Rotary Piston Vacuum Pump Dealers

Below are the product details of Rotary Piston Vacuum Pump Models: KT-150C KT-300D KT-500D KT-850D Features: Full pumping speed down to 1 Torr Can operate continuously (at any pressure) up to 100 Torr Ultimate pressure 10 Microns (McLeod Gauge) Adjustable gas ballast permits handling of condensable vapors No metal to metal contact in pumping chamber Unequaled durability, even in dirty applications Compact footprint design Simple installation, no special preparations required Triplex piston design provides quiet, vibration-free operation

• Country of Origin: India
• Type: Rotary
• Brand Name: Sarvovac
• Phase: Single Phase
• Number Of Stages: Single Stage
• Power: 150 Watt
• Motor Speed: 880 RPM
• Voltage: 220 V
• Weight: 20 Kg

• Certification: CE Certified
• Driven Type: Electric
• Material: Metal
• Weight: 20-300kg
• Condition: New
• Automatic Grade: Semi Automatic
• Quality Tested: Yes

FEATURES Pumping Capacity Range: 85m3/hr, 250m3/hr and 500m3/hr Ultimate Pressure: < 1.2 x 10-3 mbar Extremely durable design & construction Minimal maintenance and Process downtime High tolerance to condensable vapor High tolerance to abrasive and corrosive vapors   Applications The TPP series was designed and fabricated with high durability in mind. It can easily handle demanding applications where most other pumps cannot compete. Metallurgical Heat treating Vacuum coating Degassing Transformer drying PET and polymer processing Chemical processing

We are engaged into manufacturing High Vacuum Pumps. These Vacuum Pumps are used for different application and are made from superior quality raw material. Some of the features of our products are:     Capacity : 50 lit/min to 10,000 min/lit   Vacuum : 0.5 mm of HG and higher Vacuum with Booster   Motor HP : 0.5, 1, 2, 3, 5, 7.5, 10, 15, & 20   Type : Single Stage unit   MOC : CI, SS 304 & 316 APPLICATIONS :   RICON Oil Sealed High Vacuum Pump is widely accepted as the standard equipment. Chemical industries, Laboratories, Pharmaceuticals Plants, Research Institutions are using RICON High Vacuum Pump for different application such as:     Evacuation of chambers   Vacuum Coating   Brazing, Degassing   Distillations   Dehydration   De aeration   Purification   Synthesizing Vacuum Evaporation   Drying   Deodering   Filtration   Curing of   Protective coating   Vacuum forming UNIQUE FEATURES In operation condition the piston do not touch the internal surface of the pumping chamber so that the friction losses are less. All clearances being perfectly sealed and lubricated with vacuum oil to achieve higher vacuum. Unique valve design virtually eliminates valve maintenance and noise. Each pump is equipped with controllable Gas Ballast to provide good vapor handling capability. Volumetric efficiency is as 80% los pressure (High Vacuum). Rugged construction is simple design and low maintenance. Air and water cooled construction. Cage slide pin avoids consumable spares commonly required in other types of pumps. A separate oil tank is provided above the pump with inbuilt design, which pours down the oil on the rotor and like other conventional pump the rotor does not remain immersed in the pump at all the time. This is the specialty of this pump which helps the user substantially in cutting down the cost of Vacuum Oil.  

Toshniwal manufactured TPP series Rotary Piston Vacuum pumps are multi-stage, heavy-duty Vacuum pumps. They are designed and fabricated for withstanding harsh and demanding applications where high resistance to abrasion and corrosion is required. These industrial grade pumps are better able to handle solvents, water vapor, corrosive gases and even small particulates than most other alternatives. The TPP series are pumps of choice for those looking for a durable, trouble-free, long lasting vacuum solution. FEATURES Pumping Capacity Range: 85m3/hr, 250m3/hr and 500m3/hr Ultimate Pressure: < 1.2 x 10-3 mbar Extremely durable design & construction Minimal maintenance and Process downtime High tolerance to condensable vapor High tolerance to abrasive and corrosive vapors Applications The TPP series was designed and fabricated with high durability in mind. It can easily handle demanding applications where most other pumps cannot compete. Metallurgical Heat treating Vacuum coating Degassing Transformer drying PET and polymer processing Chemical processing

The rotary piston vacuum pump has become the major workhorse for a number of vacuum applications where relatively large chamber volumes have to be evacuated, where there is a large volume of outgassing from chamber walls or the process product or when the process has a high gas throughput due to gas being fed into the process chamber. They are excellent if the process requires a vacuum range between a few mm Hg (also called torr after Mr. Torricelli) down to about 50 microns. The pumps are generally rated to give an ultimate vacuum of 10 microns. (1 micron = 11000th of 1 mm Hg) Remember that the vacuum level in the process chamber will always be higher than the ultimate or blank-off vacuum at the pump inlet.

  RICON Oil Sealed High Vacuum Pump is widely accepted as the standard equipment. Chemical industries, Laboratories, Pharmaceuticals Plants, Research Institutions are using RICON High Vacuum Pump for different application such as:     Evacuation of chambers   Vacuum Coating   Brazing, Degassing   Distillations   Dehydration   De aeration   Purification   Synthesizing Vacuum Evaporation   Drying   Deodering   Filtration   Curing of   Protective coating   Vacuum forming       UNIQUE FEATURES   In operation condition the piston do not touch the internal surface of the pumping chamber so that the friction losses are less. All clearances being perfectly sealed and lubricated with vacuum oil to achieve higher vacuum. Unique valve design virtually eliminates valve maintenance and noise.   Each pump is equipped with controllable Gas Ballast to provide good vapor handling capability.   Volumetric efficiency is as 80% los pressure (High Vacuum).   Rugged construction is simple design and low maintenance.   Air and water cooled construction.   Cage slide pin avoids consumable spares commonly required in other types of pumps.   A separate oil tank is provided above the pump with inbuilt design, which pours down the oil on the rotor and like other conventional pump the rotor does not remain immersed in the pump at all the time. This is the specialty of this pump which helps the user substantially in cutting down the cost of Vacuum Oil.

• Model: IVP 74
• Oil Capacity: 0.4
• Suction Port: 2/8"

• Type: Single Stage unit
• Capacity: 50 lit/min to 10,000 min/lit
• Vacuum: 0.5 mm of HG and higher Vacuum with Booster
• Motor HP: 0.5, 1, 2, 3, 5, 7.5, 10, 15, & 20
• MOC: CI, SS 304 & 316

We are engaged into manufacturing High Vacuum Pumps. These Vacuum Pumps are used for different application and are made from superior quality raw material. Some of the features of our products are:   APPLICATIONS :   RICON Oil Sealed High Vacuum Pump is widely accepted as the standard equipment. Chemical industries, Laboratories, Pharmaceuticals Plants, Research Institutions are using RICON High Vacuum Pump for different application such as:     Evacuation of chambers   Vacuum Coating   Brazing, Degassing   Distillations   Dehydration   De aeration   Purification   Synthesizing Vacuum Evaporation   Drying   Deodering   Filtration   Curing of Tobacco   Protective coating   Vacuum forming   UNIQUE FEATURES   In operation condition the piston do not touch the internal surface of the pumping chamber so that the friction losses are less. All clearances being perfectly sealed and lubricated with vacuum oil to achieve higher vacuum. Unique valve design virtually eliminates valve maintenance and noise.   Each pump is equipped with controllable Gas Ballast to provide good vapor handling capability.   Volumetric efficiency is as 80% los pressure (High Vacuum).   Rugged construction is simple design and low maintenance.   Air and water cooled construction.   Cage slide pin avoids consumable spares commonly required in other types of pumps.   A separate oil tank is provided above the pump with inbuilt design, which pours down the oil on the rotor and like other conventional pump the rotor does not remain immersed in the pump at all the time. This is the specialty of this pump which helps the user substantially in cutting down the cost of Vacuum Oil.

Industrial Rotary Piston High Vacuum Pump, oil sealed high vacuum pump

Rotary Piston High Vacuum Pump, Rotary Air Lock Valve, rotary air lock feeder

Oil Seal Rotary Piston Vaccum Pump, Liquid Ring Vacuum Pumps

Single Stage Belt driven Rotary Piston Vacuum Pumps are designed and manufactured to address the vacuum needs of various Industrial applications with a pumping capacity of 250 m�/hour or 4166 litre per minute. Pump is designed to deliver superior performance with tailor made Molecular distilled oil. These Filed proven Piston Vacuum Pumps delivers consistent vacuum performance through state of art design. Features: Rugged and conventional design Belt driven suitable for low and medium vacuum vacuum pumping Ultimate Pressure: 5 x 10�� mbar

E / DK - Rotary Piston Vacuum Pumps, DIP - Oil Diffusion Pumps

Oil Sealed Rotary Piston Vacuum Pumps & Systems, Twin Lobe Vacuum Boosters

Industrial Rotary Piston High Vacuum Pump, Liquid Ring Vacuum Pumps

Rotary Piston Vacuum Pump, Feedthroughs, collar flange, centering ring

Oil-sealed Rotary Piston Vacuum Pumps, Articulated Arms, mobile generators