Rim Saw Blade Dealers

• Material: Mild Steel
• Color: Silver
• Thickness: 0.20 Mm, 0.25 Mm, 0.30 Mm, 0.35 Mm, 0.5mm
• Diameter: 4
• Arbor hole: 5/8
• Compound: Diamond Abrasive

FEATURES OF DIAMOND SAW BLADE:    Diamond grits are pressed into the periphery of the steel cutting blade such that small notches are formed along the edge of the rim. These diamond particles on the notch rimmed blade work to cut rocks. The diamonds are oriented inside the matrix of the steel diamond saw blade with precision and care so that the blade provides optimum results. It is made with a high-grade steel core that provides toughness to the diamond saw cutting blade. The diamond saw blade can be used to cut or trim rocks that are hard as well as soft such as garnet, emerald, ruby, agate, jade, geode. It works best with water and oil as a lubricant while cutting or grinding gemstones. But if you wish to avoid imparting oiliness or greasiness to the material, it is advised to use water. Nevertheless, both work to prevent overheating of the diamond saw blade while cutting. It is manufactured carefully to ensure that it is mounted perfectly flat and parallel to the surface to avoid wobbling or vibration of the cutting blade.  These notched rim diamond saw blades are available in a range of diameters (4”, 5”, 6”, 8”), thickness (0.20mm, 0.25mm, 0.30mm, 0.35mm, 0.5mm) and arbor sizes(½”, ⅝”, 1”, 20 mm, 30 mm) according to your saw machine and lapidary needs. You also have the added advantage of getting these diamond blades made in desired specific dimensions (mm or inches). Contact us about this.    ADVANTAGES OVER OTHER DIAMOND CUTTING BLADE:   Notch rimmed diamond saw blade is the most economical diamond blade that is ideal for any lapidary artist. The advanced technology of the diamond blade allows every diamond compound to participate fully in cutting. This cutting blade provides an uninterrupted surface for a smooth and effective cutting process. It provides the most efficient results as thin diamond blades cause minimal wastage of rock while cutting. Hence, it is useful for expensive and valuable rocks. Also, check out our super-thin blades for bare minimum wastage. Our diamond saw blades are popularly known for their aggressive and fast cutting and grinding capabilities of any type of rocks. It has a stiff core blade that delivers rigidity to the blade. This ensures that rigidity and roundness of the diamond blade are not compromised for long term usage. It provides consistent results throughout the process of grinding and trimming gemstones and rocks. Its layered quality requires minimal dressing of the cutting blade. As diamonds wear away, it exposes a new layer of diamonds for continuous results. Using this diamond saw blade properly will ensure the least deformation of the material being cut. In order to ensure that the diamond saw blade lasts longer and does not wear away fast, the hardness of the material being cut needs to be chosen accordingly.   SPECIFICATIONS (Standard size):   Diameter: 4", 5”, 6”, 8”  Arbor hole: 5/8", ½”, 1” Thickness: 0.20 mm, 0.25 mm, 0.30 mm, 0.35 mm, 0.5mm Compound: Diamond Abrasive    USER GUIDE FOR DIAMOND BLADE:   Before beginning with the lapidary operation, do keep in mind to ensure that the arrow on the diamond blade points in the same direction as that of shaft rotation. The cutting blade should be run at an adequate speed which would vary according to the type of material being cut, and equipment being used.  We recommend that RPM for soft stones should be ideally more and for hard rocks, it should be at a lesser speed. Thinner diamond saw blades are quintessential for high-value stones so that stock removal of material while cutting is reduced. Water or oil should be used as a coolant on the diamond cutting blade. It reduces overheating of the blade. Moreover, constant flow of lubricator in the right quantity helps improve the efficiency of blade yielding finished surfaces of stones. You must ensure that diamond blades are cleaned after usage, removing water from its surface. If it is exposed to stagnant water for a long time, it may rust the cutting blade. The equipment being used should be in good condition and must be clean, free of dust for perfect results. It should be kept in mind that light to medium pressure must be applied to the diamond saw blade. Increased pressure leads to overloading and overheating of the blade.    SHIPPING INFORMATION:   Time for shipping varies depending on the shipping region but usually, it takes a maximum of 5-7 business days to be delivered anywhere in the world, once it’s dispatched.  The shipping of our notched rim diamond saw blade is insured.  The product is manufactured and shipped from India. For International customers, the fees on import duty or customs charges will not be incurred by us. Every country’s customs policies are different and must be considered by the customers on their own.   SUPPORT: Drop us an email at sales@jewelsntools.com or contact us from the website for any assistance. We’d be quick to respond and glad to help.

• Country of Origin: India
• Type: Metal Saw Blades
• Color: Silver
• Shape: Round
• Specialities: High Perfomance
• Packaging Type: Carton Box
• Finishing: Polished

4 inch Rim diamond saw blade

• Features: Durable nature, Strong build, Rust free

• Features: Optimal performance , Available in various sizes ,Customized design.

• Brand Name: CUMI
• Diameter: 110 mm
• Type: Continues Rim
• Thickness: 2 mm
• Features: Premium semi hot press bond, Super balanced steel body and safe
• Usage/Application: Granite & Marble
• Height: 8 mm
• Bore: 20 mm

• Type: Rim Blade
• Material: Metal
• Shape: Round
• Finishing: Polished
• Color: Silver
• Warranty: 6 Months

We are engaged in offering Continuous Rim Blade to the customers. The Continuous Rim Blade, offered by us, is used to produce chip-free, clean cuts on a variety of hard, ceramic materials. The high quality diamond provide for a faster cut-rate and a longer blade life. The consistent diamond distribution and concentration combined with high-quality steel core reduces distortion at high operating temperatures, reduces the vibration and thus provide high performance.

• Brand Name: G V
• Color: Black
• Usage: Industrial
• Speed: 13800
• Model Number: 4x110
• Size/Dimension: 4 Inches

• sizes: 150mm to 300mm

Continuous Rim Blade, Electroplated Bond Wheels, depressed centre discs

4inch Continuous Rim Diamond Saw Blade, 4inch Cutting Blades

Continuous Rim Blade, depressed centre discs, paper discs, Regulating Wheels

Continuous Rim Blade, cloth discs, Diamond Polishing Pads, Film Backed Discs