RF Transmitters Dealers

• Certification: CE Certified
• Weight: 400-800 Gm
• Driven Type: Electric
• Temperature: 0-40 Deg C

We also deals in equipments of Military and Aerospace like RF modules for communication and data Transmission, GaN HEMT’s, GaN-SiC pallet amplifiers & Modules, MMIC/LNA, Couplers/Combiners/Dividers, etc RF modules for communication and data Transmission GaN HEMT’s GaN-SiC pallet amplifiers & Modules MMIC/LNA Couplers/Combiners/Dividers

• Type: Wireless Remote Control Transmitter
• Shape: Rectengular
• Color: Brown
• Condition: New
• Color: Brown

VT is a valid signal high output pin upon receiving a valid signal, the pin output high may also drive the relay.Receiver Operating voltage: DC 5V. No. of the channel: 4 Operating modes: Non-Locking Receiver Operating voltage: DC 5V. Receiver sensitivity is: -98dB. Transmitter Operating voltage: DC 12V Transmitting frequency: 315 MHZ. Transmitter Operating current: 10mA at 12V. TransmitterRadiated power: 10mW at 12V. Transmission distance (m): 3 to 5. Specifications and Features: Transmitter Remote control: Modulation mode: ASK (Amplitude Modulation). Encoder types: fixed code. Decoding receiver board: Receiver Operating voltage: DC 5V. Receiver sensitivity is: -98dB. Leg 7 bits: VT, D3, D2, D1, D0, +5V, and GND. VT is a valid signal high output pin upon receiving a valid signal, the pin output high may also drive the relay. Size: 7 x 22 x 41 mm. Pin Connection and Functions: 1.VT output status indication. 2.D3 data output. 3.D2 data output. 4.D1 data output. 5.D0 data output. 6.5V power supply positive. 7.GND power supply negative. 8.ANT connects the antenna terminal. Total of eight external receiver module interface. “5V” means a positive power supply, “D0, D1, D2, D3” represents the output, “GND” means the power supply is negative, “ANT” means connect the antenna terminal. Far as the pro-distance requirements, then the best quarter-wavelength antenna, generally use a 50-ohm single wire, the length of the antenna is about 17cm. Package Includes 1 x Wireless Four button remote control. 1 x Super Regenerative receiver module.

We are offering Rf Transmitter etc.features: frequency: 433mhz modulation: ask transmitter input voltage: 3-12v includes transmitter and receiver this is the 315mhz rf low cost transmitter/receiver pair.

• Brand Name: Nivo control

We are offering rf capacitance level transmitter. The rf capacitance level transmitter is ideally suited for level measurement of liquids and some slurries of homogeneous composition having a stable dielectric constant. The performance of rf capacitance level transmitter is not affected by the properties of the material such as conductivity, corrosiveness and viscosity. rf capacitance level transmitter - application examples raw water potassium hydroxide heavy water chemical solutions chilled water acetic acid effluent phosphoric acid sewage edible oil oleic acid diesel methanol beverages juices rf capacitance level transmitter - features optically isolated 4-20 ma output universal power supply micro-controller based instrument with built-in diagnostics remote monitoring display in user selectable units offered with a wide range of probes to suit the needs of various application

• Weight: 0.1Kg(s)

• Power: 4.5 to 7V
• Quiescent Current: 4.5 mA
• Transmitting range: upto 100 Meters
• Transmitting Frequency: 315MHz
• Operating Mode: Non Locking
• Channels: 4
• Dimensions: 4.5 x 2cm
• Weight: 37g

• Frequency Range: 433.92 MHZ.
• Supply Voltage: 3
• Output Power: 4
• Circuit Shape: Saw

This 433 MHz ASK Wireless transmitter can be used in remote control applications, wireless data transfer applications, mobile robots and burglar alarms. This is an ASK Hybrid transmitter module at 433 Mhz. The transmitter Module employs a SAW-stabilized oscillator, ensuring accurate frequency control for best range performance. There is no requirement of external RF components except Antenna.

• Type: Rf Transmitter
• Certification: ISO 9001:2008 Certified
• Voltage: 12-24 VDC, 6-12 VDC
• Driven Type: Electric
• Automation Grade: Automatic, Semi-automatic
• Condition: New

• Type: Rf Transmitter
• Certification: ISO 9001:2008 Certified
• Voltage: 12-24 VDC, 6-12 VDC
• Driven Type: Electric
• Automation Grade: Automatic, Semi-automatic
• Condition: New

• Voltage: 5 V
• Transmitting Range: 20
• Transmitting speed: 4KB/s
• Transmitting Power: 10mW
• Transmitting frequency: 433MHz

e.g. a Central control panel can communicate with a remote alarm in the same premises through RF transceivers to give alarm signal. This ensure that wiring related problems do not exist in case of emergency. Note: We are not working in RF transmitters and RF receivers as separate products. We are working only in RF Transceivers which are used in specialized applications only. Hence if you are exploring RFID or RF tagsreaders you should look elsewhere.

• Power Supply: 230 V AC /110 V AC +/-15%
• Size: 22x74x100 mm, 72x110x80 mm
• Accuracy: -1%, Pt-100-0.2% +/-1LC
• Input Volts: 4-20 mA, 0-1 V

The RF Capacitance Level Transmitter is ideally suited for level measurement of liquids and some slurries of homogeneous composition having a stable dielectric constant. The performance of RF Capacitance Level Transmitter is not affected by the properties of the material such as conductivity, corrosiveness and viscosity.

This RF transmitter with 4 switches and RF receiver contains connector to connect any of the devices which can be controlled wirelessly. Features Transmitter operating range up to 50 meters with LED indication On Board 5V Operated Transmitter Receiver Indicates output status by LED Receiver operates from 12V AC or DC power supply Transmitter This is RF transmitter operating at 433 MHz frequency. It contains four switches. When a switch is pressed, it transmits encoded signal to remote control receiver which decodes the signal and controls any device. Features 433 MHz operation Frequency Onboard Antenna Active Data Transmission Indication LED Range 100 Meters

rf transmitter BECIL has been requested by number of Community Radio Stations which are not operating with prescribed performance for the technical quality. This degradation in technical performance has resulted in adverse impact on the coverage area. The community radio operators also have been found to be in need of professional technical assistance for day to day technical operations and maintenance of the facility. Broadcast Engineering Consultants India Limited a Public Sector Enterprise under Ministry of Information & Broadcasting has carried out pioneering work in setting up of community radio centres across the country. BECIL also has in-house transmitter and antenna system customized for community radio operators.

rf transmitters, JPEG Color Camera, Ultrasonic Distance Sensor

radio frequency transmitter, generator slipring, terminal bar

Ready to use with 8 bit Microcontrollers • Input power supply- 5v • 4 data lines connected to Burg stick • Test switch on each Data bit • Output LED's on each Data bit • Frequency 433MHz.

RF Transmitter 433MHz, Laser Transmitter Diode 5V

rf transmitters, Electrical Switches, Control Valve

rf transmitters, Analytical Instruments, Phase Converter, Ultrasonic Sensors

rf transmitters, GPs Clock, high speed rf modules, Rf Receivers

Rf Transmitter, PIC 16f877A Development Board, rf receiver

rf level transmitter, rf level switch, emission sensor, dust monitor

Rf Transmitter, industrial wireless radio, Wireless Transmitter

A well recognized RF TRANSMITTERS supplying company.

radio frequency transmitters, rf transmitters, Satellite Receiver

• Country of Origin: India
• Type: Rf Transmitter
• Certification: CE Certified

Non-Ex Transmitters Our Non-Ex transmitters are suitable for use in non-hazardous environment. The Transmitters are built using stainless steel for durability and reliability. Some of the features include, • High efficiency, long life. • Patented construction (batteries inside transmitter coil). • Available in coded models for multiple pig designation. • O-ring sealed for harsh pipeline environments. • Rugged, industrial, stainless steel construction. • Available in standard (pulsing 22 Hz), continuous (22 Hz) and coded models • Non - EX models which are pressure proof to 800 psi (Note: When used inside a Delrin can, it can withstand 2500psi) • Operating temperature: -20 degrees to +50 degrees (Celcius). ATEX Certified Transmitters Our Ex Model Transmitters are more durable and are certified for use in Hazardous environment. Also available are tough Delrin cans which serve as additional sealing and protection for the transmitter and are recommended in most pipeline applications. • ATEX Certified Transmitters • EX models which are pressure proof to 2500 psi! • High efficiency, long life. • Patented construction (batteries inside transmitter coil). • Available in coded models for multiple pig designation. • O-ring sealed for harsh pipeline environments. • Rugged, industrial, stainless steel construction. • Available in standard (pulsing 22 Hz), continuous (22 Hz) and coded models. • Operating temperature: -20 degrees to +50 degrees (Celcius). Custom Transmitters We offer a wide range of custom transmitters based on our client’s requirements either longer run time or higher signal strength. Some of our custom transmitter lines are, Transmitters: Custom made switchable transmitters allows user to switch between 22Hz Pulsing mode and 22 Hz continuous mode. Please contact sales@innovienindustries.com for further enquiry. Programmable Transmitters: As the name suggests, our programmable transmitter helps user to program the transmitter to transmit one of the following frequencies at a time. 1. 22 Hz Pulse 2. 22 Hz Continuous 3. Code A (15 Hz) 4. Code B (19 Hz) 5. Code C (26 Hz) This custom transmitter can be programmed any number of times, which eliminates usage of 5 different transmitters. 

rf transmitters, low noise amplifiers, Electronic Components