Shot Peening Machine Dealers

- Shot Peening machine is used for surface peening of leaf springs to give extra life to the spring.  - The leaf spring is placed on the conveyor belt, which moves at a speed of 3 meters/minute.  - In the main blasting chamber concave surface of the spring is bombarded with very high velocity shots.  - The impact of the shots leaves a impinge impression on the surface which increases the fatigue life of the spring by 50%     Main parts of the machine: Main chamber/ Blasting chamber: Here the spring is subjected to shot peening. The inner side is protected by liners made of rubber and M.S. Care has to be taken to see that the condition of the liner is inspected every week and necessary replacement be done wherever wear & tear is observed. Shot Peening Wheel: Here the shots are thrown at very high velocity by the wheel and blades. Main parts for inspection are: Cage, Impeller, Blades, bare wheel, bearing assembly, V belts. The blades should be balanced to avoid vibrations and breakage. Pneumatic Cylinder: This operates on compressed air, which is supplied through a solenoid valve. The main function is to start supply of the shots and stop supply when shutting off the machine. Separator: This has a screen to separate the big unwanted particle, which may have accidentally entered the shots. Bucket elevator: This conveys the shots from the bottom of the machine to the separator at the top. The bucket belt can be tightened by the screws at the top. The belt and the buckets have to be inspected every 15 days for wear. Screw conveyor: This conveys the shots to the bucket elevator. Main conveyor system: This conveys the leaf springs through the machine. There is a variable speed drive unit for controlling the speed of the belt. Doors: They are provided for inspection of the liners in the main chamber. These are fitted with limit switches, which provide safety that the machine will not operate when the doors are open. 

• Voltage: 220V
• Automatic Grade: Automatic
• Power: 3-6kw
• Driven Type: Hydraulic
• Warranty: 1year
• Material: Metal

Coil Springs fitted in the Rail Coaches; Wagons and Automobile Industries get affected with repeated torsion & compressive loading which causes the fatigue & the resultant is earlier failure of coil springs. To enhance the fatigue life of coil spring shot peening is mandatory. a number of peening solutions that specifically target the spring peening industry. The springs are loaded on the revolving rollers. The springs are loaded from one end & fed in the blasting cabinet where they are shot peened. The springs are unloaded from the other end of the blasting cabinet. The cabinet is protected by Mn. Liners for longer life. The shot are fed automatically by soundabrator valves for the wheels operated by solenoid valve & pneumatic cylinders. Dust generated during the process is being sucked by high efficiency dust collector along with the shots. These are being separated in media trap before entering the D.C. & the dust gets trapped in the filter bags & clean air is let out in the atmosphere thus keeping the system environment friendly.

• Certification: CE Certified
• Voltage: 220V
• Automatic Grade: Automatic
• Warranty: 1year
• Weigt: 100-1000kg
• Material: Metal

MEC 7-axis Robotic Shot peening machine is designed to peen bucket root & profile blade for steam turbine. To generate the controlled compressive stress to the surface and to enhance the surface properties, increase fatigue strength, enhance lubricity by creating small pores, increase life of components and prevent galling, ferreting, cracking & corrosion. Machine is suitable for peening job of maximum size upto 1500mm. Standard: 6-axis fanuc robotic gun manipulation Door mounted 3 turntables. Turntable drive synchronized as 7th axis of robot. 3 Jobs can be peened simultaneously Very high production machine Quick clamping/de-clamping pneumatic fixtures Vibratory sieve classifier unit for size classification Spiral type separator for shape classification. Quick change & accurately positioned 4 peening nozzles Colored touch screen HMI & Siemens PLC panel Mechanical grit recovery system Easy part fixture change over Closed loop air pressure regulator Shot flow control magna valve – 4 nos Dual pressure chamber for continuous peening Optional: Automatic shot peening media adder Rotary lance drive 2nd door with turntable as 8th axis. Custom part holding fixtures

• Country of Origin: Made in India
• Voltage: 280 V
• Usage/Application: Industrial
• Power Source: Electric
• Frequency: 60 Hz
• Phase: Three Phase
• No of Door: Single Door

• Fuel: Electric
• Condition: New
• Application: Container / Bottle Cleaning, Deflashing, Sterilizing / Disinfecting
• Material: Metal / Coil

Raw materials that we source from the trusted vendors are used as input in the production procedure and thus we check them against varied quality parameters before procurement. With the assistance of our modern transportation facilities, we are able to deliver the orders on time.

Our company is reckoned as one of the prime Manufacturers, Exporters and Suppliers of Shot Peening Machine For Rods. Precisely engineered in different specifications, the Shot Peening Machine is an operating type machine in which rods are fed through diabola into machine. The rotating rods are shot peened to required intensity and come out from outlet portion. All shot peening parameters are monitored in the machine to achieve desired results. Our Shot Peening Machine For Rods is well equipped with Shot Classifier, Shot Velocity Controller, Shot Quantity Controller, Shot Direction Controller etc. It is appreciated for superb quality, user-friendly operation, high reliability and low maintenance. Further, customers can avail Shot Peening Machine For Rods at highly competitive prices. Shot Peening Machine For Rod  is used to clean rust on rods and give hardness to the material.

• Certification: CE Certified, ISO Certified
• Automatic Grade: Automatic
• Voltage: 220V
• Driven Type: Electric
• Material: Mild Steel
• Surface Finish: Color Coated
• Phase: Three Phase
• Frequency: 50-60 Hz

• Certification: CE Certified
• Voltage: 220V/380V
• Warranty: 1 Year
• Type: Automatic
• Power: 7.5 Kw
• After-sales Service Provided: Spare Parts

Features : We offer a wide range of Shot Peening Machines that are of high-quality standards and can be used in various areas including Military and commercial aircraft, Automobile transmissions, Helicopters, Rock bits, and Oil field equipment. Our Shot Peening machines remove the Tensile Residual Stress caused by various bending and heat treatment procedures.  This leads to an increased life span of parts while working at their maximum load capacities. Our machines are capable of improving the lifespan of Landing gears, gearwheels, gear shafts, turbine blades of aircraft, valve springs, suspension springs, connecting rods, and many others. Our Team has vast experience in handling orders and providing customizations so that you can be satisfied.  Once you place an order with Metablast you will experience pure satisfaction.

• Voltage: 380V, 440 V
• Driven Type: Electric, Compressor
• Warranty: 1 Year
• Weight: weight will vary depending on each models
• Use: Foundry, Forge Shops, Automobile
• Surface: Painted Surface
• Feature: Easy to instal and commission, however it will vary from model to model
• Material: Steel, Manganese Steel etc.
• Pack type: Wooden Box, Gunny Bags & Carton Box
• Speciality: Rust removal and surface preparations with quality improvement of Base Metal.

• Voltage: 220V
• Automatic Grade: Automatic
• Power: 1-3kw
• Driven Type: Electric
• Speciality: Rust resistance
• Phase: Three Phase
• Brand Name: Aerowheel Surface Finishing

Shot peening machine a complete line of standard Shot Blasting Machines and custom designed. its performance in the arena of manufacturing Spares for Shot peening machine .

Shot Peening Machine is now a days is used for improving fatigue life of leaf spring. Surface Finishing Equipment Co. have developed and manufactured high production Shot Peening Machine for leaf spring. This machine have two powerful Blast Station and Dual Metallic Chain Conveyor System. Both Chain Conveying System used for conveying leaf spring simultaneously and run parallel  to each another. Two powerful blast station are located strategically at peening angle and fire Shots at pre determined speed on moving leaf spring. Leaf spring are shot peened one by one to required intensity and coverage. The machine is provided with efficient Shot Conveying Recovery & Cleaning System. A powerful Dust Collector is provided to keep machine and environment around it clean. The Control Panel is provided with all Safety Features. The machine is operator friendly and come with all safety features.

MECShot designed, manufactured, installed & commissioned a Robotic Shot Peening Machine for Turbine Blades. A Shot Peening Cabinet, with a acoustical enclosure and 6 Axis Industrial Robot for shot peening of Turbine Blades. The machine is fully programmable.

Shot peening machine It is mainly useful for high production output of cleaning of components hard and ferrous and non-ferrous components.

𝐒𝐮𝐫𝐟𝐚𝐜𝐞 𝐈𝐧𝐭𝐞𝐫𝐧𝐚𝐭𝐢𝐨𝐧𝐚𝐥 offers a comprehensive range of 𝐒𝐇𝐎𝐓 𝐏𝐄𝐄𝐍𝐈𝐍𝐆 𝐌𝐀𝐂𝐇𝐈𝐍𝐄 specially designed & built using high-grade materials and high-tech machinery following international standards.  

• Automatic Grade: Automatic
• Application: Industrial
• Capacity: 5 Ton/day
• Voltage Supply: 220 - 440 V
• Material: Stainless Steel
• Finish: Coated
• Power Source: Electric
• Frequency: 50/60 Hz

What is shot peening: Shot peening is a cold working process used to produce a compressive residual stress layer and modify mechanical properties of metals. It entails impacting a surface with shot (round metallic, glass or ceramic particles) with force sufficient to create plastic deformation. It is similar to sandblasting, except that it operates by the mechanism of plasticity rather than abrasion each particle functions as a ball-peen hammer. In practice, this means that less material is removed by the process, and less dust created.