Spray Coating Machine Dealers

• Application: Agricultural
• Certification: CE Certified
• Weight: 100-1000kg
• Warranty: 1 year
• Surface: Polished

Liquid Fuel High Velocity Spray System Higher particle velocities Superior coating reproducibility Significantly improved bond strength Control over high/low , stable deposition rate Low operating cost Control panel DF 2210 provides necessary controls and interlocks to ensure easy consistance and safe operation Effecient particle heating High density coating through higher velocities No material build up in the barrel The system also gives a fault signal if any operational fault / parameters out of range condition occurs

• Certification: ISI Certified
• Weight: 100-150kg
• Application: Coating
• Warranty: 1year
• Material: SS
• Capacity: 10, 25, 50, 100 and 150 liters

We offer an advanced range of spray coating machines for rapid and uniform coating of tablets, granules and pallets. Spray coating machine work as an attachment to the existing coating pan. These machines feature stainless steel 316 quality pressure vessel provided with SS jacket with electric heaters and thermostat control. The unit is provided with safety valve, pneumatic oscillating type stirrer fitted on the top of the vessel. Our spray coating machines are available in different capacities such as 10, 25, 50, 100 and 150 liters.   Features All contact parts are of fabricated from quality SS 304/ SS 316 SS jacket with electrical heater and thermostat controller for heating of spray solution Pneumatic motor for stirrer Specially designed stand for holding spray guns Maintenance free operation Two spray guns are mounted on a portable SS stand The spray nozzles are operated with the help of a pneumatic cylinder connected with digital timer and solenoid valves programmed for a sequential spray The guns can be tilted at any desired angle The vessel is filled with the coating solution and pressurized with oil moisture free compressed air to get uniform atomized conical spray over the tablet bed inside the coating pan.

• Certification: CE Certified
• Feature: Low Maintenance
• Voltage: 220V
• Condition: New
• Automatic Grade: Automatic
• Power: 1-3kw
• Driven Type: Electric

FEATURES Up to 50 programmes with 24 segments each can be programmed. Ouick start function for repeat processes. User-friendly process configuration with touch screen panel. Process parameters: spray pattern, spray arm speed, spray time, spray beam cone. Electrically operated spray arm with selectable speed in the direction of the x-axis and the y-axis. Adjustable spray nozzle with constant nozzle pressure and automatic cleaning function. Control elements for dispensing compressed air and vacuum.

Manufactured and supplied from Thane, Maharashtra, Spray Coating Machine replaces the manual coating of tablets and granules and comprises pressure vessel with SS jacket and controlled heaters, safety valves, pneumatic cylinder that gives intermittent spray. Here the design used is cGMP and parts used are AISI 316 and 304. It comes with automatic coating system that consists of a solution holding tank, peristaltic pump, spraying gun and pneumatic control panels. The compressed air used is of 34 kg/cm2. It is available with two spray guns and pneumatic stirrer. It has a wide range of applications in food, agro, chemicals, and cosmetic industries.   Salient Features : Design is cGMP - Current Good Manufacturing Practices compliance. All contact parts AISI 316 & non contact parts AISI 304. Automatic spraying system for tablet film coating on conventional coating. Easy to moveable and dismantle for one machine to another machine and for cleaning. Easy to controls to atomized spray and flow of liquid. Automatic Coating System is Consists of  Solution holding tank. Peristaltic Pump Atomized Spraying Gun Adjustable Stand for Spraying Gun Automatic Electro Pneumatic Controls Panel. The system is available with one or more than spraying nozzle as per coating pan size. Solution holding tanks can be different capacity and with and without stirrer.   Vessel is filled with coating solution and pressurized by oil/ moisture free compressed air at pressure of 3 to 4 Kgs/cm 2 to get unifirm atomized conical spray. The coating is done by spray guns which are mounted on a heavy S.S stand can can be adjusted. Duration of air and liquid spray is controlled by a Digital Timer and Pneumatic cylinder through a solenoid valve.   Features : It is available with two spray guns mounted on S.S heavy stand which can be adjusted according to requirement. Provided with Penumatic Stirrer specially designed pneumatic cylinder is used which avoids dripping of liquid when spraying is stopped All contact parts are of S.S. 304 / 316 Spray guns are of Bullows make It is available in 25 ltrs, 50 ltrs, 100 ltrs & 200 ltrs size   Application : Coating Pan is used for are used to sugar coat tablets, pills, etc in for a variety of industries such as Pharmaceutical, Confectionery, Food and others. They are also used for rolling and heating beans and edible nuts or seeds.   It used in various industries such as Pharmaceutical Chemicals Food Agro Chemicals

At KERONE, we hold the expertise in designing and manufacturing of custom build spray coating systems for the diverse need of customer, every single machines designed by us, is known for its performance, efficiency and economy of scale. Spray coating is one of the most widely used in industries, because its highly versatile can be utilized for the number of applications. Application Coating protection coats on engines Pharmaceutical: antibiotics, medical ingredients, additives Industrial: paint pigments, ceramic materials, catalyst supports, microalgae

• Type: Automatic
• Condition: New
• Warranty: 1 Year
• After-Sales Service Provided: Spare Parts
• Capacity: 50-5000kg/h
• Operating Power: 380V 19KW
• Air Pressure: 0.6-0.8Mpa
• Air Consumption: 0.5m3/minute

Features : High performance Easy to operate Less maintenance

• Application: Coating Use, Industrial Use
• Color: White
• Voltage: 220V
• Condition: New
• Automatic Grade: Automatic, Fully Automatic
• Warranty: 1year
• Country of Origin: USA

MINI COTA (Semi automatic Spray coating Machine) is mainly designed to replace the conventional method of manual coating of tablets and granules. Mini cota is comprised of pressure vessel whish can be provided with S.S. jacket (for Sugar Coating) with controlled heaters, safety valve, pneumatic stirrer (Oscillating type) , spraying nozzles and compact control panel with Pneumatic cylinder for intermittent spray with timer. Vessel is filled with coating solution and pressurized by oil/ moisture free compressed air at pressure of 3 to 4 Kegs/cm 2 to get uniform atomized conical spray. The coating is done by spray guns which are mounted on a heavy S.S stand can be adjusted. A Digital Timer and Pneumatic cylinder through a solenoid valve control duration of air and liquid spray. SALIENT FEATURES: It is available with two spray guns mounted on S.S heavy stand which can be adjusted according to requirement. Provided with Pneumatic Stirrer Specially designed pneumatic cylinder is used which avoids dripping of liquid when spraying is stopped All contact parts are of S.S. 304 / 316   Spray guns are of Bellows make

OUND PROOF ACOUSTIC CHAMBERS JOB LOADING & UNLOADING ARRANGEMENTS CUSTOMIZED FIXTURES AUTOMATIC JOB MOVEMENTS GUN MANIPULATORS PLC CONTROLLED SYSTEMS DUST COLLECTORS PROPER VISION ARRANGEMENTS ROBOTIC INTEGRATION

We offer high quality range of automatic spray coating machine (minicoata). These are mainly designed to replace the conventional method of manual coating of tablets and granules. These are comprised of pressure vessel which can be provided with s.s. Jacket (for sugar coating) with controlled heaters, safety valve, pneumatic stirrer (oscillating type), spraying nozzles and compact control panel with pneumatic cylinder for intermittent spray with timer. operations : vessel is filled with coating solution and pressurized by oil moisture free compressed air at pressure of 3 to 4 kgscm 2 to get uniform atomized conical spray. The coating is done by spray guns which are mounted on a heavy s.s stand can can be adjusted. Duration of air and liquid spray is controlled by a digital timer and pneumatic cylinder through a solenoid valve. features : it is available with two spray guns mounted on s.s heavy stand which can be adjusted according to requirement provided with pneumatic stirrer specially designed pneumatic cylinder is used which avoids dripping of liquid when spraying is stopped all contact parts are of s.s. 304 316 spray guns are of bullows make it is available in 25 ltrs, 50 ltrs, 100 ltrs & 200 ltrs size

• CAPACITY: 10 / 25 / 50 / 100 / 150 Ltrs.

This is conventional and complete system to connect any Coating pan and most suitable for the rapid and uniform coating of Tablets, Granules & Pallets. The system consists of a stainless steel 316 quality pressure vessel provided with S .S. jacket with electric heaters and thermostat control and provided with safety valve, pneumatic oscilating type stirrer fitted on top of the vessel.

• Benefits: Electrostatic powder charging with 100 KV powder spray gun.,Special Attachment to coat billets etc.

It acts as a release as well as lubricant agent between dummy block and billet. BN powder enhances the life of die and reduces the per ton extrusion cost. Application of Boron Nitride powder also improves the quality of the extrusion, as it eliminates any black marks.

• Country of Origin: India
• Warranty: 1 yrs
• Material: Mild Steel
• Operating Mode: Semi Automatic
• Voltage: 220V

We offer minicota (semi automatic spray coating machine ) is mainly designed to replace the conventional method of manual coating of tablets and granules. mini cota is comprised of pressure vessel whish can be provided with s.s. Jacket (for sugar coating) with controlled heaters, sagety valve, pneumatic stirrer (oscillating type) , spraying nozzles and compact control panel with pneumatic cylinder for intermittent spray with timer.

• Type: Spray Coating Machine
• Condition: New

Spray coating machine many solid pharmaceutical dosage mediums are produced with coatings, either on the external surface of tablets, or on materials dispensed within gelatine capsules.Coating serves a number of purposes right from protecting stomach lining from aggressive drugs to protecting the tablet from stomach acids. It also helps in maintaining the shape of the tablet and thus can offer a delayed release of the medication.

We are well known for supplying of wide variety of Spray Coating Machine.

For substrates with a highly structured wafer topography, deep MEMS structures or a non-planar surface texture, the iSPRAY-300 by SAWATEC ensures that the coating is as homogeneous as possible. It is a high-precision spray coater for manual spray coating or spray development processes and it is used specifically in research and development laboratories, for pilot productions and small production units in MEMS fabrication. FEATURES Up to 50 programmes with 24 segments each can be programmed. Ouick start function for repeat processes. User-friendly process configuration with touch screen panel. Process parameters: spray pattern, spray arm speed, spray time, spray beam cone. Electrically operated spray arm with selectable speed in the direction of the x-axis and the y-axis. Adjustable spray nozzle with constant nozzle pressure and automatic cleaning function. Control elements for dispensing compressed air and vacuum.

• Coating: Thermal Spray
• Brand Name: Parat
• Condition: New
• Port: New Delhi, Mumbai
• Place of Origin: Rajasthan, India
• Packaging Details: Standard export packaging