Smoke Density Test Apparatus Dealers

• Voltage: Single Phase / 220V /AC
• Features: Easy operations, Low maintenance, Long functional life
• Frequency: 50 Hz
• Sample Stand: 25 x 25 x 4 mm
• Chamber Size: 300 mm x 300 mm x 790 mm
• Burner: 40 psi Gas Pressure
• Power Source: 5-7 V / DC
• Light Source: 6 V DC Bulb
• Power Requirement: Less than 1 KW
• Brand: Maxwell

• Application: Density Testing
• Voltage: 220V
• Type: Smoke Density Test Apparatus
• Country of Origin: India

Smoke Density Test APparatus for FRLS Cables and Cable Compound

• Material: Metal
• Application: Density Testing
• Power: 12V
• Warranty: 1yrs
• Model: GWL956
• Pack Type: Carton Box

For demonstrating Brownian motion. Designed for use with a microscope. A short cylindrical cell, closed by a cover glass, is held vertically in an opaque channel 90 x 90 x 30 mm. Illumination is by an integral filament bulb & cylindrical glass lens. The cell enables Brownian motion to be observed for at least 15 minutes after charging the cell with smoke. Fitted with 4 mm socket terminals for connection with 12V supply. With instructions.   

• Size: 750±5 mm x 750±5 mm x 1000±5 mm.

The laboratory test instrument determines the corrosion to visibility due to smoke, according to UIC code 564-2. The test equipment is prepared with solid state imported sensors to analyze the fall in visibility due to smoke. The machine comprises of completely digital display that ensures accurate and error-free readings along with internal calibration facility. The machine comprises of wiring which is fabricated as per CE standards to ensure easy and safe maintenance. The test procedure is projected to establish the erosion of visibility due to smoke produced when the specimen burns in a given sealed compartment by assessing the gradual loss of a light beam passing through the chamber.

We have smoke density test apparatus available with us in competitive range. The smoke density test apparatus manufactured and supplied by us is made in accordance with the international standards. The smoke density test apparatus is used to measure the smoke density from burning or decomposition of plastics. Smoke density test apparatus ensures high safety and quality of electro- technical products. smoke density test apparatus is used to check electrical home appliancesindustrials luminariesmotorselectrical wiring accessories.

This test method describes the measuring and observing the relative amounts of smoke obscuration produced by the burning or decomposition of plastics. It is intended to be used for measuring the smoke producing characteristics of plastics under controlled conditions of combustion or decomposition. The measurements are made interns of the loss of light transmission through a collected volume of smoke produced under controlled, standardized conditions.

The apparatus is designed to measure the smoke density from the burning or decomposition of plastics as per the requirement of the ASTM D 2843 standard. The apparatus consists of smoke chamber and control console. The white background will permit observations of the flame, smoke and burning characteristics of the material. The viewing of the exit sign help to correlate the visibility and measured values. The specimen is supported on a 64 m.m. base and is equidistant from all sides of the chamber. The screen will lie on a stainless steel bezel supported by a rod through the right side of the chamber. From the same rod a similar bezel located. This rod supports a square of asbestos paper which cactus any material that drip from the specimen during the test. By rotation of the specimen holder rod, the burning specimen is quenched in a shallow pan of water positioned below the specimen holder. At the above location and out side the chamber tubular boxes containing the light source with necessary lens and mirror on one side and a special photocell with a set of baffles to prevent stray light, on the other side are provided. The light source is fitted inside the tubular box on the left hand side of the chamber. The source consists of a lamp with a regulated power supply fitted with a reflector mirror, and a converging lens. The reflector lens arrangements make the light beam on the photocell housed in the right hand side box. The percentage of light absorbed will be displayed through a linear amplifier digital electronic photometer with 0% to 100% absorbency scale with auto calibration system.

• Chamber Size: 300 mm x 300 mm x 790 mm

Smoke Density Apparatus is used for measuring & observing the relative amount (Density) of smoke produced by the burning (combustion) or decomposition of Plastic, Cables etc. under controlled conditions.

Smoke Density Test Apparatus, California Bearing Ratio Apparatus

Smoke Density Test Apparatus, compression molding machine

Smoke Density Test Apparatus, subsonic wind tunnel, Colour Matching Cabinet