Rock Cutting Machine Dealers

Rock cutting machine can be used to cut rock cores. Concrete cores, stones, building materials and metallic specimens. A smooth finish cut can be made with the machine in either wet or dry operation according to the nature of specimen (cutters are at extra cost). The specimen cutting machine is designed to cut up to 200 mm (specify the size of deep cut required in the specimen) deep cut in the concrete, stones, tiles, soft rocks and hard rocks or any other similar material. Specimen cutting machine is supplied complete fitted on a steel table, vice is fitted to hold the specimen. A guard is provided for the diamond cutting wheel. The machine is operated by an enclosed type of fan cooled motor through the geared head drive. The speed of the cutting wheel is approximate 2100 to 2200 r. P. M. Or in accordance with the revolution specified on the particular cutting wheel. The machine is fitted with water supply pump for cooling the specimen and cutting during cutting operation. The machine is suitable for operation on 440 volts a. C. Mains, 3 phase. In the machine arrangement is provided to move the sample, fitted on vice, lengthwise and breadth wise.

Petrography is a branch of petrology that focuses on detailed descriptions of rocks. mineral content and the textural relationships within the rock are described in detail. The classification of rocks is based on the information acquired during the petrographic analysis The detailed analysis of minerals by optical mineralogy in thin section and the micro-texture and structure are critical to understanding the origin of the rock. A slice of rock was affixed to a microscope slide and then ground so thin that light could be transmitted through mineral grains that otherwise appeared opaque. The position of adjoining grains was not disturbed, thus permitting analysis of rock texture. Thin section petrography became the standard method of rock study. Since textural details contribute greatly to knowledge of the sequence of crystallization of the various mineral constituents in a rock,

This machine applies for non-woven materials. It can make many kinds of bags such as vest bags, loop handle bags, flat bags and ribbon-through bags for shoes and purse etc. It is equipped with computer touch screen, step motor to control the length and photo electricity to track, accurately and steadly. These are control devices like auto counting alarming, autocounting alarming, auto-punching etc., which make the finished products well-sealed and nice-cutting with high speed and efficiency. It is and ideal environmental protecting bag making equipment.

• Brand Name: Veekay
• Cutting Blade Size (inch): 10 inch
• Power Consumption (Watt): NA
•  :  
• Warranty: 1 year
• Model: Veekay make
• Item Weight (Kgs): 100-200 Kg
• Voltage: 220 V
• Diameter: 50 - 200 mm
• Power supply: 3 HP, 3/5 Phase

• Voltage: 440 Volts
• Power Source: Electricity
• Phase: 3 Phases
• Diameter: 54 mm - 250 mm
• Thickness: 1 mm
• Speed: 2100 to 2200 r.p.m.

• Automatic Grade: Automatic, Manual
• Type: Rock Cutting Machine
• Certification: ISO 9001:2008
• Color: Black, Blue, Brown, Grey, Yellow
• Voltage: 220V
• Condition: New, Used
• Driven Type: Electric
• Warranty: 1year
• Power supply: 0-5 Hp

• Pair of Jaws: for 60 mm dia samples
• Load Gauge: 0-200 kN x 2 kN

The instrument is designed to test specimens from 50 mm dia to 100 mm dia having thickness equal to half the diameter. A pair of loading jaws, designed so as to contact a disc shaped sample at diametrically opposed surfaces over an arc of contact of about 10 degrees at failure, is supplied. The set of jaws supplied with the equipment is designed for 50 mm dia specimen and therefore it is essential to order jaws for respective sizes,

• Model: HV-EXP1664

Rock Concrete Masonry, saw cutting machine can be used to cut Rock Cores. Concrete Cores, Stones, Building materials and metallic specimens.. Bitumen-Asphalt Testing Lab equipment manufacturers,exporters and Bitumen-Asphalt Testing Lab suppliers A smooth finish cut can be made with the machine in either wet or dry operation according to the nature of specimen (Cutter are at extra cost). The specimen cutting machine is designed to cut up to 200 mm (specify the size of deep cut required in the specimen) deep cut in the Concrete, Stones, Tiles, Soft rocks and Hard rocks or any other similar material. Specimen cutting machine is supplied complete fitted on a steel table, vice is fitted to hold the specimen. A guard is provided for the Diamond cutting wheel. The machine is operated by an enclosed type of fan cooled motor through the geared head drive. The speed of the cutting wheel is approximate 2100 to 2200 r.p.m. or in accordance with the revolution specified on the particular cutting wheel. The machine is fitted with water supply pump for cooling the specimen and cutting during cutting operation. The machine is suitable for operation on 440 Volts A.C. mains, 3 phases. In the machine arrangement is provided to move the sample, fitted on vice, lengthwise and breadth wise. civil lab equipments manufacturers

• Brand Name: SMART
• Model Name/Number: SSRS - 550T
• Warranty: 1 year
• Features: 55 Tons of mobile splitting force * Stone processing size 800 mm with 250 mm

granite rock cutting machine

Rock Cutting Machine, Pipe Cutting Machine, Concrete Cutting Machine

Rock Cutting Machine, Rock Breaker Machine

Rock Cutting Machine, Material Testing Equipments

Rock Cutting Machine, Metacentric Height Apparatus

Rock Cutting Machine