Specimen Mounting Press Dealers

• Operates on: 220 Volts A.C. supply.
• Capacity: 5-10 Ton
• Material: Mild Steel
• Diameter: 1 1/2
• Stroke: 100 mm
• Output: 1000 kg
• Brand Name: Radicon
• Model: RMP-942

Specimen mounting press with digital control panel this machine is good working and easy sample and Alarm Timer Knob main line indicator signal face supply hydraulic jack MS sheet frame MS rod pillar iron plating .For permanent mounting of metal & rock specimen in the thermosetting plastic or Bakelite powder. The unit of a rugged construction and is activated by hydraulic press capable of total lift of approx 2 tons. The press is provided with electric mould heater controlled by imported sunvic energy regulator and neon lamps indicator fitted in small cubicle. Supply includes finned cast aluminium cooler to cool down the mould. Unit

• Country of Origin: India
• Condition: New
• Brand Name: Almicro
• Power: Electronic
• Usage: Mounting Press
• Packaging: Plywood Cases

Specimen Mounting Press ( Small Size) This machine is used for mounting the specimen with bakelite powder and also to handle properly without the conduction of heat to the operator while grinding/lapping the specimen. It also helps for proper alignment while using with microscopes. This machine will also help to reduce the recurring cost of consumable drastically unlike using a cold setting compound. This machine comes with powder coating finish for corrosive free life.    This Model of Specimen Mounting Press ( Small Size) is smaller in size, which is more economically viable and is well suited for educational institutions.

• diameter: 30 mm.

For mounting the specimens with Bakelite powder Specimen is kept face down in the Cavity & bakelite Powder is Hot moulded around it with hydraulic pressure.

Automatic operation mm, 30 mm, 40mm, 50mm mold capacity Duplex mold Fast 1250 watts mold heater unit with water cooling Digital temperature timer control unit with LCD display Feather touch control panel Pneumatic application Alarm indicators for cycle completion

• Type: Manual
• Brand Name: Radical
• Hand Specimen Leveler Press: Manual

Specimen leveling press is designed to present a flat sample to themicroscope for improve micro-graphs.

We are offering specimen mounting press. Xq-1 is manual mechanic mounting press with 3 different size of mounting mould. Temperature and heating time can be setup and shown manual on the panel.

Permanent Mounting of metallography specimen for correctpolishing results. • Helps polishing small specimens & edge retention. • Reliable hydraulic jack with pressure gauge. • Mould heater fast cooling (airwater), timer; buzzer facilities, automatic cycles. • Electronic auto auto off.

• Voltage: 220 Volts A.C
• Usage/Application: Industrial
• Material: Aluminium
• Power Source: Electric
• Brand: Metzer

• Size: 73x41x24mm .

Mounted Specimen, Insect Gives Students An Up Close Study Of This Unique Creature Encased In Clear Acrylic.

• Hydraulic press of capacity: 8 tons.
• Unit operates: 220 Volts AC
• Specification: painted in hammartone finish and chrome plated.

Automatic metallography specimen mounting press is a kind of full automatic mounting press, equipped with in-out water cooling system. It is suitable for the heat mounting (thermohardening & thermoplastic) for all kinds of materials. After the parameters such as heating temperature, heat preserving time and applied force etc. are set up, put the specimen and mounting material into the machine, close the cover and press the start button, then the machine will finish the job automatically. It is not necessary for the operator to be on duty. According to different requirements of the material, there are four kinds of moulds that can be chosen to meet the demands at will. Also it is available to prepare two pieces of specimens at the same time, the capacity is doubled.   Technical specifications: Diameter of specimen: Ø25mm, Ø30mm, Ø40mm, Ø50mm 2. Power supply: 220V, 50Hz 3. Max. power consumption: 1800W 4. Setting range of system pressure intensity: 0-2MPa (corresponding preparing pressure intensity: 0-72MPa) 5. Temperature setting range: 0-300 ºC 6. Heat preserving time: 0-99m99s 7. Dimensions: 615 × 510 × 500 cm 8. Net weight: 110Kg 9. Cooling method: water cooling

Mounting press for metallurgical specimen mounting. Models – manual, semiautomatic & fully automatic.

Specimen Metallurgical Press Is Used For Mounting The Specimen With Bakelite Powder. It Is Also Used To Handle The Specimen Properly Without The Conduction Of Heat To The Operator While Grinding/Lapping. It Also Helps For Proper Alignment While Using With Microscopes.   Product Code : SAMS MET - 002

• Model: HV-EXP3755

This machine is used for mounting the specimen in a Bakelite Powder and also to handle properly the specimen during polishing. The unit is of a rugged construction and is activated by a hydraulic press , with a pressure gauge to read the pressure being applied while mounting. The press is to be supplied complete with mould heater and thermostat with 25 mm dia mould assembly..

Specimen mounting press, We also manufacture the equipments and control systems for sugar industries mainly mill automation, boiler instrumentation, prd stations and embibition water control system.

• Country of Origin: India
• Application: Laboratory
• Condition: New
• Warranty: 1year

Just Press a button and get the mould. Dual mould capability Pneumatically operated. Reliable microcontroller based technology offering complete automation like pressing, heating, holding, cooling ( water circulation ). Transparent mould capability enabling seeing identification mark. Easy mould interchangeability Fast mould production. Moulds produced - 1 " , 1 1/4 " , 1 1/2 ". Heater - 1000 Watts Cooling - Automatic water circulation. Air pressure required - 150 PSI Electrical supply - Single phase.

Corrosion resistant steel Cabinet with built in Hydraulic system and Individual power pack and Cylinder.Digital Temperature Indicator and digital timer with LCD Display System,Hydraulic Fully Automatic system,Stainless steel body Pressure Gauge system,Dovetail slot for easy changeability of Mould Assemblies,Timer-Buzzer indication for heating and cooling cycles.

• Mould cylinder Diameter: 1â��
• Mould heating: By band heater of 1000 watts, Thermocouple
• Mould cooling arrangement: By water circulation around band heater assembly, operated through solenoid valve
• Control Panel: Temp. Controller to feed exact required current, Avoiding the temperature overshooting leading to heat treating of the sample, Setting of Temperature
• Standard Accessories: Powder pouring spoon, Bakelite Powder, Required Spanners
• Power Supply: 230 V AC 50 Hz

Model: CMP-P Automatic Specimen Mounting press is pneaumatically operated user friendly, automatically operated with rigid construction, with interchangeable mould capability and complete enclosed body. QUICK OVERVIEW:     Optional Spares and Consumables Mould cylinder 1", 1.1/4", 1.1/2, 2”, Band heater element, Bakelite moulding powder, Mould release spray

• Brand Name: VAISESHIKA

we are offering vaiseshika specimen mounting press. description xq-1 is manual mechanic mounting press with 3 different size of mounting mould. temperature and heating time can be setup and shown manual on the panel. specification mould diameter 22mm, 130mm, 145mm input voltage 220v50hz, 110v60hz. power max. 650 w dimension 340x260x430 mm (approx.) weight 33 kg (approx.) for our complete product range.