Rod Threading Machine Dealers

One of the foremost Suppliers, we are a known for the exceptional Rod Bar Threading Machine in the market. Our dedicated staff and quality auditors take care of the complete manufacturing of the products, even the raw material sourced at the initial stages are checked on the grounds of quality.

Using only quality raw materials, our entire range of products is manufactured. We make sure that the raw materials we use are thoroughly checked against varied quality parameters. According to your convenience, to pay for an order, our company can settle on a method of payment. We are familiar with online and offline payment methods. We only want to make payment safe and secure for you.   Details : The Rod Threading Machines are designed to give maximum efficiency and reliable performance under the most severe conditions of service with minimum maintenance cost. All the necessary requirements are combined in this model to from the basic fundamentals of correct threading. All the gears are made of case hardened steel with extra large face with and tooth thickness and cut on hobbing machine for noiseless operation even at high speed. Naturally the are built with high standards of workmanship, material and quality so closely associated with Company Tradition. The Rod Threading Machine is used for Cutting External Thread on Rod by Chasing method. HSS Tangential Chasers are used as cutters. Rod remains stationery and Die Head rotates. BSP, MATRIX, BSPT, NPT, UNF,UNC, BSW, Acme Threads can be cut on this machine depending upon the type of Chasers.   The machine mainly consists the following : Base Head Stock Saddle Pillar Type Or Bed Type Clamping Vice Die Head Design & Workmanship : The National Cutting Tools Rod threading machines are designed to produce quality threads within the to lerance for which they were intended. Head Stock : A heavy duty geared Head Box is of best quality casting providing support to the spindle bearings. The box is of gear type, lubricated, fitted with three extra heavy duty bearings. The Bed : The bed is pillar type having two pillars made of best quality steel nicely finished & duly hard chrome plated in the most modern hard chrome plating unit. The Saddle : The Saddle is fitted on two pillars very precisely. It runs on pillars very smoothly and accurately to the Head Stock alignment. The Apron : The apron gives movement to the saddle with head transfer along with pillars through steel rack and pinion arrangements. It's all gears are made of best quality steel. Vice Jaws : The vice jaws made from the best quality alloy steel are fitted on the saddle well aligned with the head stock center fitted in a heavy duty box type vice. The jaws are heat treated. The movements of jaws are controlled by a screw on the saddle. Range of NCT Threading machines and Die Heads. 3/8'' to 1.12'' do/- 1/2'' to 2.1/2" do/-

• Weight: 100-1000kg
• Voltage: 220V
• Automatic Grade: Automatic
• Power: 1-3kw
• Driven Type: Electric
• Warranty: 1year

Rod Threading Machine is used for Cutting External Thread on Rod by Chasing method. HSS Threading Chasers are used as cutters. Rod remains stationery and Die Head rotates. Matric, BSP, BSPT, NPT, UNF,UNC, BSW, Acme Threads B.S.F etc. threads can be cut on this rod threading machine depending upon the type of Chasers. The Rod Threading Machine mainly consists the following : Base Head Stock Saddle Bed or Pillar Type Clamping Vice Die Head. Industrial Machinery Corporation are Threading Machine Manufacturer, Exporters, and supplier. ROD THREADING MACHINE is designed to give maximum efficiency and reliable performance under the most severe conditions of service with minimum maintenance cost. The Industrial Machinery Corporation Threading machines are designed to produce quality threads within the tolerance for which they were intended.We offer a wide range of well designed Threading Machines in India and abroad.These Threading Machines are robust in design, efficient, and durable.our Threading Machine is that we thoroughly check the raw material that we use for its quality and after it has surpassed all the quality checks and assessments, it is permitted to be used in our factory. The Rod Threading Machine of industrial machine corporation has many notable features which empower this machine to give our results in form of highly précised and accurately finished high quality threads despite operating at a very high speed.   The range of IMC Threading Die Heads : 1/4″ to 1″ do/- 3/8″ to 1.1/2″ do/- 1/2″ to 2.1/2″ do/-

We are Manufacturer, Exporter and Supplier of genuine quality Rod Threading Machine, which is highly admired by all our clients in the quality cautious market. These machines are highly preferred by the clients as they are easy to use. We are one of the preeminent threading machine manufacturers in India. These machines encompass advanced features that assist us in producing high quality threads at a fast pace. There is a heavy duty geared head box provided for qualitative support to the spindle bearings. Tie rod threading machine manufactured by us offers high resistance to abrasion and heat. The delivery of these threading machines is made well within the stipulated time period. The Rod Threading Machine is used for Cutting External Thread on Rod by Chasing method. HSS Tangential Chasers are used as cutters. Rod remains stationery and Die Head rotates. BSP, MATRIX, BSPT, NPT, UNF,UNC, BSW, Acme Threads can be cut on this machine depending upon the type of Chasers. The machine mainly consists the following:- Base Head Stock Saddle Pillar Type Or Bed Type Clamping Vice Die Head The Rod Threading Machines are designed to give maximum efficiency and reliable performance under the most severe conditions of service with minimum maintenance cost. All the necessary requirements are combined in this model to from the basic fundamentals of correct threading. All the gears are made of case hardened steel with extra large face with and tooth thickness and cut on hobbing machine for noiseless operation even at high speed. Naturally the are built with high standards of workmanship, material and quality so closely associated with Company Tradition. Design & Workmanship : The National Cutting Tools Rod threading machines are designed to produce quality threads within the to lerance for which they were intended. Head Stock : A heavy duty geared Head Box is of best quality casting providing support to the spindle bearings. The box is of gear type, lubricated, fitted with three extra heavy duty bearings. The Bed : The bed is pillar type having two pillars made of best quality steel nicely finished & duly hard chrome plated in the most modern hard chrome plating unit. The Saddle : The Saddle is fitted on two pillars very precisely. It runs on pillars very smoothly and accurately to the Head Stock alignment. The Apron : The apron gives movement to the saddle with head transfer along with pillars through steel rack and pinion arrangements. It's all gears are made of best quality steel. Vice Jaws : The vice jaws made from the best quality alloy steel are fitted on the saddle well aligned with the head stock center fitted in a heavy duty box type vice. The jaws are heat treated. The movements of jaws are controlled by a screw on the saddle. Range of NCT Threading machines and Die Heads. 3/8'' to 1.12'' do/- 1/2'' to 2.1/2" do/-

Rods Bars Threading Machine is use to cut the external threads with the help of Tangential chaser. Chaser is use as a cutter in machine. Rod Bar Component threading remain still, Die-head rotates.

• Size: 1/4" to 1", 3/8"

The RodBar Threading Machine is use to cut the external threads with the help of Tangential chaser. Chaser is use as a cutter in Machine. The Component remain still, Die-head rotates and different type of threads can be cut such as BSPT, BSW, BSP, NPT, UNF, METRIC, UNC, ACME, BSF Threads.RodBar Threading Machine are designed to give maximum efficiency and reliable performance under the most severe conditions of service with minimum maintenance cost. All the necessary requirements are combined in this model to from the basic fundamentals of correct thread. All the gears are made of case hardened steel with extra large face with and tooth thickness and cut on hobbing machiness for noiseless operation even at high speed. Naturally the are built with high standards of workmanship, material and quality so closely associated with COMPANY TRADITION.

we are manufacturer of pipe machinery used by steel pipe industry. we manufacture different type of pipe processing  machineries, an following is the list of our pipe products: pipe threading machine pipe end facing machine pvc pipe threading machine pipe bevel machine square threading machine scaffolding props jack pipe threading machine rod threading machine conduit pipe threading  

Backed by efficient logistics team, we make deliveries of the goods in the set time span. We are a quality-centralized firm and make use of only high quality material for manufacturing the offered lot. Also, we ensure that the material is sourced from the reliable places.   Details : The Rod Threading Machine is used for Cutting External Thread on Rod by Chasing method. HSS Tangential Chasers are used as cutters. Rod remains stationery and Die Head rotates. BSP, MATRIX, BSPT, NPT, UNF,UNC, BSW, Acme Threads can be cut on this machine depending upon the type of Chasers. The machine mainly consists the following : Base Head Stock Saddle Pillar Type Or Bed Type Clamping Vice Die Head   The Rod Threading Machines are designed to give maximum efficiency and reliable performance under the most severe conditions of service with minimum maintenance cost. All the necessary requirements are combined in this model to from the basic fundamentals of correct threading. All the gears are made of case hardened steel with extra large face with and tooth thickness and cut on hobbing machine for noiseless operation even at high speed. Naturally the are built with high standards of workmanship, material and quality so closely associated with Company Tradition.Design & Workmanship : The National Cutting Tools Rod threading machines are designed to produce quality threads within the to lerance for which they were intended.Head Stock : A heavy duty geared Head Box is of best quality casting providing support to the spindle bearings. The box is of gear type, lubricated, fitted with three extra heavy duty bearings.The Bed : The bed is pillar type having two pillars made of best quality steel nicely finished & duly hard chrome plated in the most modern hard chrome plating unit.The Saddle : The Saddle is fitted on two pillars very precisely. It runs on pillars very smoothly and accurately to the Head Stock alignment.The Apron : The apron gives movement to the saddle with head transfer along with pillars through steel rack and pinion arrangements. It's all gears are made of best quality steel.Vice Jaws : The vice jaws made from the best quality alloy steel are fitted on the saddle well aligned with the head stock center fitted in a heavy duty box type vice. The jaws are heat treated. The movements of jaws are controlled by a screw on the saddle.Range of NCT Threading machines and Die Heads : 3/8'' to 1.12'' do/- 1/2'' to 2.1/2" do/-

• Country of Origin: India
• Type: Rod Threading Machine
• Certification: ISO 9001:2008 Certified
• Color: Blue
• Condition: New
• Automatic Grade: Automatic, Manual, Semi Automatic
• Brand Name: IMC

Rod Threading Machine is used to cut the external threads with the help of a Tangential chaser. Chaser is used as a cutter in Machines. The job remains still, Die-head rotates and different types of threads can be cut such as BSPT, BSW, BSP, NPT, UNF, METRIC, UNC, ACME, and BSF Threads. It mainly consists of the following:- Base Head Stock Saddle Bed Clamping Vice Die Head. ROD THREADING MACHINE is designed to give maximum efficiency and reliable performance under the most severe conditions of service with minimum maintenance cost. All the necessary requirements are combined in this model to from the basic fundamentals of the correct thread. All the gears are made of case hardened steel with an extra large face and tooth thickness and cut on hobbing machine for noiseless operation even at high speed. Naturally, they are built with high standards of workmanship, material, and quality so closely associated with COMPANY TRADITION. Range of IMC Die Heads. 1/4" to 1" do/-3/8" to 1.1/2" do/-1/2" to 2.1/2" do/- Rod Threading Machine   MODEL 1/4" TO 1" (6MM to 25MM) (BED TYPE) 3/8" TO 1.1/2" (10MM to 40MM) (BED TYPE) 1/2" TO 2.1/2" (12MM to 65MM) (BED TYPE) Saddle Movement 10" 13" 22" Spindle Speed Range 75-140 75 -140 45 - 90 Number of Spindle Speed 2 2 2 Threading Capacity 1/4" to 1" 3/8" to 1.1/2" 1/2" to 2.1/2" Production per Hour 60-80 60-80 70-90 H.P. Required 3 H.P. 3 H.P. 7.5 H.P. Lead Screw Optional Optional Optional Weight (KG) Approx. 500 550 990

• Type: Automatic
• Certification: CE Certified
• Weight: 1000-2000kg
• Voltage: 380V
• Power: 3-6kw
• Driven Type: Electric
• Warranty: 1 Year

Rod Threading Machine, GI Pipe Threading Machine, Pipe Threading Machines

We are an eminent and leading trader of Rod Threading Machine

Rod Threading Machine, Pipe Bending Machines, pipe threading machine

Rod Threading Machine

Rod Threading Machines, Threading Machines, Bar Threading Machine

Rod Threading Machine

Rod Threading Machine, pipe threading machine, H.S.S Threading Tap