and 4 humidity and temperature transmitters are designed for environment monitoring and controlling in industrial and commercial buildings. These transmitters can be used for:   Humidity and temperature monitoring of supply, exhaust and return air (H2, duct mount) Humidity and temperature monitoring in critical environment such as outside air (H3, outside mount) Other applications of immersion humidity and temperature monitoring (H4, separate probe)   Features : High performance digital sensors and circuits, ensure accurate measurement and temperature compensation Good long term stability and reliability 100% field changeable sensors, no re-calibration needed Fast response Digital technology applied, multiple output optional, over voltage and reverse polarity protection, high reliability and \interference capability Industrial design, SS probe and selectable filter High protection rate up to IP65  

• Features: FS-CT6B Transmitter, FS-R6B Receiver,Programming Cable,Bind Plug.

Features Channels: 6 Channels Model Type: Heli, Airplane, Glid RF Power: Less than 20db Code Type: 2.4Ghz No Interference Sensitivity: 1024 Low Voltage Warning: LED DSC Port: Yes Charger Port: Yes Modulation: GFSK

• Color: silver
• Antenna Length: 26 x 2mm (LxD)
• Certificate: CE0678, FCC
• Charging Port: No
• Code Type: Digital
• Dimensions (mm) LxWxH: 179 x 161 x 81
• DSC Port: Yes
• Low Voltage Warning: On <4.2V
• Model Type: Digital Radio Trans receiver
• Modulation Type: GFSK
• No. of Channels: 10
• Operating Voltage: 4.2V
• RF Power: Less Than 20 dbm
• Sensitivity: 4096
• Weight (gm): 410
• Default Operating Mode: Mode 2 (Left-Hand Throttle)
• Band-Range: 2.4055
• Bandwidth: 500 KHz
• Shipment Dimensions: 28 × 22 × 12 cm

• Material: SS, Hastelloy Diaphragm
• Frequency Range: Digital
• Suitable Pressure Ranges: As Per Client Requirements
• Power: 24 VDC
• Size: 1/2"
• Temperature: 80 Deg C
• Model No.: Diaphragm Seal DP Transmitter
• Connection: Flanged
• Minimum Order Quantity: 2 Number

External input keys, short to ground 4 start transmitting data, the equivalent of the remote control D keys. ANT: transmitting antenna, External input keys, short to ground start transmitting data 3, the equivalent of the C key on the remote control.

MASS 6000 is based on the latest developments within digital signal processing technology engineered for high performance, fast flow step response, fast batching applications, high immunity against process noise, easy to install, commission and maintain. The MASS 6000 transmitter delivers true multiparameter measurements i.e. mass flow, volume flow, density, temperature and fraction. The MASS 6000 IP67 transmitter can be compact mounted on all sensors of type MASS 2100 DI 3 to DI 40, and can be used in remote version for all types of MASS 2100MC2 and FC300 sensors.

The measuring possibilities of the SITRANS P line are extended by a wide range of remote seals. These seals are used when measuring hot, corrosive, highly viscous, or crystallizing material . The following types of remote seals are available : Flanges according to EN, ASME, and other connections , either rigid connection to the transmitter or via flexible capillary. Various filling liquids for temperatures of material up to 400 °C (750 °F). Various diaphragm material options. Special versions specific to each industry.

Remote Air Velocity Transmitter, Flow Measuring Transmitter

remote transmitter, Temperature Controller Box

Remote seal transmitters are most often used when it is necessary to isolate the transmitter from the process for any reason. The process fluid may be at an elevated temperature. The process material may be a slurry that would clog standard instrument lines.

ABB Remote Seal Transmitter, Fluke 50 Series II Thermometer

Wireless Remote Control Transmitter, Gearboxes, Load Cell, Electrical Motors