Slew Drive Dealers

The slew drive comes in two types: single row ball and double row ball. These are selected depending on the load coming on the drive. Higher loads generally need double row slew bearing. The drives come with an IP65 rated protection system, which protects the drive from environmental conditions as well as dirt, sand, dust and even water. The drive is designed in such a way that huge loads can be carried in spite of the compact form factor. The gears used in the assembly are hardened and ground, so that they provide maximum durability and longer life.

• Reduction Ratio: 12:1 to 1400:1
• Torque Capacity: 500-30000 Nm
• Power Rating: 0.18-150 KW

These drives are required for mobile equipments such as Excavators, Cranes, Drilling Rigs etc. Slew drives work with simple planetary principleand are flange mounted with integral or separable pinions according to customer requirements and hydraulic brake.

• Material: SS
• Brand: Signet
• Weight: 12 kg
• Packing Type: Corrugated Box
• Modal No: SE3
• Rated Output Torque: 0.4 kN.m
• Tilting Moment Torque: 1.1 kN.m
• Axial Load: 30 kN
• Radial Load: 16.6 kN
• Holding Torque: 2 kN.m
• Gear Ratio: 62:1
• Tracking Precision: Less then 0.200
• Self-locking Gears: Yes

Slew drive is an advanced version of the conventional worm and worm wheel technology. This assembly incorporates a worm shaft along with a slew ring bearing which give almost friction less working. Such types of slew drive are perfect for applications that require both load holding and rotational torque from the same gear box. The drives come with an hourglass worm technology, which increase the efficiency of the drives. The difference between normal and hourglass technology is that, in a conventional worm gearing system, only one tooth of the gear is in contact with the worm shaft, whereas in our systems, it can go up to 6 gears in contact. These are sealed and compact drives Incorporate maximum load rating with compact design Depending on the design, come in single or double row ball Worm gear used is hardened and ground for maximum efficiency and long life Various ratios available Minimal maintenance cost Easy assembly Self locking arrangement available  Applications where Kavitsu Slew Drive are used: Solar Trackers Wind Turbines Man Lifts Hydraulic Machinery Telescopic Handlers Digger Derricks Lifts Cranes Drilling equipment Military Equipment Turn tables Truck mounted cranes

This standard range covers from 3.000 nm to 160.000 nm nominal torque, however special solutions are available for torque values up to 2.000.000 nm. The gearboxes have a compact design and a strong output support suitable for applications with high radial loads. each model can be supplied with pinion shaft or male shafts (splined or cylindrical). Amongst the many accessories available static brakes can be fitted in a low opening pressure version (suitable for closed loop circuit) or in a dry version (suitable for high speed motor). Some models have the abs type approval for azimuth thruster applications however design approval is available on demand with all other major classification societies.

Advantages Slewing drive designed with hourglass worm shaft which provides more tooth contact and higher torque. Service life is increased by gear and raceway harden. Product performance is tested and ensured product quality. H-fang is capable of customized solution Types: SE,PE,ZE,S,HSE and SE-2 ISO9001 & CE

PGI Drives is today recognized as a prime supplier, as well as a strategic partner by customers, due to the high quality and efficient services it provides. Customer requirements example are: Winch drives. Compact drives. Track drives. Slew drives. Concrete mixer drives. Special drives. Brakes. Harvester drives.

Slew Drive manufactured by us is designed specifically as per the need of the client. Our Slew Drive is widely appreciated because of its ability to serve the purpose in various environmental conditions. We offer Slew Drive at affordable market price. Features : Compact structureHigh efficiencyIncreases productivity of slewing machinesSimple mountingOperating reliabilityVersatilityWorks on planetary principleHydraulic brakeLong performing lifeWide transmission ratio rangeBrake and gearing has same lubrication but independent motor Optimized torque performance capacityRadial load capacityPerfect meshing between pinion and gear Application Areas : Electric motorHydraulic motor

Elecon slewing gear units of planetary as well as bevel-helical type (conventional) are available in various sizes ranging from 1.5 kW and reduction ratio ranging from 400 to 1000. These gear units are especially designed for the slewing mechanism of the stacker-reclaimer machines. The planetary gear units normally have four-stage reductions out of which the first stage is designed as helical or bevel pair, and the remaining stages according to planetary gear systems. The conventional gear unit consists of five to six reduction stages comprising bevel and helical gear pairs. The sun and planet gears are case-hardened and ground to quality 6 as per DIN 3961/63. The annulus is made up of high tensile alloy steel, heat treated or nitrated depending upon power requirement. The spiral bevel gears in case of conventional gear units are case-hardened and lapped in pair so as to ensure optimum tooth contact pattern during assembly. The casing is of welded construction mainly in three parts in case of planetary gear unit and in two parts in case of conventional gear unit. The bearing bores are machined with high degree of accuracy on CNC machines.

The range of slewing drives offered by Top gear are being widely used in various applications like a drilling rigs, cranes, wind mill, stackers, loaders, excavators, where the application demands rotation of equipment @ 360 degree. The constructional feature of slew drive has got sturdy roller bearings to take care of the radial & axial loads on output shafts. The pinion gear which meshes with the slew ring have positive corrections to take care the proper meshing & life of slewing ring.

Elecon slewing gear units of planetary as well as bevel-helical type (conventional) are available in various sizes ranging from 1.5 kW and reduction ratio ranging from 400 to 1000. These gear units are especially designed for the slewing mechanism of the stacker-reclaimer machines. The planetary gear units normally have four-stage reductions out of which the first stage is designed as helical or bevel pair, and the remaining stages according to planetary gear systems. The conventional gear unit consists of five to six reduction stages comprising bevel and helical gear pairs. The sun and planet gears are case-hardened and ground to quality 6 as per DIN 396163. The annulus is made up of high tensile alloy steel, heat treated or nitrated depending upon power requirement. The spiral bevel gears in case of conventional gear units are case-hardened and lapped in pair so as to ensure optimum tooth contact pattern during assembly. The casing is of welded construction mainly in three parts in case of planetary gear unit and in two parts in case of conventional gear unit. The bearing bores are machined with high degree of accuracy on CNC machines.

• Power: 0.5 HP to 50 HP
• Capacity: 40 Kgm to 3000 Kgm

These type of gearboxes are required for cranes, drilling rigs, excavators etc. Slew drive work with simple planetary principle. These drives are flange mounted with integral or separable pinion as per customer requirement. Input can be electric or hydraulic as per customer requirement.

We are one of the renowned Hydrostatic Slewing Drive Suppliers in India. Our Slewing Drives are widely popular for high duty cycles by several Industrial Machinery Manufacturers. The Reduction Ratio of our Slewing Gear Drives is 15: 1 to 1500: 1. Their Input Power varies from 0.5 HP to 50 HP with Torque Capacity of 40 Kg to 3000 Kg. These drives are used in Cranes, Excavators, Rig drilling etc. Slew Drive Reduction ratio – 3 : 1 to 10000 :1 Input power – 0.2 Kw to 30 kw Torque Rating - 10 Kgm to 10000 Kgm

• Mounting: Horizontal
• Material: Mild Steel
• Power(HP): 2hp
• Gear Type: Planetary

The planetary gear units normally have four-stage reductions out of which the first stage is designed as helical or bevel pair, and the remaining stages according to planetary gear systems.

• Mounting: Flange mounting
• Ratio: 3.26 onwards
• Torque: 3000Kgm
• Input Power: Suitable for hydraulic motor & electric motor
• Output shaft: Spline shaft with pinion

With compact structure and strong power, Slew Drives are applicable in construction engineering such as mobile cranes, reach stackers, mine crushers and many more  Solid shaft with key

• ratings: 1,500 to 15,000 Nm.

Worm Drive Slewing Rings Worm drive slewing ring is a compact unit, which consists of a slewing ring worm gear, worm drive and housing. The worm drive slewing rings provide an economical and compact solution with low maintenance costs. The unit offers high output torque with radial and axial load carrying capacity suitable for slow rotation with continuous or cyclical movements.

We offer highly efficient Slew Drive that is manufactured using superior grade raw materials. The slew drive offered by us is flange mounted designed with integral or separable pinion. These drives are duly tested under the supervision. We are recognized as one of the topmost manufacturers and exporters in india. working principle working principle attributes efficient working can be electric or hydraulic can be availed in different specifications defect free uses used in cranes, excavators, drilling rigs etc.