Rotary Sifters Dealers

• ADVANTAGES: Food Dairy Products Animal Feed Resins and Dyes

ROTO SIFTER PRINCIPLE Material is screw fed into the cylindrical sifting chamber by means of a feed screw. The rotating paddles which do not contact the stationary screen propel each particle through the screen by the action of centrifugal force. The oversize material is conveyed axially and thrown at the other end. The machine thus separates the material into two grades.

• Features: Dust free operations, No vibration and noiseless than 80DB, Flexible design to reduce floor space, Easy to clean and maintain, Hygienic & high efficient machine design

• Capacity: 100-500 kg/hr
• Voltage: 440V
• Power: 1-3HP
• Material: SS
• Automation Grade: Automatic
• Phase: Three

  The material to be sifted is fed into the stationary cylindrical screen by means of a screw mounted on the rotating shaft. A series of paddles which rotate inside the screen without contact, centrifugally force the material against the screen breaking up soft agglomerates. Sub-sieve material (fines) that pass through the screen discharge into a collection hopper at the base of the machine. Oversize material and hard lumps (that cannot be broken by hand) traverse down the length of the screen to the overs outlet. An adjustable baffle plate at the end of the screen regulates the flow of overs.   Designed to meet high-capacity scalping and sifting for both large and small process applications, the Ricon Rotary Sifter proves its cost efficiency daily in the handling of a wide variety of powder, granules, agglomerates and other free flowing materials.   FEATURES     Dust-free, hygienic operation   Quiet, vibration-free action   Quick screen change   Easy clean-out   Double sealed outboard bearings with Air Purging   High throughput capacity   Continuous operation   Compact design   Inline application   V-Belt Drive

The equipment has a cutting edge technology in high capacity sifting and delumping technology.   The Principle of Operation The indeed falls into the sifting chamber. Centrifugal acceleration ensures a continuous flow of material. Finished products are discharged 360˚ around the screen. Impurities are collected in the screening chamber which can be easily removed. The sifting chamber rotates along with the drive at rpm ensuring discharge up to 2 tons  per hour.   Salient Features It is extremely gentle on product as there is low heat generation during the entire process. Noise level below 95db is easily achieved due to the advance drive systems. Almost the entire product is sieved and in case there are lumps, the baffle breaks the same and it is finally sieved. The equipment is extremely compact in design. Also the equipment is made customizable i.e. 1) The cantilever length of the arm can be increased or decreased. 2) The discharge height of the sieving chamber can be made adjustable. 3) The admit distance between the support legs can be widened or decreased depending upon the vessel into which the discharge takes place.           Back    

The material to be sifted is fed into the stationary cylindrical screen by means of a screw mounted on the rotating shaft. A series of paddles which rotate inside the screen without contact, centrifugally force the material against the screen breaking up soft agglomerates. Sub-sieve material (fines) that pass through the screen discharge into a collection hopper at the base of the machine. Oversize material and hard lumps (that cannot be broken by hand) traverse down the length of the screen to the overs outlet. An adjustable baffle plate at the end of the screen regulates the flow of overs. Designed to meet high-capacity scalping and sifting for both large and small process applications, the Ricon Rotary Sifter proves its cost efficiency daily in the handling of a wide variety of powder, granules, agglomerates and other free flowing materials.   FEATURES     Dust-free, hygienic operation   Quiet, vibration-free action   Quick screen change   Easy clean-out   Double sealed outboard bearings with Air Purging   High throughput capacity   Continuous operation   Compact design   Inline application   V-Belt Drive

The material to be sifted is fed into the stationary cylindrical screen by means of a screw mounted on the rotating shaft. A series of paddles which rotate inside the screen without contact, centrifugally force the material against the screen breaking up soft agglomerates. Sub-sieve material (fines) that pass through the screen discharge into a collection hopper at the base of the machine. Oversize material and hard lumps (that cannot be broken by hand) traverse down the length of the screen to the overs outlet. An adjustable baffle plate at the end of the screen regulates the flow of overs.   Designed to meet high-capacity scalping and sifting for both large and small process applications, the Ricon Rotary Sifter proves its cost efficiency daily in the handling of a wide variety of powder, granules, agglomerates and other free flowing materials. FEATURES     Dust-free, hygienic operation   Quiet, vibration-free action   Quick screen change   Easy clean-out   Double sealed outboard bearings with Air Purging   High throughput capacity   Continuous operation   Compact design   Inline application   V-Belt Drive   APPLICATION   Starch   Dextrin   Flour   Chemicals   Spices EXECUTION The units are available in MS, SS 304, 316, and in various configurations allow adaption of individual requirements. The sieve meshes can be supplied in SS or nylon, with different aperture sizes, to suit customer needs and product specifications.

Indpro Rotary Sifters are designed to classify, scalp or de-lump dry powders or granules. These are ideal for sizing, sifting, scalping and classifying applications.   PROCESS The material to be sifted is fed into the cylindrical screen by a screw mounted on the rotating shaft The rotating cylindrical screen with rotates at a higher RPM compared to a series of paddles, which rotate inside the screen without contact, centrifugally force the material against the screen to break up any soft agglomerates Sub-sieve material (fines) that pass through the screen discharge into a collection hopper at the base of the machine Oversize material and hard lumps (that cannot be broken) traverse down the length of the screen to the overs outlet An anti – blinding brush continuously clean the cylindrical wire mesh of the sieve, ensuring maximum separation efficiency

This Turbo-Sifter is a high capacity, versatile, compact and economical centrifugal sifter widely used for the continuous separation of dry moist materials, even those that tend to ball or agglomerate. It is the preferred sifter for many chemicals, foods, dairy products, pharmaceuticals, biological, animal feeds, plastics and resins and a wide variety of powders or granular materials. The totally enclosed, sanitary design of the unit keeps products pure, and the large viewing door permits inspection, cleaning and complete screen change in a matter of minutes. The Turbo-Sifter is available in single and twin models with appropriately sized motors. Units may be free standing or adapted for easy mounting on existing equipment. The choice of separating media is almost endless, covering nylon and other monofilament cloth, woven wire in selected metals and profile wire units in which the high strength wire medium also as the basket. The Turbo-Sifter can be used for everything from low cost scalping at capacities to 20 tons per hour to the retention of particles as small as 37 microns. Available in two categories – Direct drive & Belt drive

Machine are designed on the principle of gyratory motion generated by double eccentric weight mounted on two ends of the shaft of vertically mounted specially designed vibro motor. The screening assembly consisting of one or more set of deckscreens is mounted on a set of annularly located springs, effectively isolating the base from vibrating assembly. The double weight moving with the shafts and located at relative angular position produces three dimensional vibrations which in turn cause the material falling on the screen mesh move at a specific speed in straight to spiral direction giving controlled and effective screening. Due to the adjustability of weight and the relative angle between them it is possible to make the material move on the screen in desired path to achieve the desired retention time for effective screening before the material gets discharged from the outlet spout. During this process the particles smaller than the mesh aperture fall through the mesh and the oversize material gets discharged from the outlet spout. This process is repeated on the next mesh in case of multi deck screening. Available in different models.

• Capacity: 60-450kg/h
• Voltage: 220 V
• Material: Stainless Steel
• Motor drive: 2 hp to 3 hp

• weight: 800 kgs

MILLTEC offers a versatile rotary sifter which can segregate input rice into different categories.Wedge clamping mechanism for better Sieve frame clamping & positive leak proof which enhances performance.Precision rotary mechanism for longer life and smooth running.

• Frequency: 40-50 Hz
• Capacity: 100-200 Kg/hr
• Color: Blue
• Voltage: 220 V
• Power: 0.75 To 10 Kw
• Brand: Tridev
• Material Grade: MS / SS
• Material: Mild Steel
• Usage/Application: Industrial
• Power Source: Electric
• Size: 600-4000mm
• Frequency: 50/60 Hz

SS Rotary Sifters, Microwave Dryer / Roaster, Foot Mounted Rotary Vibrators

rotary sifters, Aluminium Foil Making Machine, metal casting machinery

rotary sifter, Rotary Air Lock Valve, rotary air lock feeder

rotary sifters, rotary valve, Bag Discharge Station

rotary sifter, Pin Mill Machine, industrial pulverizers, Ribbon Blender Mixer

rotary sifters, Plan Shifter, grain color sorter, Vibro Separator