Slot Wedge Dealers

• Density: 1.98-2.0g/cm3
• Tensile Strength: 400Mpa
• Rated Voltage: 40KV
• Heat Stability: 130 degree celsius
• Water Absorption: 4 Mg
• Comparative Tracking Index: CTI 575
• Dielectric Constant: 4.9 IMHz
• Features: Coming with excellent physical characteristics. Provides for flame-proof, damp-proof usage. Comprises composite of polyimide film and alkali-free woven glass fabric for superior heat-resistance.

• Application: Industrial

We are a leading Manufacturer of Fiberglass Slot Wedge from Kolkata, India.

• Material: Epoxy
• Brand Name: Hindustan Engineers
• Power: 30KV
• Usage/Application: Electrical Fitting
• Size: 1 sqft x 1 sqft x 1mm

• Material Type: Epoxy
• Usage/Application: For Motor
• Motor Part Type: Cover or Frame
• Type Of Motor: AC Motor
• Thickness: 0.5 - 4 mm

• Material Type: Fiberglass
• Application: For Industrial Use
• Country of Origin: Made in India
• Tensile Strength: 340 Mpa
• Max Withstanding Temperature: 150 Degree C
• Motor Part Type: Rotor
• Color: Yellow and Green

Vee shaped Slots : Produces jetting effect to inject recharge water into the aquifer.1) More than 1 times effective open area : Compared to any slotted pipes) gives maximum recharge rate at minimum frictional head loss which also reduces incrustation rate. 2) Efficient and non-clogging screen assembly : Effectively filters out maximum suspended solids from raw water with non-clogging slots for sustained recharge rate.

• Thickness: 10 mm
• Color: Green
• Tensile Strength: 42000 PSI
• Material: Glass Epoxy
• Usage/Application: Electrical Appliances
• Temperature: 180 Degree C

• Application: Industrial
• feature: good quality
• Condition: New

• Material Type: Fiberglass
• Thickness: 8 mm
• Tensile Strength: 200 Mpa
• Max Withstanding Temperature: 50 Degree C
• Length: 2 ft

• Water Absorption: Less Than 0.05 %
• Bending Strength: Greater Than 340 Mpa
• Temperature: 150 Deg C
• Density: Greater Than 1.7 g/m cubic

• Material Type: Fiber Glass
• Usage/Application: Industrial
• Phase: Single Phase
• Motor Part Type: Cover or Frame
• Power: 200W
• Type Of Motor: DC Motor

• Brand Name: Sonu
• Material: Glass
• Thickness: 0.3mm-25mm
• Color: Green

Insulation Resistance and Polarization IndexThe insulation resistance is the quotient of applied voltage across the insulation divided by total resultant current at a given time.Insulation Resistance and Polarization Index of stator winding are measured using a 5 Kv Tera ohm Megger with a constant output of 5000 V DC. IR & PI measurements are taken between each phase and earth while the other two phases are shorted & grounded.

As shown in figure- FRP Wedges are to be place inside of Slots of Electric motor known as traction motor. Copper wires are wound in side Slots of motor & FRP Wedges are to be place over it because of electrical insulation properties.

Fiber Glass Slot Wedges, Hotel Line Turbo Grind Commercial Mixer Grinder

magnetic slot wedge, Glass epoxy g10 sheet, Epoxy fr4 sheet

Fiberglass Slot Wedges

Slot Wedge, Motor Encoder, Gear Head Motor, Face Mounted Motor