Spring Hangers Dealers

• Material: Metal
• Length: 0-25inch
• Color: Grey
• Surface Finishing: Power Coated
• Feature: Corrosion Resistance, High Quality
• Weight Capacity: 0-5Tons
• Hanger Thickness: 0-50mm

We are into the business of manufacturing, exporting and supplying excellent grade Spring Hanger (50 mm) with 50 mm standard deflection. Our Spring Hanger is used for isolation of vibration produced by suspended mechanical equipment, low speed suspended fan, transformers, ductwork, piping, etc. Spring Hanger that we offer is especially recommended for isolating any suspended source of audible or inaudible noise and vibration with minimum static deflection requirement exceeding 25 mm and up to 50 mm. Moreover, bulk quantities of our Spring Hanger can be obtained at very affordable rates from us. Conforms To Designed to BS 1726 1: 1987 Tolerance to BS 1726 1: 2002 SAE and Ashrae Guidelines for vibration Isolation Features Spring Diameter to height ratios are designed to ensure that spring will never buckle even when fully loaded. Suspension rod misalignment (30 degree arc) is compensated in hanger design. Locking rubber bush centralizes the spring and prevents dislocation. Springs are powder coated with appropriate color coding to facilitate identification. Frame is made of G.I. Steel and powder coated to 100 microns paint thickness (exceeds 1000 hours of salt spray test) and conforming to ASTM B-117. Isolation brackets are capable of overloading upto 500%. Option Frame Hot dip Galvanized. Part Number Prefix with "HDG". Spring Neoprene Coated. Part Number prefix with "N". Spring Plastic Dip coated. Part Number prefix with "P". Spring Hangers of higher capacity and Deflection shall be Engineered as per Specific Requirements. Nomenclature for special Engineered spring hangers shall be SSH (XXX-Deflection G (XXXXX-Load) Selection / Ordering : Point load (Calculated to include all variables such as weight of water in pipe lines etc if applicable). Installation Guide Lines : Included in Packaging.

SUPPORT RANGES OF CONSTANT SUPPORTS All constant hangers support ranges are three series CSH-1, CSH-2, CSH-3 in various sizes. CSH-1 Deflection up to 100 mm and load will be medium. CSH-2 Deflection up to 200 mm and load will be medium to heavy. CSH-3 Deflection up to 300 mm and load will be medium to heaviest. Support Range : Travel: 40 mm to 350 mm Load: 16 Kg. 15000 Kg.

• Material: S.G. iron
• Brand Name: GST
• Usage/Application: Garage

• Type: VSH
• Brand Name: TECHNO
• Material: EN-45/47 with is-2062 7 IS-1239
• Style: Variable load hanger
• Wire Gauge: As per Loafd range
• Usage: powr plante / steel plant / sugar plant / refinery ---etc
• Country of Origin: India
• Model Number: VS1- VS2 & VS3- Size will Be 1 to 25
• Standard: MSS-SP-58 , MSS-SP-69
• Steel Grade: Spring & other Materials

• Color: Orange
• Product Name: EASYFLEX Spring and Rubber Hangers
• Usage: HVAC

Easyflex Spring Hangers consist of freestanding, laterally stable steel springs in series with molded elastomeric elements assembled into stamped and welded hanger brackets. The hanger braket and springs are powder coated. They are designed to provide high efficiency isolation from structure-borne vibration and noise. They are color coded according to load ratings and are designed for 50% voeralead. They are double deflection Hangers specially suitable for Seismic Applications.

• Country of Origin: India
• Material: Stainless Steel, SS320 And Per Client Requirement
• Grade: ANSI, AS, ASME
• Color: Metallic, Shiny Silver, Silver
• Feature: Accuracy Durable, High Quality, High Tensile
• Surface Finishing: Polished
• Certfication: ISO 9001:2008 Certified
• Weight Capacity: 0-5Tons
• Hanger Thickness: 0-50mm

• Country of Origin: India
• Type: Spring Hangers
• Material: Carbon Steel, Metal
• Length: 0-25inch, 25-50inch, 50-75inch
• Certfication: ISO 9001:2008 Certified
• Weight Capacity: 0-5Tons, 10-20Tons, 20-40Tons
• Hanger Thickness: 0-50mm, 100-200mm, 50-100mm
• Brand Name: Easyflex

Spring Hangers consist of freestanding. laterally stable steel springs in series with a molded elastomeric element assembled into a stamped and welded hanger bracket. The hanger brackets and the springs are powder coated. Spring vibration isolation hangers are designed to provide high efficiency isolation from structure-borne vibration and noise. Springs are color-coded according to load ratings and are designed for 50% overload.

• Size: 1/2 inch
• Material: Rubber
• Type: Constant Spring Hanger
• Color: Black,Blue And Silver
• Finishing: Painted
• Usage/Application: Industrial
• Technique: Hot Rolled

• Application: Fans, Fan coil Units, Ducts and Pipes
• Material: MS and GI
• Capacity: 3-40 Kg
• Weight: 250-300 gm

Variable spring supports are used where pipelines are under high pressure, high temperature and results in vertical movement. To allow vertical movement, all the loads are taken care of by variable spring support in both the hot and cold position. The variable spring supports are utilized to protect valuable instruments, pipelines and critical components. The designs of the variable spring supports are based on loads, movement & models to suit the required positions on pipelines and also depending on the weather condition. RangeWe offer five series prefixed VS1, VS2 VS3, VS4 and VS5. Twenty-five spring sizes allow a range of load 8.2 kgs to 29,700 kgs. In all the series VS1, VS2, VS3, VS4 & VS5 provide travel 40 mm, 60 mm, 80 mm, 120 mm & 160 mm respectively. It also takes 5˚ Co-Liner displacement. We offer models such as A, B, C, D, E, F & G.   Special Range/DesignApart from our standard design and product range, we undertake jobs specially designed by us to suit client’s requirement. To avoid corrosion, we offer neoprene rubber coating on spring and epoxy painting/galvanizing. Design PrinciplesSupport components are arranged in a series of load groups, the load within each load group is in strict accordance with the permissible load of the connecting thread. All supports have a strictly symmetrical shape, have single upper and lower load connection resulting a moment free load connection to the structure. The actual travel position of the hangers/supports can be read directly from the travel scale in mm. in accordance with the actual travel. All hangers/supports can be blocked in installation position within a close raster.   Supply StandardAll hangers / supports have a rivet on name plate with travel scale, displaying series, size, type, hot load, cold load, travel and client’s. Each and every spring support / hanger assembly is guaranteed for a period of 18 months from the date of supply or 12 months from the date of commissioning, whichever is earlier. We shall replace with free of charges if any materials, which owing to defect in raw materials or workmanship, should fail within guaranteed period.        

Style MIH/S are Helical Spring Hangers of free standing design, laterally stable in series with an elastomeric element Bottom Neoprene Cap isolate high frequency structure borne vibration and noise Cap with projecting bushing hold the Spring in place & it also provide protection against steel to steel short circuiting due to rod misalignment Rod can swing through an arc of 30 degrees from side to side in any direction before contacting bushing Hanger is provided with Pre- compression Plate with adjustment Nut on the bottom rod to pre load and create plate clearance

We offer 30 size of group A to O and three series prefixed CS1, CS2 & CS3 for both horizontal and vertical model. 30 sizes constant spring support allows a load range from 25 kgs. to 16020 kgs. and maintains a travel range upto 300mm.

Our comprehensive service includes the supply of a wide range of pipe hangers equipment .Existing facilities for the design and supply of any special pipe support fabricated and in a wide range of materials to suit the customer's requirement. Designing and manufacturing system are controlled documents system incorporated in our quality assurance and quality control plan.

We are offering different types of spare parts. 1.HANGER PIN 2. QUARTER PIN 3. HUBS WASHER 4. SPRING HANGER 5. U TYPE HANGER 6. SPRING LEAVES 7. HARROW CHECK NUTS 8. HUB BOLTS 9. TRAILOR HUB

Features:- spring hangers consist of freestanding; laterally stable steel springs in series with a moulded elastomeric element assemble into a stamped and welded hanger bracket. The hanger brackets and the springs are powder coated. Spring vibration isolation hangers are designed to provide high efficiency isolation from structure-borne vibration and noise. Springs are colour-coded according to load ratings and are designed for 50% overload. Applications:- hangers are used to isolate suspended sources of both noise and vibration. Suspended mechanical equipment such as air handling units, fcu's cabinet fans, piping and ductwork in close proximity to rotating mechanical equipment are typical applications of model hangers.

• Features: Sturdiness, Rust proof, Fine finish

• Material: Mild Steel
• Surface Finishing: Polished
• Country of Origin: Made in India
• Type: Hanger
• Usage/Application: Industrial
• Brand Name: Vibro
• Size/Dimension: 3 Inch

• Application: industrial
• Usage: Industrial, Garage
• Material Grade: SS304 and Others
• Deflection: 25 mm
• Capacity: 10 - 750 kg
• Mount Constant: 0.4 - 30 kg/mm

• Application: Industrial
• Material: Mild Steel
• Brand Name: Easyflex
• Length: 57 mm
• Load capacity: 21 - 8,200 lbs
• Isolator Model: EFSH 20/15
• Rated Load: 15 Kg
• Deflection: 20 mm
• Width: 38 mm
• Height: 70 mm
• Top Hole: 12 mm