Shot Peening Equipment Dealers

• Voltage: 220V
• Automatic Grade: Automatic
• Power: 3-6kw
• Driven Type: Electric
• Warranty: 1year
• Weigt: 100-1000kg

Special shot peening of individual components by using rotary table machines / satellite table machines. The parts are placed on the rotating table, where they continuously pass through the blasting area. This guarantees uniform blasting of the surface. This type of machine is available as indexed and batched versions. The essential component of a satellite table machine is the indexing mechanism which rotates the work piece through fixed positions within the blasting machine. The satellite table concept provides the advantage that new parts can be loaded and unloaded while others are processed. The machines can be equipped with turbines, injection or pressure blasting principle. These types of blasting systems are commonly in use at the automotive industry and automotive suppliers. The machines are often used for peening as well as cleaning applications as precise, homogenous results are achieved. These machines can be combined with robots for automatic loading and unloading to create fully integrated manufacturing cells as part of a continuous/in-line process.

- Shot Peening machine is used for surface peening of leaf springs to give extra life to the spring.  - The leaf spring is placed on the conveyor belt, which moves at a speed of 3 meters/minute.  - In the main blasting chamber concave surface of the spring is bombarded with very high velocity shots.  - The impact of the shots leaves a impinge impression on the surface which increases the fatigue life of the spring by 50%     Main parts of the machine: Main chamber/ Blasting chamber: Here the spring is subjected to shot peening. The inner side is protected by liners made of rubber and M.S. Care has to be taken to see that the condition of the liner is inspected every week and necessary replacement be done wherever wear & tear is observed. Shot Peening Wheel: Here the shots are thrown at very high velocity by the wheel and blades. Main parts for inspection are: Cage, Impeller, Blades, bare wheel, bearing assembly, V belts. The blades should be balanced to avoid vibrations and breakage. Pneumatic Cylinder: This operates on compressed air, which is supplied through a solenoid valve. The main function is to start supply of the shots and stop supply when shutting off the machine. Separator: This has a screen to separate the big unwanted particle, which may have accidentally entered the shots. Bucket elevator: This conveys the shots from the bottom of the machine to the separator at the top. The bucket belt can be tightened by the screws at the top. The belt and the buckets have to be inspected every 15 days for wear. Screw conveyor: This conveys the shots to the bucket elevator. Main conveyor system: This conveys the leaf springs through the machine. There is a variable speed drive unit for controlling the speed of the belt. Doors: They are provided for inspection of the liners in the main chamber. These are fitted with limit switches, which provide safety that the machine will not operate when the doors are open. 

• Application: Industrial
• Automation Grade: Semi-Automatic

• Certification: CE Certified, ISO Certified
• Automatic Grade: Automatic
• Voltage: 220V
• Driven Type: Electric
• Material: Mild Steel
• Surface Finish: Color Coated
• Phase: Three Phase
• Frequency: 50-60 Hz

• Certification: ISO Certified
• Voltage: 220V
• Automatic Grade: Automatic
• Warranty: 1year
• Weigt: 100-1000kg

MEC automatic glass bead peening machine is designed to peen API threads of drilling components as per MIL-S-13165 standard. To provide two axes shot peening operation for the generation of controlled compressive stress and to improve the galling resistance of the internal & external threads roots on the pipes at both ends. Machine is suitable for peening job of maximum size 12 mtrs [L] &12" Dia.   Standard: Pneumatic operated front door for easy loading Motorized roller arrangement for job rotating 2 Controlled speed gun manipulation for OD & ID peening Quick change OD & ID peening pressure nozzles Large work envelope in cabinet High production machine Offline vibratory sieve classifier unit for size classification Offline spiral type separator for shape classification Gravity feed grit recovery system Easy part pixture change over Work car movement for extended length of job High volume pressure chamber for long duration peening Optional: Automatic shot peening media adder Rotary lance drive. Shot flow control magna valve Custom part holding fixtures

• Voltage: 220V
• Automatic Grade: Automatic
• Power: 1-3kw
• Driven Type: Electric
• Speciality: Rust resistance
• Phase: Three Phase
• Brand Name: Aerowheel Surface Finishing

• Certification: CE Certified
• Voltage: 220V/380V
• Warranty: 1 Year
• Type: Automatic
• Power: 7.5 Kw
• After-sales Service Provided: Spare Parts

Features : We offer a wide range of Shot Peening Machines that are of high-quality standards and can be used in various areas including Military and commercial aircraft, Automobile transmissions, Helicopters, Rock bits, and Oil field equipment. Our Shot Peening machines remove the Tensile Residual Stress caused by various bending and heat treatment procedures.  This leads to an increased life span of parts while working at their maximum load capacities. Our machines are capable of improving the lifespan of Landing gears, gearwheels, gear shafts, turbine blades of aircraft, valve springs, suspension springs, connecting rods, and many others. Our Team has vast experience in handling orders and providing customizations so that you can be satisfied.  Once you place an order with Metablast you will experience pure satisfaction.

• Application: Industrial
• Automation Grade: Automatic
• Capacity: 200
• Model: TBI 3CFT

We are offering a high-tech range of Robotic Shot Peening Machine to customers in India, UAE, Saudi, Sri Lanka and Australia. Our Robotic Shot Peening Machine is fully programmable and has various user friendly features. It is sturdy in construction, durable and offers long functional life. We are an eminent Robotic Shot Peening Machine Manufacturer, Exporter and Supplier in Rajasthan (India). We can customize our machine as per the customer’s provision at very nominal prices. Robotic Shot Peening Machine  is used in cleaning  rust on  gears, torsion bars, springs, valves, exhaust manifolds, blades, discs, turbines. Features : Smooth edges Adjustable

• Country of Origin: Made in India
• Voltage: 280 V
• Usage/Application: Industrial
• Power Source: Electric
• Frequency: 60 Hz
• Phase: Three Phase
• No of Door: Single Door

• Fuel: Electric
• Condition: New
• Application: Container / Bottle Cleaning, Deflashing, Sterilizing / Disinfecting
• Material: Metal / Coil

Raw materials that we source from the trusted vendors are used as input in the production procedure and thus we check them against varied quality parameters before procurement. With the assistance of our modern transportation facilities, we are able to deliver the orders on time.

• Voltage: 380V, 440 V
• Driven Type: Electric, Compressor
• Warranty: 1 Year
• Weight: weight will vary depending on each models
• Use: Foundry, Forge Shops, Automobile
• Surface: Painted Surface
• Feature: Easy to instal and commission, however it will vary from model to model
• Material: Steel, Manganese Steel etc.
• Pack type: Wooden Box, Gunny Bags & Carton Box
• Speciality: Rust removal and surface preparations with quality improvement of Base Metal.

• Capacity: 200 Ton
• Automatic Grade: Automatic
• Model: TBI 3CFT

What is shot peening: Shot peening is a cold working process used to produce a compressive residual stress layer and modify mechanical properties of metals. It entails impacting a surface with shot (round metallic, glass or ceramic particles) with force sufficient to create plastic deformation. It is similar to sandblasting, except that it operates by the mechanism of plasticity rather than abrasion each particle functions as a ball-peen hammer. In practice, this means that less material is removed by the process, and less dust created.

Shot peening machine It is mainly useful for high production output of cleaning of components hard and ferrous and non-ferrous components.

We invest in advanced training to promote knowledge in the area of technical development, creating preconditions for innovations. We possess a Design & Drawing office with AutoCAD facilities and fully equipped workshop. Our team comprises of more than 25 persons including skilled engineers, technicians, managers and workmen. We offer quality services to our clients with the backing of our experts who are continuously involved in providing unique and innovative solutions.

MEC CNC bead peening machine is designed for effective peening on aero engine component (Blade Airfoils). To generate the controlled compressive stress to the surface and to enhance the surface properties, increase fatigue strength by creating small pores, increase life of components and prevent galling, ferreting, cracking & corrosion.The system has capacity to peen upto 48" length of blade.