Industrial Scrubber System
500,000 Per Piece
1 Piece (MOQ)
Dry scrubber system
100,000 Per Piece
1 Piece (MOQ)
Best Deals from Scrubber System
Scrubber System
100,000 Per Set
1 Set(s) (MOQ)
A dry or semi-dry scrubbing system, unlike the wet scrubber, does not saturate with moisture or the flue gas stream that is being treated. In some cases no moisture is added; while in other designs only the amount of moisture, which can be evaporated in the flue gas without condensing, is added. dry scrubbing system can be categorized as dry sorbent injectors (dsis) or as spray dryer absorbers (sdas). Spray dryer absorbers are also called semi-dry scrubbers or spray dryers. dry sorbent injection involves the addition of an alkaline material (usually hydrated lime or soda ash) into the gas stream to react with the acid gases. The sorbent can be injected directly into several different locations: the combustion process, the flue gas duct (ahead of the particulate control device), or an open reaction chamber (if one exists). The acid gases react with the alkaline sorbents to form solid salts that are removed in the particulate control device. These simple systems can achieve only limited acid gas (so2 and hcl) removal efficiencies. Higher collection efficiencies can be achieved by increasing the flue gas humidity (i.e., cooling using water spray). These devices have been used on medical waste incinerators and a few municipal waste combustors. in spray dryer absorbers, the flue gases are introduced into an absorbing tower (dryer) where the gases are contacted with finely atomized alkaline slurry. Acid gases are absorbed by the slurry mixture and react to form solid salts that are removed by the particulate control device. The heat of the flue gas is used to evaporate all the water droplets, leaving a non-saturated flue gas to exit the absorber tower. Spray dryers are capable of achieving high (80 + %) acid gas removal efficiencies. These devices have been used on industrial and utility boilers and municipal waste combustors. typical applications scrubbing fine particulates and acid gases emitted from incinerators, furnaces and boilersscrubbing gas phase particulate formations in electronics, chemical and heavy metals industriessulfur dioxide and hydrochloric acid removal
wet scrubber system
Get Price Quote
We have well-connected and huge warehouse that helps us in keeping large stock under suitable conditions. Also, we keep it updated to meet set industry standards. Customers should stay rest assured with us for the payment procedures. They can pay us conveniently through wide-ranging payment mediums.Specification and uses : Condition - New Manufactured using in mild steel with various linings Features : High strength Durable Corrosion resistance
wet scrubber system
Get Price Quote
1 Piece (MOQ)
Scrubber Column
Get Price Quote
2 Piece (MOQ)
Our PP FRP / HDPE FRP / PP / HDPE SCRUBBER removes soluble noxious or nuisance gases like hydrochloric acid, sulphur dioxide, ammonia and acid mists above 5 microns. Typical application include-chemical plants, sewage treatment facilities, metal finishing operations and pulp or paper mills.
Chlorine Scrubber System
Get Price Quote
1 Piece (MOQ)
Acid Fume Scrubber System
Get Price Quote
1 Piece (MOQ)
Venturi Scrubber Systems
Get Price Quote
Our range of products include venturi scrubbers and hdpe scrubber.
Frp Scrubber System
Get Price Quote
Located in Maharashtra, India, we are renowned Manufacturer & Supplier of FRP Scrubber Systems in the Indian Territory. We make use of materials like FRP, PVC/FRP, CPVC/FRP, PP/FRP, ECTFE/FRP for imparting strength and durability to these Systems. In addition, Blowers can be designed for a very high CFM and pressure. We design plant type, packed bed type, Venturi type of Scrubbers for separation of dust particles and headers for connecting ducts from various vessels to a single outlet. Get them at marginal prices, from us.
wet scrubber systems
500,000 Per unit
Acid Gas Scrubber System
Get Price Quote
2 Piece (MOQ)
Impingement Scrubber System
Get Price Quote
We are a major Manufacturer and Supplier of Impingement Scrubber System. This is a low energy device that offers an advantage of a particulate collection, cooling, condensing, and gas absorption all in a single unit. Gases enter the unit from the bottom and flow upward through a series of trays, each containing perforations designed to achieve the highest efficiency with the minimum pressure drop. Scrubbing liquid is introduced above the top tray and cascades downward to the lower trays. The turbulent mixing in each of these zones provides intimate contact where gas scrubbing and cooling occurs. Units are furnished with a final demister section to minimize the liquid carry-over problems before the cleaned gases are exhausted via the top outlet. The type and number of trays are selected to meet the process requirements. Sieve or impingement or bubble cap type trays are incorporated with the single or dual downcomers to suit the application. The impingement wet scrubber is particularly useful where the particulate matter would foul a packed bed type scrubber and on applications where gas absorption and or sub-cooling is required.
Fume Scrubber System
Get Price Quote
Fume Scrubber System, flow fan, Frp Lining Tanks, Acid Fume Scrubber System
Industrial Scrubber System
120,000 - 250,000 Per Nos
1 Nos (MOQ)
Scrubber System
68,500 - 750,000 Per Unit
1 Piece (MOQ)
Scrubber System is a group of air pollution system that helps to remove particulates, harmful components and gases from industrial exhaust streams. It is highly efficient and effective in removing soluble odours and fumes with capacities from 100 CFM to 75,000 CFM. Lakhi Blower Industries is one of the trustworthy Scrubber System Manufacturers in Vapi, Gujarat. Our offered range is available in endless configurations to suit the multifarious demands of different customers. Salient Features Of Our Scrubber Systems: Highly robust and reliable to use Best for serving several purposes Durable and dependable Easy operation and lasting performance Known for their efficient working Have a very low maintenance need Type Of Scrubber Systems: Wet Scrubber System Dry Scrubber System Air Pollution Scrubber System Send Your Enquiry Now! Being one of the noteworthy Scrubber Systems Suppliers and Wholesaler in India, we assure the timely delivery and round-the-clock-customer support. Contact us straight away to get our assistance.
Scrubber Pollution Control System
100,000 Per
1 Piece (MOQ)
Fume Scrubber System
Get Price Quote
Our enterprise is counted among the reliable enterprises, offering a range of fume scrubber system. These are manufactured under the supervision of experienced quality inspectors as per international norms and standards. The offered scrubber systems are widely used for fume absorption and extraction systems. Further, we provide customized version of these fume scrubber systems as per the specifications drawn by the esteemed customers.
Scrubber System
Get Price Quote
We hold the expertise in manufacturing and supplying a wide assortment of scrubber system (FRP/PP). Ideal for those industries that depend on FRP, PP/FRP, these scrubbers help in eliminating the harmful gaseous pollutants and other contaminated particulates that arise due to the various industrial processes. These eco-friendly scrubbers are designed and manufactured following the high definition engineering principals keeping in mind the set industry standard. Specifications: Material: PP, FRP Maintenance: Easy Wet scrubber, Packed Bed columns, Absorption columns Chlorination column, Spray tower Venturi scrubbers
Mobile Scrubber System
Get Price Quote
We are one of the leading Manufacturers, Exporters and Suppliers of Mobile Scrubber System in Vadodara, Gujarat. Our Mobile Scrubber is fabricated using high-grade glass ensuring excellent quality. Our Scrubber System is easy to use and have long functional life. The Mobile Scrubber that we offer is available at the most reasonable prices in the market. We can deliver Mobile Scrubber System within the stipulated time frame. Description : Super offers mobile scrubbers fabricated in all glass The SCR100/150 is an all glass model mobile scrubbing system for laboratories. The system is mounted on SS tubular supporting structure and is maneuverable easily. The SCR 100/150 Scrubber consists of : Glass reservoir for the circulating media Magnetically coupled seal-less PP centrifugal pump Borosilicate glass coil type cooler Packed column of Borosilicate glass with glass raschig rings.