Single Girder Hoist Dealers

• Material: Metal
• Application: Industrial
• Color: Yellow
• Feature: Easy To Use, Heavy Weight Lifting
• Condition: New
• Automatic Grade: Semi Automatic

A girder is a support beam which is used to denote the main horizontal support of a structure that supports smaller beams. Single girder cranes can be of I-beam type main girder which has a crane span of 18m(59 ft) and load up to 10 tonnes Box-type main girder which spans up to 30m (98 ft) and can uplift load up to 40 tonnes Single girder cranes cost less in many ways as only cross girders are needed; quicker installation; runway beams are lighter enough due to reduced crane dead weight.

Single Girder Hoists are manufactured at Amsak’s modern-day manufacturing facility and offer clienteles the finest in technology. Amsak Cranes offers electrically operated Single Girder wire rope hoists. Amsak Cranes offer Single Girder Hoists with capacity range from 500 Kg to 30 Tons. These Hoists can be offered in single speed / dual speed design. Low Head Room type (LHR) hoists can be offered to meet specific customer’s requirement where space is a constraint. The hoist motor is with IP 54 / 55 enclosures and the hoist gearboxes are 3-stage helical gearbox. The hoists come fitted with shielding rope guide along with DC Electro Magnet Disc brakes integrated as standard design. Limit switches and other electrical means is offered for overload protection. Radio Remote Control or pendant pushbuttons are used to operate the Hoist. A highly effective helical gear motor is fitted with a DC disk brakes are offered as stock for cross travel. For hoist and cross travel a Frequency invertor is offered commonly. The cross travel trolleys are intended to accommodate available sizes of monorails or standard I beams. These hoists are also suitable for fitting on under-slung cranes. All electrical modules are of reputed brand and are easily available for substitute. The key operating voltages are 3 Phase, 415 Volts and 50 HZ.

Light Weight and compact construction minimizing building loads and space saving • Suitable for Light and Medium duty workshop applications • All motors are TEFC with class F insulation • Heavy duty cast steel rope guide • Upper and Lower hook travel limit switch • Additional Counter weight operated over hoist limit switch as option • VVVF drives are available as an option • Compact and lightweight festoon cable system • Pendent and Radio remote control operation

• Safe Working Load: 250 kgs to 15,000 kgs

Hercules single girder eot cranes are easy to maintain because of the modular design of Hercules Hoists which has a modular design and makes it possible for the crane to be maintained in its installed position.We have adjustable limit switches for our cranes and hoists of reputed makes.

Mp Electric wire rope hoists are designed in modular constructions which greatly simplifies repairs & cuts downtime. The special features are low headroom, spurhelical gears running on antifriction ball bearings with lubrication, motors confirming to IS 325, “fall to safe” brakes which automatically operate in case of any power failure, tested wire rope confirming to IS 2266, forged hooks conforming to IS 3815 and push button stations operating at step down voltage of 110 V, 42 V or 24 V. Mp Hoists are designed in accordance with IS 3938. Mp hoists are compact, rugged & elegant in appearance to accommodate specific requirements, Safex hoists can also be built with micro speed arrangements (10% of normal hoisting speed),flexible trolleys to negotiate s mall radius, high speeds & high lifts, hoists suitable for steel mill duty, foundries & chemicals plants.

The normal headroom single girder configuration, is the traditional solution in single girder cranes when space under beam is not important. This configuration is suitable for 1/1 and 2/2 reevings hoists. Another relevant use is in cranes with load transfer between halls. Wheels can be flat or angled to suit different type of bottom flanges and running profiles, to improve behavior and increase duration.

Crane girders made of computer-optimised box sections End carriages of torsionally rigid, welded box-section design Improved cost-effectiveness offered by the hoist thanks to extended service life as part of the Demag standard design (2m+) Improved load handling thanks to increased lifting and cross-travel speeds Low-sway load motions thanks to infinitely variable cross-travel speeds

They are used for light to moderate service and are cost effective to use as a standby crane (Not frequently used). Total cost of single girder cranes on crane components, runway structure and building is low.

• Safe Working Load (SWL):: 1 ton to 15 tons
• Spans In Meters:: 1 m to as per customer requirements
• Heights of Lift (HOL):: 1 m to as per customer requirements
• Design standards:: Equivalent to M5, M7, M8 as per IS 3177 / IS 807

Modular Designed Wire Rope Hoist are compact in sizes & light in weight, as these hoists give optimum performances using minimum power, VFD in hoisting & Cross Travel motion gives smooth jerk less & noise free operations. Crystal can provide standard as well customized solution in modular designed single girder & monorail hoist ranging from 0.5 T to 15 T Capacity. WIRE ROPE HOIST DETAILS : Safe Working Load (SWL): 1 ton to 15 tonsSpans In Meters: 1 m to as per customer requirementsHeights of Lift (HOL): 1 m to as per customer requirementsDesign standards: Equivalent to M5, M7, M8 as per IS 3177 / IS 807  

The normal headroom single girder configuration, is the traditional solution in single girder cranes when space under beam is not important. This configuration is suitable for 1/1 and 2/2 reevings hoists. Another relevant use is in cranes with load transfer between halls. Wheels can be flat or angled to suit different type of bottom flanges and running profiles, to improve behavior and increase duration.

K2 Cranes offers electrically operated Single Girder wire rope hoists. These hoists are manufactured at K2?s modern manufacturing facility and offer customers the best in technology. Capacity for hoists range from 500 kg ? 30 tons and can be offered in single speed / dual speed design. Where space is a constraint hoist of Low Head Room type (LHR) can be offered to meet specific customer?s requirement. The hoist gear boxes are 3 stage helical gear box and the hoist motor is with IP 54 / 55 enclosures. The standard design incorporates DC Electro Magnet Disc brakes and the hoists come fitted with protective rope guide. Overload protection by means of limit switches and other electrical means is offered. Hoist can be operated through pendant push button or through radio remote control. For cross travel highly efficient helical gear motor fitted with DC disk brakes are offered as standard. Frequency invertor control for hoist and cross travel are generally offered. Besides the standard speed, faster lifting speeds can also be considered for specific customer applications. The open design for hoists component assures customers the ease of maintenance and easy accessibility to all hoist parts (refer figure above). The cross travel trolleys are so designed to accommodate available sizes of mono rails or standard I beams. These hoists are also suitable for fitting onto under-slung cranes. All electrical components are of reputed make and are easily available for replacement. The main operating voltages are 3 phase, 415 volts and 50 HZ.

We are offering single girder electric wire rope hoist. We make use of advanced technology while providing 10.0 t x 8.5 mtr single girder electric wire rope hoist. We have with us a proficient team of experts to fabricate the performance oriented range of products. Our range of electrical chain hoists is tested at every process of development to ensure for high performance, longer service life and cost-effectiveness.

• Power Source: Electric
• Capacity: 10 Ton
• Chain Length: 10 m
• Voltage: 350 V
• Country of Origin: Made in India
• Material: Mild Steel
• Frequency: 50 Hz

Single Girder Electric Wire Rope Monorail Hoist

Single Girder Monorail Hoist

Single Girder Hoist, Eot Crane Amc, heavy duty gantry cranes, Gantry Crane

Single Girder Hoist, air hoists, Rail Mounted Overhead Single Girder Crane

Single Girder Hoist, overhead trolleys, Zip Cranes, Crane Hoist

Curved Track Single Girder Hoist, Complete Crane Kit For Double Girder Crane

Single Girder Hoist, Workstation Jib Crane, Crane Winch