Smoke Alarms Dealers

• Material: M S Body
• Color: Red
• Installation Service: Yes
• System Components: Smoke Detectors
• Sensitivity: -112dbM
• Relative humidity: 5%
• Standby current: 100mA
• Working power: 12V&1.5A

With the assistance of our streamlined packing system, we are able to meet the customized and standard packing requirements of the clients. Moreover, clients can stay rest assured for the safety of the products from our end. The wide assortments of products we offer are strictly as per the globally accepted norms.

Our DIL Switch Addressed (DSA) Context Plus optical detector has a moulded self extinguishing white polycarbonate case designed to allow free entry of smoke while minimising the effects of dust contamination. Stainless steel wiper contacts connect the detector to the terminals in the mounting base. Within the case is a printed circuit board,The other side has the address capture, signal processing and communications electronics. An infra-red light emitting diode (IR LED) within the optical chamber is arranged at an obtuse angle to a photodiode. The photo-diode has an integral daylight-blocking filter. The IR LED emits a burst of collimated light every second.

• Color: White
• System Components: Fire Alarm Control Panel
• Usage/Application: Residential,Office,Industrial
• Body Material: Plastic
• Automation Grade: Automatic

• Type: Smoke Detectors
• Brand Name: Google Nest
• Material: Plastic
• Application: Smoke Detecting
• Weight: 100gm
• Color: Oak White
• Feature: Durable
• Condition: New
• Automatic Grade: Automatic
• Power Source: Electric
• Warranty: 2yrs
• Certification: CE Certified, ISO 9001:2008
• Country of Origin: India
• Mounting Type: Wall Mounting

Our prime concern is to fulfill variegated requirements of the clients, all the time. And, to achieve this objective, we have installed a capacious warehouse. We are bangalore(india) based organization, affianced in making available the finest lot of products in the market.

• Material: ABS Plastic
• Color: White
• Application: Office Buildings, Residential Buildings, Industrial Premises
• Automation Grade: Automatic
• Wireless: Yes

• Type: Fully Automatic
• Color: White
• System Components: Smoke Detectors
• Body Material: Plastic
• Automation Grade: Automatic
• Audible Alarm: Yes

• Type: Smoke Detectors
• Material: ABS
• Weight: 100gm, 150gm, 200gm
• Color: Grey, Oak White
• Application: Smoke Detecting
• Automatic Grade: Automatic
• Power Source: Electric
• Feature: Durable, Easy To Install

Microcontroller Based Smoke And Fire Detector Cum Alarm is used to detect Fire and Smoke and give alarm when either of them occurs. This circuit is often used in Industries to detect fire and smoke that may occur at the site of hazardous processes (AT89C51). We have used ATMEL 89C51 microcontroller which has 4 Kbytes of programmable memory.   The AT89C51 provides the following standard features : 4K bytes of Flash, 128 bytes of RAM, 32 I/O lines, two 16-bit timer/counters, five vector two-level interrupt architecture, a full duplex serial port, and on-chip oscillator and clock circuitry.   Pin Description VCC Supply voltage (GND Ground). Port 0 Port 0 is an 8-bit open drain bidirectional I/O port. As an output port each pin can sink eight TTL inputs. When 1s are written to port 0 pins, the pins can be used as high-impedance inputs. Port 0 may also be configured to be the multiplexed low-order address/data bus during accesses to external program and data memory. In this mode P0 has internal pull-ups. Port 0 also receives the code bytes during Flash programming, and outputs the code bytes during program verification. External pull-ups are required during program verification.   Working of the circuit : We have interfaced the LCD to the port 0 and 2. The data is sent on P0 while the control signals for the LCD move on Port 2 pin 0, 1, and 2.   The detail functions of each of the pins are as shown below : Pin no. 18 and 19 are connected to the crystal. The function of crystal is to give pulses to the microcontroller which allows the microcontroller to do various calculations. Pin no. 9 of the microcontroller is connected to +5v through a capacitor of 10uF/50v. This causes the microcontroller to reset at Power ON and to begin execution of program from the first line. (P2.4), (P2.5) are connected to switches S1 and S2 while the other end of switches are connected to Ground. So when a button is pressed the port pins P2.4 and P2.5 get a low depending on which button is pressed and the software inside the microcontroller can take appropriate action. IC 7805 is a voltage regulator IC. It is connected in the input voltage line and limits the voltage to +5v to the circuit. Even if the input voltage goes high up to 14 volts, this IC gives only +5v to the circuit thus preventing any damage. Port 1.0 is connected to the Smoke Circuit and Port 1.1 is connected to fire circuit. The microcontroller receives the logic signal from the smoke / fire circuit when the Smoke or Fire is detected. This logic signal is read by the software and indication is given on Channel 1 or Channel 2. We have used a Hooter on Port 3.0 through a relay which is also activated on detection of smoke / fire. Two keys SW1 and SW2 are connected to the microcontroller port 2.4 and 2.5. These are used to stop the hooter (relay on Port 3.0) for smoke and fire respectively. The LCD will display ‘Channel 1 alarm activated’ when Smoke is detected and ‘Channel 2 alarm activated’ when Fire is detected. In normal case of operation the LCD will display ‘Normal Operation’. The software is written in C language.

• Automation Grade: Automatic
• Alarm Indication: Yes
• Led Indication: Yes
• Usage: Office Buildings, Residential Buildings, Industrial Premises
• Proof: CE Certified
• Voltage: 220 - 380 V
• Features: Using low-power CMOS microprocessor, Special moisture-proof design, Pest control, dust-proof anti outside light interference

• Power:: 9V battery operated
• Sensor:: Photoelectric sensor
• Size: Mini size
• Certificates: CE, EN14604
• Display:: Two-Tone LED light indicator
• Indicator: Low battery warning
• Installation: Celling or Wall mounted

We are offering smoke detector fire alarm. Photoelectric smoke detector el-s01, properly installed and maintained. Residential smoke alarms, are one of the best and least expensive ways to provide an early warning when a fire begins. Smoke alarms save lives, prevent injuries and minimize property damage by alerting resident early to a fire hazard. specifications 9v battery operated photoelectric sensor display:two-tone led light indicator mini size low battery warning features ce, en14604 certificate mini size smoke detector photoelectric sensor 9v battery operated low battery warnning indicator two tone led light display, flash alarm indicator (red led) , power indicator (blue led) auto test button for easy recommended monthly testing ceiling or wall mounted suitable for any rooms loud 85db alarm signal parameter power: 9v dc battery alarm model: sound&flash alarm sensor: photoelectric sensor operating current(normal) 10ua alarm style: in comply with ul217 & bs5446:part 1 2000 operating current(alarm working) 20-50ma temperature: -10c+50c alarm decibel ≥85db1m humidity: 5%-95% dimension: 110mm*25mm

• Color: White
• Power Source: Electric
• Material: ABS Plstic
• Usage/Application: Office Buildings
• Automation Grade: Automatic
• Frequency (Hz): 50 to 60Hz
• Voltage (V): 110 V
• Alarm Noise (dB): 50

Smoke alarm Advanced detection and discrimination algorithms, Easy installation and maintenance, SMD circuit board design: Satisfactory quality and reliability guaranteed, Integrated heat detector for SD119-2H and SD119-4H models.

• Automation Grade: Automatic
• Usage/Application: School, College,Hotel and Restaurants
• Shape: Cylindrical
• Tft Display: No
• Audible Alarm: Yes

• Weight: 222 gm
• Features: Utilizes the photoelectric technology in the best possible manner, Could easily detect smoke, Long lasting performance .
• Height: 15 cm
• Width: 14 cm
• Depth: 44 cm
• Colour: White

The Photoelectric Smoke detector manufactured by us is best suited for detecting optical dense smoke, which involves fire materials like- soft furnishing, plastic, foam or any other such material that produce a large and visible smoke particles. This uniquely designed device helps in preventing false fire alarms with its fast responsive flaming fires or smoldering fire.

• Power Source: Electric
• Color: White
• Application: Office and Commercial areas

• Coverage Area: 20 Sq.M
• Working Temperature: -10
• Working Humidity :: : % RH

Smoke alarms that are properly installed & maintained, play a vital role in reducing fire deaths and injuries. Smoke alarms save lives. If there is a fire in your home, smoke spreads fast and you need smoke alarms to give you time to get out. Having a working smoke alarm cuts the chances of dying in a reported fire in half. Almost two-thirds of home fire deaths resulted from fires in homes with no smoke alarms or no working smoke alarms.

Smoke Alarm, Gel Heel Cups, Gel Heel Cushions, fire nozzles, Cable Lugs

Smoke Alarm, digital fire alarm, X Ray Baggage Scanner