Splice Protection Sleeves Dealers

• Material: PVC
• Brand Name: O VISION GOLD
• Density: 0.95 g/CM3
• Tensile Strength: Greater Than or Equals 18.1MPa
• Outer Jacket Material: Polyolefin
• Length Change Ratio: 0+/-5%

Ribbon series fusion splice protection sleeve is designed to accommodate 2 - 12 ribbon fiber. Stock lengths are 40mm, but are also available in a new 30mm length for smaller packaging requirements. This product is constructed with an inner EVA meltable adhesive tube, a polyolefin heat shrink outer tube and either single or dual strength members. Our single strength member sleeve which has become an industry standard, has an after shrink diameter of 4.9 X 4.4mm, and utilizes a special glass member. Our dual strength member sleeve is designed to "sandwich" the ribbon, thus eliminating any undue stress on the fiber, and has an after shrink diameter of 5.7 X 4.9mm. This option is available in a variety of glass and special high temperature plastic member combinations. The tubes are clear to allow viewing of the fiber during and after splicing. The entire assembly is designed to ensure that all members maintain perfect alignment during shipping, handling and shrinking.

• Material: Metal
• Shape: Square
• Certification: ISI Certified
• Color: Silver
• Pattern: Plain
• Surface: Polished

• Material: Steel
• Application: Industrial
• Color: Silver
• Thichness: 6 Mm - 8 Mm
• Surface: Polished
• Ultimate Strength >: 10.4Mpa

• Material: SS
• Length: 60 mm
• Diameter: 2.5 mm
• Material Grade: SS304
• Measurement System: Metric
• Pack Type: Box
• Quantity Per Box: 400 Pieces

• Material: Fiber
• Shape: Round
• Color: Transparent
• Application: Industrial
• Pattern: Plain
• Type: Fiber Sleeves
• Size: 40mm,60mm

• Application: Industrial
• Features: Rust proof contact, Air tight connection, Long lasting performance
• Brand: Fibros
• Packaging Type: Polythene
• Length: 60 mm
• Diameter: 3 mm
• Ultimate Elongation: 700.00%

• Brand: Nav Fibro Plastic
• Weight: 0.028 Ounces
• Length: 60 mm
• Operating temperature: -45 to +100 DEg C
• Steel Rod Diameter: 1.5 mm
• Diameter fusion tube: 1.4+0.1 mm
• Density: 0.94 g/cm3

Offered by us, are Fusion Splice Protection Sleeves that are preferred for restoring integrity after splicing. The Fusion Splice Protection Sleeves are acclaimed for their high resistance against cracks, drips, heat shocks, flowing, etc. Moreover, we are the foremost Exporter, Wholesaler and Trader of Fusion Splice Protection Sleeves. Attributes Restores mechanical and environmental integrity of coating of optical fiberEnsures assembly integrity Effective encapsulation of fusion spliceAvoids rupturingExcellent performanceReduced shrinking timePolyolefin Ethyl Vinyl Acetate hot melt adhesive tubeStainless steel 316 grade - burr free strength memberIncreased battery life

• Features: Airproof configuration, Protect optical fiber splicing from damage, Maintain the optical transmission performance of the optical fiber
• Application: Telecom Industries, ISP, Cable TV, Electrical and Telecommunication, Fiber Splicing machine
• Operating Temperature: -45 degrees to 100 degrees   
• Outer diameter after recovery: OD2.7 mm + / - 0.1mm
• Hole diameter before recovery: OD1.7+ / - 0.1mm
• Pin diameter: OD 1.2 mm+ / - 0.1mm
• Minimum installation temperature: 110 degrees
• Maximum installation time: 60 seconds
• Standard colour: Clear
• Compliant norms: UL224,MIL-I-23053, GR-1380-CORE, ZN-96 TPSA-006
• Compliancy: RoHS compliant

The Splice Protection Sleeves are designed to completely encapsulate splice and offer environmental and mechanical integrity of coating or buffer of optical fibre after splicing. Splice Protection Sleeves are manufactured using very advanced and precisely controlled manufacturing technology. Features     Outer tube conforms to MIL-I 23053 / 5 class 2 Inner tube made from Polyolefin Copolymer (Ethyl Vinyl Acetate) Resistant to heat shocks Effectively encapsulate fusion splices Better corrosion resistance even in coastal environment Sleeves are pre-shrunk which ensures integrity of assembly during transportation Available in different types, diameters and lengths as per customer requirement. Standard Sleeve     Available in 60 mm & 45 mm lengths Diameter after shrinking is 3 mm Available in clear & colored versions   Slim Sleeve     Reduced dia components for a smaller finish Available in 60 mm, 45 mm & 40 mm lengths Diameter after shrinking 2.5 mm   Dielectric Sleeve     Non metallic central strength member Resistance to corrosion & electricity Available in 60 mm & 45 mm lengths Diameter after shrinking 3 mm / 2.5 mm   Micro Sleeve     Used where space is very limited Available in 35 mm & 25 mm lengths Recovered dia 1.5 mm   Ribbon Sleeve     Suitable for 4 to 12 fibre Ribbon High mechanical strength with ceramic strength member Standard length 40 mm   Applications     Protection of single fibre splices Protection of Ribbon fibre splices   Specifications       Outer Tube Polyolefin     Working Temperature: -50°Cto 125°C Min. Shrink Temperature: 90°C Ultimate Strength: 220 Kg / cm² Elongation: 650% Specific Gravity: 0.95 Fungus Resistance: Inert Solvent & Acid Resistance: Good Toxicity: None Ends: Smooth, even & consistent Strength Member (Single Fiber Sleeves): 316 Stainless steel with rounded and polished ends Strength Member (Ribbon / Dielectric sleeves): Polished ceramic (white) or Quartz (transparent)

The fusion spliced region of the fiber is bare glass and thus needs to be protected. Various systems designs are used to carry this out. Heat shrinkable or thermo shrinking type is the most popular method used to protect spliced fiber. It is easy, convenient and reliable method to protect bare fiber. As most splicing machines come with an oven no special tools are generally required to carry out such an installation. As the most commonly used method, familiarity with the process has become virtually universal with industry personnel.

• Material: SS
• Application: LAN, Telecom Industry
• Brand: Aares
• Features: Cut Resistant
• Surface: Powder coated
• Features: Rust proof contact,Air tight connection,Long lasting performance

• Brand Name: TEECEE

We are offering splice protection sleeves. We are approved form cact for manufacturing splice protection sleeves. Thease are used for splicing the fibres. They protect the fibre after splicing. Though small in nature but has important role to play. Fibre protection sleeves are supplied with each joint closure and termination box as part of consumables in sufficient quantity. So no further requirement should be there fot this item separately. However, they are available separately also.

We are offering smv splice protection sleeves. Designed to restore complete environmental and mechanical integrity of coating or buffer of optical fiber after splicing. sleeves are manufactured using state of the art machines and controlled manufacturing environment.

• Feature: No influence on the fiber’s transmission,Splice point protection and intensity improvement,Easy operation and reduction of the risk of managing fiber .
• Steel needle Diameter: 1.0mm,1.2mm,1.5mm (Standard Single Fiber)
• Operating temperature ranging from: -45℃ to 100℃
• Applications: Aerial Strand Mount, Pedestal, Pole Mount, Strand Mount, Underground, Wall Mount
• Compatible: Compatible With BTI, CTB-FTB, FDST, PBO, PBPO
• Protection Sleeves Lenght: 35mm; 40mm, 45mm , 50mm , 55mm , 60mm,

• Material: Steel
• Country of Origin: Made in India
• Packaging Type: Polythene
• Length: 60 mm
• Diameter: 3 mm
• Ultimate Elongation: 700%
• Density: 0.94 g/cm3

• Working Temperature: -50°C to 125°C
• Ultimate Strength >: 10.4Mpa
• Elongation >: 200
• Shrinking start temperature: 70°C

- Sleeves are available for individual fiber as well as ribbon configuration – Outer tube made of polyethylene- Inner tube made of polyolefin copolymer- Strength member is made of stainless steel or Ceramic/quartz.

• Type: Splice Protection Sleeves
• Color: White, All color range
• Condition: New
• Country of Origin: India

Fiber sleeve protector - are designed to maintain the strength & environmental stability of Optical fiber cable after fusion splicing . Comes in a variant of 40 mm , 45 mm & 60 mm. In a pack of 12

Splice Protection Sleeves, fiber patch cord, Digital Attenuator