Slitting Line Dealers

• Automation Grade: Semi- Automatic
• Phase: Three Phase
• Brand: KS
• Usage/Application: Industrial
• Frequency: 50/60 Hz
• Voltage: 220-415 V

• Brand Name: FEW/SL/03
• Material: MS/SS/COPPER-BRASS
• Power Consumption: 10-300 HP
• Thickness Range: 0.3 to 20.0 mm
• Loading Weight: Up to 35 tons
• Width Range: 300 to 2500 mm

Slitting Line functions as a constant speed type. Firstly, the coil is loaded on the coil car by E.O.T. crane and brought to the uncoiler by operating the coil car. Coil car centralizes the coil with the uncoiler mandrel and the coil is mounted on the uncoiler which results in the expansion of Mandrel. The Snubber roll rotates the coil. Peeler breaks the straps and brings the pre end upto Pinch roll. The Pinch roll drives the coil end upto the slitter. Then its drive is disconnected. Slitter moves the Slitted Strips further. Slitted Lines are threaded through loop table and drag tensioner into the recoiler drum. Recoiler winds one turn on loose coil. Then drag tensioner and loop are put into operation. Slitter and recoiler run simultaneously in synchronization. As the coil build up, the recoiler RPM correspondingly goes down to keep desired constant line speed. This process goes on until the end of coil on uncoiler. The Slitted coil is pushed on the exit coil car trolley through a pusher plate operated by hydraulic cylinder. The side Slitted Scrap is wound on the scrap winder units provided on both sides of the slitter. Features High quality of metal usedCorrosion resistantAccurate working

• Material: MS
• Quality: Optimum Quality
• Production Capacity: 300 Ton/Day
• Coil Width: 200 to 2500 Mm
• Coil Thickness: Upto 20 Mm
• Coil Weight: upto 35 Tons
• Speed: 20 to 160 Meter per Minute

• Features: Timely execution , Reliability , High flexibility , Efficient performance

At DOSHI STEEL GROUP one of our divisions renders Slitting process services for steel customers who require material as per their required sizes. All ferrous and nonferrous metal can be slitted into strip coil with the help of our precision slitting lines/ process. Strip Coil is slitted as per tolerance given by the customer. ID and OD of the strip coil is adjusted as per customer's requirement Our Slitting lines/ Process are capable of slitting coils with following specifications:- Material - CR / GP / SS / HR / NO / GO / AL Width - 3.2mm to 450mm Thickness - 0.10mm to 2.50mm ID/ OD of the Coil - As per customer’s requirement

• CAPACITY - WIDTH: 1000mm TO 3000mm
• CAPACITY -THICKNESS: 1mm TO 10mm

'ANASUYA' - offers a broad range of Coil Processing Machine lines, Let it be; Slitting Line Our, De-coiler, coil loading car, levelerstraightner, shear, feeder, slitter, & folding machines can be integrated into any type of press feed systems, coil preparation lines for roll forming line, slitting line, Robotic welding line and cut-to-length line. These can also be incorporated in any of the running Coil processing lines. Selection range is extensive according sheet width, thickness and material quality

We are among the trusted names, involved in offering world-class lot of Slitting Line Machine in the national market. We are highly concerned towards providing the top-notch array of products to the buyers and thus, check the lot at different levels for quality assurance. The offered Slitting Line is available in various stainless steel coil thicknesses ranging from .4mm to 4mm.

DeeTee offers a complete range of Slitting Line Tooling confirming to international standards - Rotary Metal Slitting knives, Metal Spacers, Rubber bonded spacers, stripper rings, Over arm Separator Discs , shims and other precision tools.Heat treated in salt bath furnaces, DeeTee’s slitting line tooling has the highest degree of hardness uniformity and the ideal metallurgical properties to slit any metal.  DeeTee manufactures slitting line tooling in Standard and Extra Precision tolerance grades with  lapping. Standard for slitting strips above 1mm thickness and Extra precision grade for foils up to .2mm thickness.DeeTee can manufacture Slitting Line tooling up to 600mm diameter.   SLITTING LINE TOOLING COMPRISES OF SLITTING KNIVES /  SLITTING CUTTERS / CRCULAR KNIVES      METAL SPACERS      RUBBER BONDED SPACERS    LOOSE RUBBER RINGS   SHIMS          SPACERS & SEPARATOR DISC FOR OVER ARM SEPARATORS   Rotary slitting knives are manufactured from the finest imported alloy steels. The knives are made from – AISI D2    SKD 11   1.2379 AISI D3 SKD 1 1.2080 AISI H13 SKD 61 1.2344/45 AISI S1   1.2550 AISI M2 SKH51 1.3343  SPECIAL 8% Cr High alloy tool steels and POWDER METALLURGICAL grades like ASP2023 are used for special applicationsSpacers are made of en31 / SUJ2 / 100Cr6 / SAE52100.    Rigid inspection at every stage ensures top Quality.   Keywords : slitting line tooling, slitting line tooling components, metal sliting tooling, Metal Slitter,Metal spacer,rubber coated spacers, shims,strip rings,metal rings,rubber spacers,metal washers,stripper rings, separator disc,overarm separator,slitting tools,rotary cutting knives,flat cutting knives,rotary shear knife

Our manufacturing unit provides a wide range of options and heads are available from 3" to 10" diameter arbours with standard or precision tolerances. Along with integrated multi staged gear boxes, powered out board housing, stationary or removable heads, entry tables, exit pinch rolls, integral scrap winders and re-winders. We offer Fully Automatic and Semi Automatic utility. The Lines are custom designed on the basis of material specification and required production capacity.High outputthroughput and flow rates by rigorous minimization of tooling times and high production speeds.High winding accuracy with increasing coil diameter by means of the movable braking unit for operation mainly without separating system at the coiler.

• Brand Name: S.E.W.
• Material: Mild Steel
• Width: 1200mm
• Machine Speed: 100 mtr/min
• Automation Grade: Automatic
• Coil Thickness: 0.5mm to 3mm.
• Coil Weight: 10 Ton
• Body Material: Mild Steel
• Phase Type: Three Phase

Our regular production program for slitting lines includes specially designed lines for • Cold Rolled Coils • Hot Rolled Coils • Aluminium Coils • CRGO CRNGO Coils • Stainless Steel Coils. We design equipment considering customer's production volume. Coil Loading devices like coil saddles, coil car, Un-Loading devices like turn stile, exit coil car, coil threading unit (Snubber Roll, Peeler Table), Quick Change Cutter Head, Deburring Unit, Tensioner Devices, Slitted Coil Packing Str-aping Devices are key features of DIVINE Slitting Line. In this way DIVINE offers right choice Slitting Line considering specific needs of customer.

Our company is highly esteemed in offering Slitting Line to the clients. Slitting Line is made as per the set industry norms and guidelines, utilizing the finest raw material and modern machines. Offered range is widely demanded for low maintenance. This product is stringently tested by quality analyzers on various parameters to make sure flawlessness and defect free delivery. Features : High tensile strength Dimensional accuracy Corrosion resistance

Rollcon Engg. Co. designs and manufactures slitting lines for Hot Rolled and Cold Rolled ferrous strips as well as non-ferrous strips. Rollcon Engg. Co. has a reference of many slitting lines, built over years. The capacity of these lines ranges from 300mm to 2000mm (width) and 0.10mm to 10.0mm (thickness) in strips . Rollcon Engg. Co. offers slitting lines of different designs to exactly suit the customer's requirements of production capacity, high quality of slit product, automation level, flexibility of operations and budget. The slitting lines can incorporate latest technical innovations such as using rapid change system for Slitter Heads. Rollcon Engg. Co. slitting lines produce superior quality of the slit coils with significantly higher levels of productivity. This goes a long way in achieving customer satisfaction Some of the important features of Rollcon Engg. Co Slitting Lines are : Automation : Rollcon Engg. Co. can engineer slitting lines to any automation levels required by customers, including computerised diagnosis, production control systems, management information and control systems etc. Edge-Trimming : Rollcon Engg. Co. also manufactures edge-trimmers. The edge-trimmer heads can be injecta-mounted, inter-changeable with the slitter heads or can be built into dedicated edge-trimming lines. Such dedicated lines are manufactured upto a speed of 300 mpm. Recoiler Drums : Rollcon Engg. Co. has a wide range of recoiler drum designs to suit the application, strip thickness and material. Expanded leaf type for thick strips (1.20mm and thicker), Concentric collapse six segments three wedges for thin strips(0.30 to 1.20mm) and Concentric positive collapse six segments six wedges for very thin strips(0.30mm and thinner) are most suited. Replacable recoiler drums with very low changeover time is one of Rollcon Engg. Co's special design features.

Slitting line can do uncoiling, slitting and recoiling works, make coil steel to any needed width coil steel. It mainly includes coil car, uncoiler, shearer, correct device, slitting machine, scrap recoiler, tension unit, press unit, recoiler and coil car, hydraulic system, ect. It mainly used in coil or hot rolling carbon steel, silicon steel and all the other kinds of metal materials with surface spreading.

Newcore Global Pvt. Ltd Equipment offers slitting lines of different designs to exactly suit the customer’s requirements of production capacity, high quality of slit product, automation level, flexibility of operations and budget. The slitting line machine can incorporate latest technical innovations for Slitter Heads. Specifications of Slitting Line:  1)The materials processed in Slitting lines are: Carbon Steel Stainless Steel Aluminum Copper and brass 2)Width: coil width ranges from 100mm to 2000mm; strip width up to 80mm 3)Coil Thickness: 0.2mm-12mm 4)Coil Weight: up to 30MT 5)Coil ID: 508mm-820mm 6)Coil OD: up to 2000mm 7)Line Speed: up to 150m/min 8)Operation System: PLC automatic control system 9)Standard Power: 380V50HZ 10)Applications: for slitting strips of carbon steel, stainless steel, aluminum, copper and brass. Components of Slitting Line:  1) Coil car 2) Shear 3) Loop table 4) Uncoiler 5) Side guide 6) Tension station 7) Hold down roll 8) Slitter 9) Separator 10) Leveler 11) Scrap winders 12) Recoiler

We are a reputed manufacturer, exporter and supplier of Slitting Line Machine. These products are precisely designed utilizing premium quality raw material, procured from reliable vendors of the market and using latest technology. The offered range is tested on welldefined parameters of quality in order to offer flawlessness range of products at the clients' end.

This line can be adjusted to do recoiling or dividing work to meet customers demands.PLC system is used to select the information from every part of the line, centrally controlled. There also has speed self adjusted and keep memory after lost power supply function. So the line has efficient performance.

• Automation Grade: Automatic
• Thickness: 0.3mm to 1mm.
• Capacity: 700mm Width
• Brand Name: S.E.W.
• Material: Mild Steel
• Weight: Coil Weight 5 Ton
• Phase: Three
• Driven Type: Electric Motor
• I Deal In: New Only

• Brand Name: PRAGMACON
• Material: CR/SS/AL
• Country of Origin: Made in India
• Cutting Material: AL/CR/SS
• Production Capacity: 60METER/PER MIN
• Automation Grade: Semi- Automatic
• Power Source: AC 440V

We manufacture and export slitting lines that are designed to slit all types of thin gauge strips to extremely close tolerances. These lines basically consist of coil handling, strip processing and scrap management equipment.   Features   Types - Singe loop and double loop Thickness of 0.1mm to 6 mm Strip widths - 200mm to 2000mm Coil weight - 1 tonne to 30 tonnes Characteristics of Our Slitting Lines Automatic Strip Threading Minimum Burr on strip High running accuracy of knife at arbours Constant parallel distance between the last Deflector roll and recoiler drum Straight edged recoiling Capacity to run upto 100mts/min Economic efficency due to high automation level

• Thickness: 0.3-2.0mm
• Width: <1520mm
• Device name:: Straightening, Slitting And Cutting Line
• Equipment profile: length X width X
• Height: 2mX1.6mX1.2m
• Main motor power: 11kw
• Hydraulic power: 3 kw
• Equipment configuration: straightener -slitter-hydraulic cutter-computer controlling system-hydraulic station

UTech Rolls Equipments Pvt. Ltd.manufactured a quality equipment with a rare combination of strength and accuracy. This highly efficient machine enables slitting of CR/HR coils in loop control/speed assisted/pull through mode as per requirement. Complete line is PLC controlled, thus all hydraulic operations can be performed from the desk most conveniently. Electrical drives consist of DC motors that enable smooth operation in all three modes. The use of eccentric adjustment mechanism employed on slitter housing (in place of the worm screw type) ensures a high level of slitting accuracy. All wear parts, Sourced from international suppliers with best technology and repute are self-lubricated types and provide longer life and maintenance free operation. The uncoiler can accommodate all types of standard coil bores on expandable opposed drums for heavy load and damage free operation. Coil cars are provided on both sides for trouble free remote handling of input and outputs coils. Scrap winders are driven by hydraulic motors for automatic speed and load control operation. Features   300 mm to 2000 mm width 0.2 mm to 10.0 mm thickness 5 MT to 40 MT coil wt. 508, 610, 760, 850 mm input coil bore 508/610 mm output coil bore 1200 mm to 2000 mm coil OD 0.05 mm slitter width accuracy Eccentric type slitter Cassette type slitter for faster tool change Outboard support for recoiler Triple bellow type drag tensioner

DeeTee offers a complete range of Slitting Line Tooling confirming to international standards - Rotary Metal Slitting knives, Metal Spacers, Rubber bonded spacers, stripper rings, Over arm Separator Discs , shims and other precision tools. Heat treated in salt bath furnaces, DeeTee’s slitting line tooling has the highest degree of hardness uniformity and the ideal metallurgical properties to slit any metal. DeeTee manufactures slitting line tooling in Standard and Extra Precision tolerance grades with lapping. Standard for slitting strips above 1mm thickness and Extra precision grade for foils up to .2mm thickness. DeeTee can manufacture Slitting Line tooling up to 600mm diameter.

The machine is specially design to slit the required width of steel strip. We supply the Slitting Line of capacity ranging from 5 MT to 30MT. Its main purpose is to increase the output speed, upgrade the quality with easy operation, labor saving, high safety to reach the demand for high-performance.