Spade Drills Dealers

• Material: Tool Carbon Steel
• Diameter: 20-35 mm
• Length (mm): 140 mm
• Surface Finish: Powder Coated

• Features: Robustness, Easy to install ,Non corrosive

• Material: Solid Carbide
• Type: Straight Shank
• Usage/Application: Industrial
• Diameter: 8 mm
• Brand: Shri Ravi
•  :  

• Country of Origin: Made in India
• Color: Silver
• Brand Name: Omicron
• Features: High mechanical toughness , Ease in installation, Flawless finish
• Metal: HSS
• Size: Customize
• Dimension: As per customer requirement

- Reduce set-up time, it easily can be replaced on the   machine.- The ability of the standard spade drill to accept a   wide range of different diameter inserts instead of   the "one-tool, one-diameter" requirement of   indexable insert drills.- Spade Drills can evacuate chips from the hole as   efficiently at the slower speeds and feed rates.- The coolant-fed design assures that coolant gets to    the cutting

• Features: Robustness , Easy to install ,Non corrosive

• Features: Robustness , Easy to install, Non corrosive

We have given SAMAR for holes that are accurate, fine finished and without ovality. These tools are serving you for last 3 to 4 decades. Now we have come-up with Spade Drill to replace costly Twist Drills. These, we found, are successful in long and deep drilling upto 20 times its size(i.e. dia.75 – 1250mm deep with thro’ coolant). Recently we have successfully demonstrated Dia. 73 x 1250mm length in BHEL. It was a Skoda horizontal boring machine. RPM 18 and feed 0.5mm.The time saved was more the 1/3 or the earlier tools. We, therefore, want you to know that any problem of deep drilling can be tackle with our Super Spade Drill.   Spade Drills are a known device which surpasses twist drills in many ways.   Operational :   More inherent Rigidity. Heavier feed rates compensates for the 10% to 15% reduction in RPM. More chip clearance adds to production efficiency. Quality of holes made by Spade Drills is Superior to the twist Drills. Hence Reaming/burnishing can follow immediately. Fractional sizes i.e. 25.1, 30.9 etc can be made available by making such blades.       Economical :   Two piece construction facilitate a number of blades on one shank. Blades are replaceable and can be reground. Same blades can be used on short, long and extra long shanks. Depth to diameter ration in Spade Drilling has been achieved upto 20:1 through Coolant arrangement is a must. With special Blades, core drilling, counter Boring and Bottoming to flat or contoured shape can be achieved. The shanks can be offered in straight to tapered, long to extra long and with ISO-40. We can give Spade Drills from 18.00mm to 140.00mm in 14 sizes.       Instructions For Using Spade – Drills   Generally the speeds used for H.S.S. Spade Drills are in the low to medium ranges. Whenever , the Feed is high, depending upon the hardness of the material , the speed can be varied to avoid vibrations. If the blade experiences burning on periphery, then reduce speed. While using Carbide Spade Drills, it is advisable to predrill the work piece with a dia.10mm twist drill & then to use the Spade Drill. The carbide Spade Drills are to be used with high speeds & low Feeds as given in the Chart. However, if any vibrations are occurring, then the Feed has to be reduce in increments.

• Material: Steel
• Type: Taper Point
• Feature: Faster Drilling
• Size: 15mm
• Length: 300mm

• Material: High Speed Steel
• Type: Taper shank and straight shank
• Size: 14 mm above
•  :  

spade drills, Cotton Twill Fabric, Duck Fabric, Oxford Fabric, Satin Fabric

spade drills, Groove Mill Cutter, burnishing drills, carbide pins

spade drills, Hammers, hand tools, tractor ploughs

spade drills, cnc solid carbide end mills, TCT Circular Saw Blade

spade drills, Boring Tools, Forming and machining tools, lamp components

spade drills, Centre Drill, step drills, Reamers, Milling Cutters

spade drills, step drills, Solid Carbide End Mills, Solid Carbide Cutter

spade drills

Samar - Spade Drills

spade drills, Garden Tools, Scissor