Sewage Pump Dealers

• Pump Type: SLURRY
• Connection Type: DOL
• Number of Poles: 6
• No. Of Stages: 1
• Motor Rating (Kw/HP): 37.2/50
• Voltage (V): 415
• Phase: 3
• Maximum Current (A): 65
• Rated Speed (rpm): 960
• Frequency (Hz): 50
• Motor Insulation Class: H
• Max. Start/Stop per hour: 15
• Max. Temp. of pumped Fluid: 40 °C
• Motor Type: Water Cooled
• Total Head (m): 40
• Discharge (LPM): 6900
• Delivery Size (mm): 150
• Pump Weight (Kg): 975
• Solid Handling (mm): 40

MINI DEWATERING SEWAGE SUBMERSIBLE PUMP Model No : MDSP Available Features : Stainless steel (up to 3 hp) & Cast Iron (5.5 & 7.5 hp) Operating Range: Pump Casing:- Cast Iron, Impeller:- Cast Iron, Shaft:- Stainless steel, Motor Body:- Stainless steel (up to 3 hp) & Cast Iron (5.5 & 7.5 hp), Seal Housing:- Cast Iron, Motor Cover:- Cast Iron Pump Casing:- Cast Iron, Impeller:- Cast Iron, Shaft:- Stainless steel, Motor Body:- Stainless steel (up to 3 hp) & Cast Iron (5.5 & 7.5 hp), Seal Housing:- Cast Iron, Motor Cover:- Cast Iron

• Driven Type: Electric
• Certification: CE Certified
• Warranty: 1 Year
• Country of Origin: India
• Delivery Size: Up to 200 mm
• Capacity: Up to 800 M³/hr
• Head: Up to 90 M
• Temperature: (-) 10 °C to 140 °C

SHM are horizontal non-clog pumps having single stage, single suction with back pull out type design. SHS are vertical non-clog pumps for wet pit applications. The pump section is suspended by a column pipe which also protects the transmission shaft. These pumps can be offered with a column length up to 6.5 m. The impeller is single suction type non-clog, free flow dynamically balanced. For SHM pumps the standard lubrication is grease and the optional one is oil. In case of SHS pumps the lubrication is grease based. These pumps are widely used in paper industries, water carrying gravel and so on. Features: Solid size up to 105 mm Back pull-out design Gland packed / Mechanical Seal 50 Hz / 60 Hz availability Also available in vertical execution Applications: Sludge Sewage Power material slurries Sugar factory waste  

8000 LPM Quartz Water Filter Plant Slurry Pump, Butterfly Valve

• Model Name: Moviboost K,V,Vp
• Capacity: Upto 630 M3/hr
• Head: Upto 160 M
• Temperature: Upto 70° C
• System Discharge Pressure: 10 & 16 bar
• Inlet Pressure: Upto 10 Bar
• Supply Voltage: 3 Phase, 415 Volts, 50 Hz
• Drive: 2 Pole Electric Motor

Design Fully automatic pressure boosting units available in three variants - kt, vt & vpt with 2 to 6 vertical high-pressure pumps and fully electronic control of the required supply pressure with two standard volt-free contacts for fault indication. suitable for residential buildings, hospitals, office buildings, hotels, departmental stores etc. pressure boosting in:   Applications Resedential buildings Hospitals Offices Hotels, Departmental Stores, Industry Etc.

• Brand Name: Kirloskar
• Head: 6 to 21 meters
• Capacity: 20 to 1 LPS
• Power Rating: 0.37 kW - 3.7 kW
• Voltage Range: 300 to 440 volts (3 phase)

CW pump body of stainless steel, impeller is of cast iron, class of insulation F type and ingress protection IP68. This pump widely used in basements of residential and commercial buildings, civil and industrial construction sites, mines and municipal or rural management projects.Features High performance and efficiency Low energy use - high cost savings Unmatched protection and low maintenance Robust construction for higher durability Complete CED coating Application Pump clean water or drain sewage from Basements of residential and commercial buildings Civil and industrial construction sites, and mines Municipal or rural management projects Utility pipeline containing solid and fibrous materials

Boat Yacht Caravan Marine Shower Sump Pump Drain Kit System - 24v - 750 GPH - Multi-port Inlet• Removable mesh filter allows easy cleaning.• Clear screw-down cover. Check valve on outlet• Ignition protected. Handles waste water from more than one tapping point• Tight fitting lid to minimize splashing and odors• Easy installation, Multiple inlet ports for versatile usage: Features: 1. Removable mesh filter allows easy cleaning.2. Clear screw-down cover.3. Check valve on outlet4. Ignition protected.5. Handles waste water from more than one tapping point6. Tight fitting lid to minimize splashing and odors7. Easy installation8. Multiple inlet ports for versatile usage:1 x 3/4"1 x 3/4" or 1 x 1"1 x 1 1/8" or 1 x 1 1/2"9. Discharge hose:3/4

• Country of Origin: India
• Type: Slurry Pump
• Brand Name: Slurry Pumps & Engineers
• Material: Rubber Lined / PU Lined / Hi-Cr. / Duplex Steel / Special Alloys Etc.
• Driven Type: Electric
• Motor Phase: 3 Phase
• Temperature: Upto 100 Deg C

• Material: Mild Steel
• Color: Blue
• Automatic Grade: Automatic
• Pressure: High Pressure
• Application: Industrial
• Voltage: 220V
• Warranty: 12 Months
• Country of Origin: India

• Country of Origin: India
• Series: MTV
• Capacity: Upto 500 M3/Hr
• Head: Upto 60 Mtrs
• Temperature: Upto 80°C
• Casing Pressure: Upto 16 Bar
• Material: Stainless Steel & Nickel Alloy

Vertical single stage sump pump compliant with ISO 5199 and optional features with API 610 bearing spans.The vertical sump pump incorporating best in class hydraulic design for efficient and reliable service. The vertical sump pump can be customized to meet a wide range of needs. Compliance  with ISO 5199 and available in wide range of hydraulic wet-ends and a wide variety of materials of construction. It is also available with multiple mechanical seal options and sump depths.Pump Description : Single stage vertical centrifugal pump Radially split casing with flanged connections Cast iron or cast steel motor support assembly Column and discharge pipe assembly, Sole plate mounted Enclosed impeller, Open and Semi Open impeller based on application need. Bearing housing with bronze guide bearings (optional materials available) Labyrinth oil seal at bearing housing (optional design) Grease lubricated thrust bearing (standard) or oil lubricated thrust bearing (optional) Gland Packed / many optional mechanical seal types available Maximum of 4 m sump depth can be offered. Benefits : Back Pull-Out design for ease of maintenance allows easy maintenance. Optimum Efficiency Various materials of construction available Durable Mechanical seal Compact design Standards Compliance : Testing Standard: ISO5199, HI standards Construction standard: ISO2858 Bearing Housing Lubricated : Thrust Bearing : Grease Lubricated Oil Lubricated Oil mist lubrication technologies Radial Bush Bearing : Product Lubrication Optional fluted rubber with rigid shell, bronze, carbon and other special alloys are available. Petro-coke cartridge is also available. Material of Construction : Stainless Steel SS316 Stainless Steel SS304 Duplex Stainless Steel Super Duplex Stainless Steel Nickel Alloy

• Type: Automatic
• Certification: CE Certified
• Application: Industrial
• Voltage: 220V
• Pressure: High Pressure
• Structure: Diaphragm Pump
• Warrenty: 1 Year

• Brand Name: Jasco
• Max. Flow: 3500 m3/hr
• Max. Head: 85 m
• Discharge Size: 50 TO 500 MM
• Rating: up to 373 KW/ 500 H.P.
• Speeds: 750/1000/1500/3000

Usage : Water in tank like restaurant, railway, factory, housing complex, Tannery and power plants. Paper pulps, paper mills. Sea water Drainage & sewage system Transfer of suspended solids Raw water pumping applications.

• Brand Name: Cosmos Pumps
• Motor Phase: 3 Phase
• Max Flow Rate: 1400 LPM
• Power: 20 HP
• Head: Medium-28 Mtr
• Type: Dewatering Pump
• Driven Type: Electric
• Material: Cast Iron
• Usage: Dewatering
• Number Of Stages: Multi Stage Pump
• Capacity: 1400 LPM

Vertical Sump Pump can be used in any installation or specially where the saving of space is important factor and most important where liquid is difficult to lift because of nature like temp, corrosiveness etc. These pump are designed for use where the liquid handled to be is of highly corrosive. Nature or where non - adherence of product or zero metallic contamination is must. These pumps are equally ideal for continuous or intermittent service for handling Corrosive as well as ultra pure chemicals without fear of corrosion or contamination. High Temperature services : Maximum working temperature is 110 C / 200 C. Length : Pumps lengths available from 1 to 12 with flow rate up to 50m3/h or 120 meter head. Higher capacities and head available on request and even multistage pump can be also made. Models : Available in conventional or tailor-made configuration. Several models such as suction extension with float switch, duplex pumping station with float switch (auto on/off device) also available. Application Fields : These pumps are in extensive use in the fields of : Pollution Control Filtration Transferring Corrosive Chemicals Slurries Bio gas plants Sewage Waste water treatment plant Phosphoric Acid Plant. H,PO, H2SIFs, H2SO4, HF And Their Mixtures Gas washing plant Scrubbed liquids containing, F,CL,SO2, Ammonia Water treatment plant Any types of acidic water lifting M.S Vertical pump are used for transfer of sulphuric acid 98 %. OLUM, CLOTO, NEPTHA

• Weight: 0-10kg
• Voltage: 220V
• Power: 1-2kw
• Driven Type: Electric
• Warranty: 1year
• Automation Grade: Automatic

We are ranked amidst the prominent Washing Machine Drain Pump Manufacturers and Suppliers in India. The Washing Machine Drain Pump, which we offer, is higher in efficiency and incorporates advanced technique. Our Washing Machine Drain Pumps can be availed in bulk quantities, as per the requirement of the clients.

• Surface Finishing: Polished
• Material: Metal
• Color: Silver
• Application: Industrial
• Durability: Long Life
• Resistivity: Rust Resistant

The Hydro Ejector, we offer, are fabricated using the latest technology in compliance with the laid industry norms and standards. The different type of Spares, that we make available, includes nozzle tip for hydro ejector and nozzle plate for hydro ejector. Further, our Hydro Ejector Spares available in different specifications & sizes, are widely used in thermal power plants. Rely on us, for on-time deliveries and competitive prices. From Rajkot, Gujarat, we are the celebrated Manufacturer and Supplier of Hydro Ejector.

• Type: Slurry Pump
• Certification: ISO 9001:2008, MSME
• Application: Sand Gravel Dredging, Sand Gravel Mining
• Voltage: 220V, 380V, 440V
• Condition: New
• Theory: Axial Flow Pump, Centrifugal Pump, Electromagnetic Pump, Reciprocating Pump, Rotary Pump
• Driven Type: Electric, Hydraulic, AIR
• Pressure: High Pressure, Low Pressure, Medium Pressure
• Structure: Diaphragm Pump, Gear Pump, Multistage Pump, Single Stage Pump
• Motor Power: 0-3Hp, 3-6Hp, 6-9Hp
• Warrenty: 1yr
• Product Name: CHEMICAL PROCESSING PUMP

• Country of Origin: India
• Certification: CE Certified
• Pressure: High Pressure
• Shape: Rectangular
• Voltage: 220V
• Finishing: Polished

• Head: Up to 100 Meters
• Capacity: Up to 200 m3/Hr
• Speed: 1450 to 2850 RPM
• Pump Size-DN: 25mm To 150mm
• Temp: Up to +150° C

Submersible Dewatering Pump LDWP Series: - These pumps have an excellent performance capacity with high motor power combined with heavy duty design. It is compact portable and self priming with bottom suction and top discharge which enables the pump to dewater up to the lowest level. Pump is completely submerged in process liquid so no priming is required for unloading of underground tanks. It is also designed with dual mechanical seal for protection of inbuilt motor. These pumps are design easy to maintenance at site. Cable of suitable rating x 4 core submersible cable with10 meters length provided free with the submersible dewatering pump. These pumps are also available with inbuilt thermal protection (OPTIONAL) & moisture protection (OPTIONAL).   Material Of Construction POLYPROPYLENE (P.P) ULTRA HIGH MOLECULAR WEIGHT (UHMW-PE) POLYVINYLIDENE FLUORIDE (PVDF) GLASS FILLED POLYPROPYLENE (G.F.P.P) POLYTETRAFLUOROETHYLENE (PTFE) CAST IRON CAST STEEL (WCB) CD4MCu S.S 316 (CF8M) S.S 304 (CF8) S.S 316L (CF3M) HASTELLOY B (N12MV) HASTELLOY C (CW12MW) ALLOY 20 (CN7M) DUPLEX SS (GRADE 4A,5A,6A) PHOSPHORUS BRONZE) TITANIUM NI-HARD HARD METAL CASTINGS GUN METAL Applications And Industries Served UNLOADING OF UNDERGROUND TANKS, PITS AND VESSELS WATER TRANFER INDUSTRIAL WATER DRAINAGE HANDLING DIRTY WATERS EXCAVATING DRAINAGE IN BUILDING TRADE MINING INDUSTRIES CIRCULATING FOUNTAIN WATERS SEWAGE AND WASTE WATER MUNICIPALTIES STELL INDUSTRIES COLD ROLL MILL AND HOT STEEL MILL DESCALING OPERATIONS CHEMICAL INDUSTRIES BUILDING DAMS AND TUNNELS RIVER WATER FLOOD WATER CONTROL EFFLUENT IRRIGATION MARINE , AQUACULTURE

• Brand Name: Nagpal Natraja
• Driven Type: Pnemetic
• Condition: New
• Application: High Viscous Liquid,Slurry Transfer
• Certification: ISO 9001:2008 Certified
• Type: Diaphragm Pump,Flexo Printer Slotter Machine
• Country of Origin: India
• ink pump: Pnemetic ink pump
• Deal only with: New

Since the inception of our firm in this domain, we are actively engaged in offering a wide array of flexo printer ink pump. Features: high performance low maintenance ergonomic design specifications: material: metal, rubber head: 2~9 m flow: 560~22000 m3h temperature range: 0~150 c