Resistance Furnaces Dealers

• Voltage: 220/230 V
• Brand Name: Shivang
• Country of Origin: Made in India
• Power Source: Electric
• Power Consumption: 3.2 kw , 5.0 kw , 8.0 kw, 6.5 kw, 10.0 kw , 7.0 kw , 11.5 kw
• Width: 550 mm to 1000 mm
• Height: 450 mm to 520 mm
• Depth: 395 mm to 465 mm

• Certification: ISO9001 2008
• Brand Name: Indotherm
• Weight: 1300-5000 kg
• Voltage: As Per Model
• Type: Bogie Hearth Furnace
• Application: Heat Treatment Furnace
• Model Number: Bogie Hearth Furnace
• Port: Nhava Sheva Mumbai
• Dimension(L*W*H): As Per Below Specification
• Place of Origin: Haryana, India
• Packaging Details: Wooden Crate Packing Fumigatoin will be done if required by Country Customs

• Country of Origin: Made in India
• Voltage: 230V
• Durability: Long Life
• Surface Finishing: Polished
• Melting Material: Iron
• Power Source: Electric
• Input Voltage (V): 440V
• Furnace Voltage (V): 230v
• Rated Power (KW): 18KW

• Melting Material: HEAT TREATMENT FURNACE
• Type Of Furnace: Fix
• Power Source: Electric
• Rated Power (KW): 72kw
• Material Loading Capacity (T): 2000 kg
• Input Voltage (V): 440V
• Furnace Voltage (V): 240V

A highly efficient crucible bale out furnace for melting and holding with the following advantages: Freely radiating elements for imporved performance Very low heat loss Fast element change Low power requirement Long element life Continuous element monitoring and display for rapid diagnostics Aluminium capacities up to 1135 kg. Separate element temperature protection Half power switching Accurate metal temperatures through automatic, proportional, integral and derivative control Conforms to the relevant Indian Standards on safety. FURNACE DESCRIPTION The type HE Furnace is constructed using the most efficient low thermal mass materials for the lining and provides the maximum economy in energy cost.The superb insulation allows for excellent melting performance at high power efficiencies, consistent with long element panel life.Radiation losses are minimised by use of a well insulated swing aside cover that can be sealed when no baling out is needed. Heater AssembliesTwelve refractory heater panels are arranged around the crucible and extend to the full depth of the furnace chamber. Typical power loadings of only 3-4 watts/sq.cm ensure long life. whilst the self-supporting design facilitates ease of removal. multistrand element tails and cool stud terminals enable element changes to be made in less than 10 minutes without removing the crucible. Control PanelThe control panel provides: Circuit breaker for isolation and protection Earth leakage detection for operational safety Crucible and heater hour meters Time clock swithching. The furnace elements are depicted on a mimic diagram and ultra bright LEDs. are lit when any panel is drawing the required current Metal temperature control may be eighter from floating or fixed pyrometers or one housed within the crucible.The programmable Controller will maintain the metal temperature within very close limits by automatic adjustment to heat input, whether melting or holding.The digital display shows both the required temperature and current metal temperature.Options Details of optional extras available and furnace variants, ie: Larger capacity, low height furnaces for holding applications Electronic kilowatt hour meters for kWh totalising or with energy management output and direct kW reading. Thyristor control for contactless switching and potential use of energy management systems for multiple furnace installations conforms to the latest compatibility standards Key FeaturesImproved Temperature ControlTemperature scheduling of control terms provides maximum accuracy of metal temperature whether melting from cold or maintaining.Temperature DepressionThis energy conservation feature enables a lower holding temperature to be automatically selected during periods of ‘ non use’. The controller contains a real-time/date clock, which can be programmed to select reduced temperature and to return to operation temperature when required. Similarly, the real-time clock can be programmed to start up and shut down the furnace at preset times and dates. Enhanced Power ManagementThis feature, when selected by the panel mounted switch, reduces output power by 50% at a preset temperature below the normal operating value. output power is therefore limited to half power during holding should the temperature fall outside an acceptable limited due, for instance, to cold metal addition full power is re-established to provide rapid recovery. Half and full power switch positions are also provided.Output Limited Thermocouple Failure Protectionif the thermocouple sensor fails, this feature provides a programmed level of output power control. Typically set to 10% the time proportioning power control provides sufficient output power to maintain an aluminium charge within an acceptable temperature range.Improved Top Cover Insulation The addition of insulation with exceptional insulation properties to the furnace reduces surface temperature, thereby improving working conditions, heat loss safety.StandardsThe Morgan Electric Resistance Bale Out Furnace Type He MkIV has been designed and manufactured in accordance with the relevant national & international Standard.RangeThe Morgan Electric Resistance Bale Out Furnace Type HE MkIV is available in the size range 85 kg-1135kg aluminium. high temperature versions available up to 1050 c capacities 260 Kg.-1400 Kg brass. other crucible patterns than those shown in the performance table are available to provide the capacity spanIndicated for each size reference. 

1. Cold rolling steel spraying exterior; open-side door enables easy onoff. 2. Medium temperature furnace adopts enclosed fire pot. The spiral electric alloy wire coil as heating component coiled on the furnace walls. It is efficient and durable. 3. High temperature tubular resistance furnace adopts heat resistant combustion tube and takes elema as heating component to fix on the fireport exterior. 4. High-temperature box resistance furnace takes elema as heating component to fix inside the firepot.

The furnace is Thyrister controlled for energy efficient operation. Our humble effort to reduce our carbon footprints and preserving a better earth for tomorrow! Ceramic fiber lining enables precise control on metal temperature within + / - 5 degrees Celsius. Continuous dip type thermocouple to control "Liquid metal temperature". PLC control panel for auto limit control, programmable for each alloy series. Silicon carbide crucible for "Contamination free melting". Low hydrogen pickup due to electric melting.

• Furnace Type: Electric Resistance
• Approx. Hold Capacity (kg): Aluminium – 300 / 500
• During Melting unit per kg: 0.5 – 0.55
• During melting unit per hour: 13 -15
• Maximum Coil Capacity: 50kw – 78 kw

Box Type Resistance Furnace, Humidity Temperature Controller, Altimeter

heat resistance furnace, heat treatment plant furnaces

electric resistance furnaces

resistance furnaces, Pusher Furnace, Salt Bath Furnace, Hot Air Generator

resistance furnaces, Carbell Kiln, Holding Furnace, Ladle Preheater

Resistance Furnace

Resistance Gold Melting Furnace

Electrical Resistance Furnace, Pot Furnace, Gas Carburizing Services

Heat Resistant Trays Normalizing Furnace, Base Trays for Furnace