Single Sided Circuit Boards Dealers

• Frequency: 50Hz
• Input: DC, AC
• Color: Green
• Power Source: Electricity
• Board Type: Single Sided
• Thickness: 18-35-70 micron

• Brand Name: Customized
• Base Material: FR-4, Glass Epoxy
• Board Thickness: 1.60
• Copper Thickness: 35
• Min. Line Width: 0.35
• Country of Origin: Gandhinagar

Single Sided Printed Circuit Boards are the regular type of circuit boards that make use of substrate of non-conductive material. The Single Sided Printed Circuit Boards are covered with a layer of copper on bottom side. It diminishes the chances of short circuit, thereby providing you total safety. Single Sided Printed Circuit Boards remove the errors, thereby enabling the task of inspection better. Advantages Lower fabrication cost in mass production Provides electronic consistency from assembly to assembly Simplifies identification of components and maintenance of equipment Systematization of component wiring and assembly.

A printed circuit board, or PCB, is used to mechanically support and electrically connect electronic components using conductive pathways, or traces, etched from copper sheets laminated onto a non-conductive substrate. Alternative names are printed wiring board (PWB), and etched wiring board. We manufacture an exclusive gamut of Single Sided Printed Circuit Boards are available in various thickness and track widths. We manufacture Single Sided Printed Circuit boards that sizes from 0.4mm to 3.2 mm thickness with the thickness of the copper 18-35-70 micron as per requirement. These Single Sided Printed Circuit Boards are widely used in various electronics applications. Being Single Sided Circuit Board, it connect various electronic components electrically. We can provide customization to our range of Single Sided Printed Circuit Boards. Available In Thickness Ranging From 0.4mm to 3.2mm Thickness Of Copper 18-35-70 micron

• Brand Name: PCB
• Base Material: PCB MFG
• Color: Yellow, Green, Blue
• Power Source: Electric
• Size: Standard
• Packaging Type: Carton
• Type: Single Sided Circuit Boards
• Board Thickness: AS PER CUSTOMER REQUIRED
• Copper Thickness: AS PER CUSTOMER REQUIRED
• Country of Origin: India
• Input: ALL PCB USERS
• Min. Line Width: AS PER CUSTOMER REQUIRED

We are the supplier of this product.

Single sided circuit boards, A printed circuit board with a conductive circuit pattern one side only. Holes in the board are usually not plated through. A printed circuit board, or PCB, is used to mechanically support and electrically connect electronic components using conductive pathways, or traces, etched from copper sheets laminated onto a non-conductive substrate. Alternative names are printed wiring board (PWB), and etched wiring board. We manufacture an exclusive gamut of single sided printed circuit boards are available in various thickness and track widths. We manufacture single sided printed circuit boards that sizes from 0.4mm to 3.2mm thickness with the thickness of the copper 18-35-70 micron as per requirement.

Our company is offering a wide array of high grade Single Sided Printed Circuit Board. We are a well-renowned Manufacturer and Supplier of Single Sided Printed Circuit Board. There are several advanced features in our Single Sided Printed Circuit Board for which it is appreciated in the market. We produce a premium quality Single Sided Printed Circuit Board and deliver to our clients within the stipulated time frame. Used in : Lightning Automobile Charger CFL Color TV Electronics Specifications : Types of Laminates : FR-1, FR-2,CEM-1, CEM-3, FR 4, PTFE Laminate Thickness : 0.2mm, 0.4mm, 0.80mm, 1.00mm, 1.20mm, 1.60mm Cu Foil Thickness : 17.5 micron, 35 micron, 70 micron, 105 micron Minimum Track Width : 0.15mm (6mil) for 35 micron Cu , 0.20mm (8mil) for 70 micron Cu Minimum Spacing between the Tracks and Pads : 0.15mm(6mil) Maximum PCB Size : 610mm X 500mm Minimum Hole Size (Punching) : 0.7mm Minimum Hole Size (CNC Drilling) : 0.4mm Surface Finishing : Lacquer, Organic surface protective (OSP), HAL, (Lead free/Tin Lead), Immersion Tin Hole/Outer Profile : 100% punching & blanking, CNC Drilling & Routing Specification.

• Brand Name: PCB Circuit

We are manufacturing wide range of single sided printed circuit boards (pcb) which is used in various types of electronics sectors with mechincal support to get excellent work. We manufacture pcb as per defined company or as per the requirment of valuable clients. We use cem1,cem2,fr2,fr4 high quality of copper clad laminiates and manufacturing single sided printed circuit boards (pcb) with responsive service ,punctual,effective cost and cnc drilling. our pricing structure is different by small,medium and large quantity of manufacturing single sided printed circuit boards (pcb). features:- 1) product range :- single sided printed circuit board. double sided printed circuit board. 2)copper clad laminiates:- 35um & 70um etc. 3)copper clad laminiates grade:- cem1,cem2,fr2,fr4 etc. 4)cnc drilling. 5)minimum hole size:-0.3mm. 6)maximum no. Of layers:- 2 layers.

• Board Thickness: 1.0MM,1.5MM
• No. of Layers: SINGLE
• Min Hole Size: 0.8MM
• Masking Color: GREEN BLUE

Single Sided PCBs contain only one layer of conductive material and are best suited for low density designs. Single sided PCB’S have been around since the late 1950s and still dominate the world market in sheer piece volume. Single-sided printed circuit boards are easily designed and quickly manufactured. They serve as the most cost effective platform in the industry.

• Maximum Board Size: 600mm X 520mm
• Maximum Number Of Layer: 2 Layer (DSPTH)
• Minimum Conductor Width: 12 mils (0.3mm)
• Minimum Conductor Spacing: 12 mils (0.3mm)
• Minimum Plated Hole Size: 16 mils (0.4mm)
• Board Thickness Tloerence: 10%

A printed circuit board with a conductive circuit pattern one side only. Holes in the board are usually not plated through. A printed circuit board, or PCB, is used to mechanically support and electrically connect electronic components using conductive pathways, or traces, etched from copper sheets laminated onto a non-conductive substrate. Alternative names are printed wiring board (PWB), and etched wiring board. We manufacture an exclusive gamut of single sided printed circuit boards are available in various thickness and track widths. We manufacture single sided printed circuit boards that sizes from 0.4mm to 3.2 mm thickness with the thickness of the copper 18-35-70 micron as per requirement. These single sided printed circuit boards are widely used in various electronics applications. Being single sided circuit board, it connects various electronic components electrically. We can provide customization to our range of single sided printed circuit boards.

We manufacture a comprehensive range of Single Sided PCB available in various thickness and track widths. We can make PCB's from 0.4mm to 3.2mm thickness with the copper thickness 18-35-70 micron as per requirement. The Single Sided PCB is widely used in various electronics applications. Being single sided circuit board, it connect various electronic components electrically. We can provide customization to our range of Single Sided PCB.

A printed circuit board, or PCB, is used to mechanically support and electrically connect electronic components using conductive pathways, or traces, etched from copper sheets laminated onto a non-conductive substrate. Alternative names are printed wiring board (PWB), and etched wiring board. We manufacture an exclusive gamut of single sided printed circuit boards are available in various thickness and track widths. We manufacture single sided printed circuit boards that sizes from 0.4mm to 3.2 mm thickness with the thickness of the copper 18-35-70 micron as per requirement. These single sided printed circuit boards are widely used in various electronics applications. Being single sided circuit board, it connects various electronic components electrically. We can provide customization to our range of single sided printed circuit boards.

• Prodcution Capacity: 1,00,000 sqm/month
• Sector Catered: Consumer Electronics, Computer Periferals, Lighting, Telecom, Automobile etc.
• Types of Laminates: FR-1, FR-2,CEM-1, CEM-3, FR 4, PTFE
• Laminate Thickness: 0.2mm, 0.4mm, 0.80mm, 1.00mm, 1.20mm, 1.60mm
• Cu Foil Thickness: 17.5 micron, 35 micron, 70 micron, 105 micron
• Minimum Track Width: 0.15mm (6mil) for 35 micron Cu , 0.20mm (8mil) for 70 micron Cu

Minimum Spacing between the Tracks and Pads : 0.15mm(6mil) Maximum PCB Size : 610mm X 500mm Minimum Hole Size (Punching) : 0.7mm Minimum Hole Size (CNC Drilling) : 0.4mm Surface Finishing : Lacquer, Organic surface protective (OSP) , HAL, (Lead free/Tin Lead) ,Immersion Tin Hole/Outer Profile : 100% Punching & Blanking, CNC Drilling & Routing Specification. Standards : PC-A-600, IPC-SM-840, IPC-RB-276, IPC-TM-650. MIL 55110P, MIL P13949G

A printed circuit board with a conductive circuit pattern one side only. Holes in the board are usually not plated through.A printed circuit board, or PCB, is used to mechanically support and electrically connect electronic components using conductive pathways, or traces, etched from copper sheets laminated onto a non-conductive substrate.Alternative names are printed wiring board (PWB), and etched wiring board. We manufacture an exclusive gamut of single sided printed circuit boards are available in various thickness and track widths. We manufacture single sided printed circuit boards that sizes from 0.4mm to 3.2mm thickness with the thickness of the copper 18-35-70 micron as per requirement.These single sided printed circuit boards are widely used in various electronics applications. Being single sided circuit board, it connects various electronic components electrically. We can provide customization to our range of single sided printed circuit boards.   Single sided PCB’S have been around since the late 1950s and still dominate the world market in sheer piece volume. Single-sided printed circuit boards are easily designed and quickly manufactured. They serve as the most cost effective platform in the industry.Diya Electronics produces prototype, midrange volume Single Sided circuit boards, with a different copper thickness. High Operating temperatures range. Single sided boards are available with surface finishes including both leaded and lead-free Hot Air Solder Level (HASL).

• Thickness(mm): 0.8,1, 1.2, 1.6, 2.4 ,3.2

Single sided circuit boards Mask Color : Green, Black Legend Print Color : White ,Yellow Surface Finish : Immersion Tin, HASL ,Immersion Gold Cutting : Routing, V-groove, Glass Epoxy, Paper Phenolic Grade :FR2, FR4, CEM1.

• Frequency: 50Hz
• Board Thickness: 2.2 Mm
• Input: AC
• No. of Layers: 3
• Masking Color: Green
• Material: FRP
• Min Hole Size: 0.15 mm
• Current Type: AC

single sided printed circuit board manufactured by us finds wide usage in several sectors. Known for optimum designing efficiency, the single sided pcb is made by us in accordance with the set industrial standards. Leveraging on strong infrastructure and access to latest technologies, we can offer single sided printed circuit boards in bulk as per the requirements of the clients. Single sided printed circuit boards offered by us are tested stringently under expert supervision. production capacity -: 1,00,000 sqm/month demanded in sectors such as : consumer electronicscomputer peripheralslightingtelecomautomobile

• Size: Standard
• Color: Green
• Frequency: 50Hz
• Power Source: Electric
• Input: AC, DC
• Base Material: Plastic
• Price: Rs. 0.25 PS/SQCM