Rubber Packings Dealers

• sizes: 12 mm to 1000 mm.
• Speed: 50 meters/minute
• Installed power: 1.5 kW

Krishna Engineering Works dealing on manufacturing and exporting Roll Wrapping Machine from India. A genuine specialized supplier of Roll Wrapping Machine. We are a leading manufacture, export, and supplier of Roll Wrapping Machine. Our machines are designed with a wide range of quality for long lasting heavy duty process, especially for cutting in different sizes from 12 mm to 1000 mm. We are a leading manufacturer, exporter and supplier of all types of Roll Wrapping , Stretch Wrapping , Stretch Roll Wrap Machine , Carton, Water Tank , Cloth Roll , Nylon Roll, etc. Also, manufacturer of Doctoring Rewinding Machine

• Size: 50MM - 2200MM
• Brand Name: AR AR RUBBER CHEVRON PACKING SEAL
• Model Number: AR AR CPS
• Minimum Order Quantity: 50 Piece

To seal some compartment so that no air, dust or fluid pass in or out. This rubber product is almost similar to the rubber gasket.

• Pressure  Psi bar: to 500 psi (34 bar) rotary / centrifugal ; to 2000 psi (138 bar) valves
• Shaft speed M/s: to 1500 rpm
• Density g/cm3: 1.4
• Temperature °C:   -3280F (-2000C) to 12000F(6500C Steam) & (33000C Non-oxidizing media)
• PH range:    0 -14

APPLICATIONS / USES : Aramid packing with rubber core The packing made of high quality aramid fibers with PTFE-lmpregnation and lunricant additive. Blended with silicone rubber in central position, having excellent compression compensation power. High elastic rubber core can absorb vibration to control leakage better.The packing made of high quality aramid fibers with PTFE-lmpregnation and lubricant additive. Extremely hard wearing. It shows good chemical resistance, high elasticity and very low cold flow. Compare with other kinds of packing, it can resist more severe media and higher pressure.It is an universal packing, can be used for pumps in all types of industry such as chemical, petrochemical, pharmaceutical, food and sugar industries, pump and paper mills, power stations etc. It is also a durable packing able to withstand granular and abrasive applocatons.   Product Description :Designed for serve on superheated steam, solvents, liquefied gases, sugar syrup and other abrasive fluids.Sigma 216 Packing is recommended for Oil & Solvents, caustics, Acids, Alkalies, Dyes, Chemicals Liquid ammonia & carbonate solution under high pressure conditions, waste water treatment plants. Agressive organic / inorganic Chemical Rotary and reciprocating plant pumps & valves, oils, corrosive gases, Dyestuffs, synthetic resins,White and black liquor, wood pulp, detergent, hydrocarbons, steam valves, metering pumps, reactors, mixers, autoclave glands, bauxite slurries, bottom ash slurry pumps, mineral handling slurries, tailings pumps and other slurry processing applications.   Prime Feature   • Long maintenance free service life.  Minimal shaft wear and leakage • Pliable, wear-resistant and dimensionally stable. Rugged and non-toxic • Extended service life by up to 400% in harsh environments • Six times better heat conduction as against other PTFE packings at comparatively high speeds. • Significantly low thermal expansion thus resisting ‘ over expansion’ extrusion under service. • Suitable to centrifugal & reciprocating pumps even at high pressure • Excellent in abrasive application. Well proven with aggresive media

Moulded Rubber Packing, high temperature and excellent Compression set resistant using NBR, EPDM, VITON, SILICON, AFLAS, NR, POLYACRLIC etc.Application:- Automotive Non-Automotive applications Domestic appliances Electrical and Electronic Applications.

Being one of the chief Manufacturers, Exporters, and Suppliers of Rubber Packings in Gujarat, India, we are advancing unrestrainedly in the direction to conquer the demands of the market where the Packings are used significantly. We are equipped with advanced machinery and modern technology to cater to the widespread market. We make sure to incorporate features such as durability, high strength, and dimensional accuracy into our Rubber Packings. We are, furthermore, adept in meeting urgent and voluminous demands for Rubber Packings.

• Std. Size: 1/2" * 1/2 ", 14*14 MM

Cartridge Heater is manufactured in SS, Brass pipes with high purity MGO (Magnesium oxide powder ),high quality in chrome wire. Cartridge heater is inserted into close fit hole of dies mould or plates. Cartridge Heater are manufactured in any diameter and length. MGO powder insulation assures high Electric strength and fast heat transfer and low oxidation of the resistance wire. It is used to heat rubber molding dies, hot plates, plastic injection moulds, sealing jaws of packaging & Pharmaceutical machines. Cartridge heater with built in thermocouple temperature sensors for runner less mould are available.

• Temperature: 230 Deg C
• Pressure: 200 Bar
• pH: 2-12

Marine Equipment, Agitator Nutsche Filter, agitator reactor vessels, mixers, Clinker Grinder, etc. in chemical, drugs, dyes and pigments, pesticides and allied process industries, Power Stations etc. Material Hollow Core Gland Packing are specifically designed to reduce packing wear and shaft / sleeve wear in slow rotating equipments with excessive shaft run – out. Hollow Core Packing resists gland follower load and excessive run-out or whip in shaft.   Type   PGE® Style 2150 Rubber Core Packing Braided with Graphite/PTFE

Revata Engineering manufactures packer elements from special elastomer / rubber compounds using cutting edge molding methods. The Packer Element compound must be able to withstand very hostile environments and produce the required isolation in Oil wells. When Packer Elements are manufactured with the right materials and installed properly, the tools should perform at its best. The Packer Elements manufactured by Revata Engineering often stay in Oil Wells for long periods of service and after they are retrived, they look as if they could still function for a few more days.   Revata Engineering Packer Elements are proven to give the desired results when they are inserted on packers and put into the most hostile well environments. With Revata Engineering Packer Elements, the operation of tools in the Well becomes worry free.   Revata Engineering manufactures packer and other components to fit most manufactures packers, bridge plugs, tubing anchors etc. Some of the OEM companies include ARROW, BAKER, ELDER, GUIBERSON, HALLIBURTON and others. Contact us for more detailed information on our Packer Elements

• Thickness: 0-10 Mm, 10-20 Mm
• Color: Black, Z-black
• Feature: Fine Finished, Eco-friendly, Highly Durable
• Shape: Circular,Round
• Materials: Rubber
• Packaging Type: Corrugated Boxes,Plastic Bags

We manufacture diffrent kinds of vibration pads, rubber packings and insulators. We cater multiple industries with our this product range.

• Material: RUBBER
• Color: ANY
• Brand Name: BLACKITE
• Size: ANY
• Inner Diameter (Millimetre): ANY
• Outer Diameter (Millimetre: ANY

• Feature: Impeccable finish,Chemical resistance, Dimensional accuracy

We are supplying products like as rubber packing, pvc & gasket.