Static Eliminators Dealers

Low cost lightweight static eliminator. Tiny conductive micro-fibers provide thousands of conductive points across its surface, which cause the static charge to ionize and flow to ground.

• Warranty: 1 Year
• Voltage: 220 V
• Country of Origin: Made in India
• Weight: 7 kgs
• Noise Level: 55 dbA at 1m
• Dimension: L 1100 x B 170 x H 130 mm

• Color: Grey
• Condition: New
• Application: Industry
• Feature: Superior Functionality
• Voltage: 220v
• Phase Type: Single Phase
• Type: Static Charge Eliminator
• Warranty: 2 Yrs
• Country of Origin: India

Textile industries plastic industries 

These are active static elimination systems. Our E - Bars, Electrostatic discharge bars, eliminates static effectively from the sustrate surface

• Power Supply: 230 V AC, 50 Hz
• Weight: 5.5 Kg
• Frequency: 50-60 Hz
• Output Power: 5.5 Kv
• Output Short Circuit Current: (Ik) < 5 Ma
• Power Consumption: Approx 50 VA
• Maximum Load: 10 M (Hv Cable Incl. Electrode)
• Mains Cable Length: Approx 2.5 Meter With Earthing -pin Plug
• Dimension: 165 X 240 X 190 mm

We deal in Static Charge Eliminator, which is specially designed compact tool for effectively eliminating static charge. Before fabricating Static Charge Eliminators, we conduct thorough research on the grounds of efficacy and accuracy. Thus, our revolutionary Static Charge Eliminators ensure high performance. We make available the feature-packed Static Charge Eliminator range at relatively low price. One can place bulk orders for Static Charge Eliminator with us.

• Brand Name: Filmtreat
• Voltage (V): 220 V
• Frequency: 50 Hz
• Output Power: 5. 5 / 7.5 / 10 kV
• Number of Bar: Max. Four Bars - Total Length Not More Than 10 Ft
• Output Selection: High/Low/Med/Off
• Indicator: Mains On Indicator
• Features: High efficiency bar & Maintenance-free bar design resulting in longer unit life, Multiple bar connection to a single power supply, Easy and speedy installation design

  Key Features  Shock-less; no damage when electrodes are earthed Engineered plastic enclosure, with epoxy encapsulated parts Discharge range of 80 mm, under ideal conditions Regular sizes for web widths up to 4.5 m Custom-made higher lengths possible (standard 2 m HV interconnecting cable) 230 V, 50/60 Hz, single phase input Stable HV output, with in-built current limit Three HV output connectors for VR 20 bars Compact, dust-proof and rugged construction 2 m input cable with built-in fuse and power switch Mild steel fabricated, powder coated enclosure

Materials such as paper, plastic or textiles normally contain an equal number of positive and negative charges that is, they are electrically balanced. Friction can disturb this balance, causing the material to become electrically charged. The electric charge(Static) will exert a force on nearby charged objects or a grounded conductor. Among the problems caused by this force are Dust clinging to product, Product clinging to itself, rollers, machine beds or frames, Materials tearing, jamming or curling, Sheet feeding problems, Hazardous sparks or shocks. EXAIR'S static eliminators (called ionizers) can eliminate the charge. These shockless ionizers are electrically powered and produce a bulk of positive and negative ions. The charged surface attracts the appropriate number or positive or negative ions from the ionizer to become neutral( discharge)

Static is stationery electric charge, which forms on the surface of non-conduction ( Insulators ) and un-grounded isolated conductors. Friction pressure and separation are the main reason for creation of static. If two materials come in contact with each other and then separated, electronics may be transferred from one to other. A charge in temperature also create charge. Static electricity is thus the imbalance of positive and negative charges. When a moving web comes in contact with a rubber, steel or aluminium roller and separated from it, static electricity gets created on web both web and the roller. Bare films, paper and rubber roller being non-conductive, there is no free flow of electrons. Thus the static charge on films and paper dissipate very slowly. Metals roller are foils being conductive allow free flow of electrons to ground, since they are invariability earthed conductors will develop a static charge if they are insulated from ground. The magnitude of the static charge will depend on the materials, applied forces, separation rate, temperature and relative humidity.

The Eltech 331 Static eliminator power unit is the most important of different Eltech's static control equipment. The instrument produces high voltage, low current in a controlled and safe manner. It's compact size and structure is suitable for most industrial environments. The defect free products and quality ensures efficient use and maximum customer satisfaction.We have designed the Eltech 331 Static eliminator power supply and the different discharge bars for active discharging of disruptive static charges, which develop during the production processes. The discharge bars and the power supply are used primarily in cases where disruptive static charges on fast moving material webs impair production processes and required to be eliminated.

• Warranty: 12 months
• HV Power supply: (LBH) 165 x 240 x 190 mm, 9.0 Kg
• Input Supply: 3 PIN 230V AC 50Hz 50 Watts
• Output voltage: 6 - 7 KV AC 5ma
• No. of bars: Maximum 2
• Max load: Equivalent to 10m of cable including bars
• Short circuit: Protection
• Construction: Powder coated MS cabinet
• Radiated EMI: Internally shielded
• Ionizing Bar: Shockless SS electrodes with 2m cable
• Neutralising distance: 50mm max from needle tip

• Weight: From 350gms
• Maximum Operating Temperature: 85°C
• Operating voltage: 7.0kV
• Pin energy: Approx 0.15 millijoules
• Construction: Anodised aluminium
• Cable: 2 metres shielded in flexible conduit; longer lengths can be ordered

  The inductively coupled design provides powerful static neutralisation and completely shockproof operation. The Model 912 is powered by the Model 904 and is suitable for applications where 360° neutralisation is required.   Features & Benefits Powerful ion production Fast charge decay times Shortcircuit-proof Accidental earthing of one electrode allows the remaining electrodes to continue to operate

This bench top  instruments  neutralize ESD workstation with a stream of IONIZED AIR. This removes static charges from non-conductive objects  and surfaces.

• Feature: Powder coated, mild steel construction Weight 12 kg; dimensions (in mm): 510 L × 160 W × 450 H Noise level less than 80 dBA at 1 m distance Air volume of 620 cubic metre per hour Power consumption 100 W Etc
• BENEFITS: Easy installation, commissioning Extended working distance of up to 1000 mm Shock-less Etc.

The Valstat® CS 11 static eliminator is an ionising blower used to blow ionisied air on any 3D2D object on which static is to be neutralised. It consists of a single phase motor with a double inlet impeller and Valstat® static eliminating units. Ambient air is drawn from either side of the blower and blown over the static eliminating bars, provided at the outlet. This results in an ionised air flow that effectively eliminates static over a wide range. Under ideal conditions, the target can be as far as 1000 mm. At closer distances, the Valstat® CS 11 can be used as an anti-static blow off cleaner. Valstat® PS 70 R power sources are designed to provide high voltage AC supply to Valstat® CS 11 static eliminators. They give stable high voltage output even under severe conditions.

• Warranty: 1 Year
• Weight: 2.75 kg
• Model Name/Number: Z207
• Noise Level: 45 dbA (at 1m)
• Dimension: 170 x 90 x 200 mm
• Ionization Voltage: 6-8 KV
• Air Flow: 1.8 cu m/min

• Material: Mild Steel
• Voltage: 220 V
• Brand Name: Bel Mark
• Surface Treatment: Powder Coated
• Frequency: 50 Hz
• Phase: 1 Phase

• Color: Red
• Voltage: Output : 12KV
• Ferequency: 50Hz
• Brand: Excella
• Model Name/Number: E-SE401E
• Weight: 9 Kgcm Approx.
• Power Supply: 1ph
• Size: 190W X 220D X 120H mm(Approx.)

•  : Ion generation method
• Ion balance: IZS31
• Corona discharge type: ±30V (Stainless steel electrode needle : ±100V)

Static neutralization time: 0.3 sec Sensors can be selected from 3 types. Rapid neutralization of static electricity by a feedback sensor. Ion balance control by an auto balance sensor. High precision type: Accurately controls the ion balance of the work position. Body attachment type: Can be used while attached to the ionizer body by detecting the earth return current. The electrode cartridge can be selected according to the application. The high-speed static neutralization type focuses on the speed of static neutralization. Low maintenance type which improves the maintenance cycle.

• Features: Compact size, light weight, portable design with adjustable angle, Stable ion balancing, Adjustable fan speed can generate large range of ion stream, Built-in emitter cleaner for easy cleaning.

The Valstat® BS 11 provides a flow of ionised air which can ideally travel over a distance of 500 mm, thereby eliminating static from a stationary or moving object. Valstat® PS 70 R power sources are designed to provide high voltage AC supply to the Valstat® BS 11 static eliminator. They give stable high voltage output even under severe conditions. Key Features  Valstat® make static eliminator built into the system Powder coated, mild steel construction Weight 6 kg/900 mm effective length; 166 mm W × 105 mm D Air volume of 145 cubic meters per hour per 150 mm Effective Length (EL) Stable HV output, with in-built current limit Shock-less From external Valstat® PS 70 R power source through 2 m HV cable Compact, dust-proof & rugged construction Power consumption of 20 W per 150 mm EL Power supply of 230 V, 50/60 Hz, single phase input to fans through 5 m PVC cable 2 m input cable; built-in fuse and power switch Working distance up to 500 mm, under ideal conditions Mild steel fabricated, powder coated enclosure

• Material: ms , powder coated
• Application: in packaging ind.
• Color: siemens grey
• Country of Origin: dombivli - india
• Model Number: compressed
• Brand Name: s.k.electronics
• Input Voltage: 230V,50Hz
• Output voltage: 6 kV

We are offering static charge eliminator saves on wastages of electricity,man hours, raw material & improves the production & product quality in packaging , textiles, paper industries.prevents operators from shocks & fire hazards in company. Price will start from rs. 15,000=00 per unit.

Leading Manufacturer of Static Charge Eliminator such as High Voltage Static Charge Eliminator and Handheld Static Charge Eliminator from Ahmedabad. Riding on unfathomable volumes of industrial expertise, we are engaged in manufacturing a broad assortment of Handheld Static Charge Eliminator.  Features: * Negligible maintenance* Compact design* Corrosion resistance

Clients can avail from us the latest technology Static Eliminator. We incorporate streamlined production technique to fabricate Static Eliminator. As well, the Static Eliminators are developed by the experts in compliance with the international quality standards. The Static Eliminators can be availed in different specifications from us. We are a prominent name as Static Eliminator Manufacturer, Exporter and Supplier in Uttar Pradesh (India). Highlights Maintenance free bar design for longer lifeInsulated bar cable easy cable routingPower supply grounding provides safe operationMetal BoxMultiple bar connection to a single power supply

Belmark Industries is the name that you can trust upon for all your needs regarding Industrial Static Eliminator. We are counted amongst the most reputed Manufacturers, Exporters & Suppliers of Industrial Static Eliminator. We are offering precision engineered Industrial Static Eliminator that is manufactured as per international standards. We provide market with Industrial Static Eliminator at economical prices with customizable packaging options. More about Industrial Static Eliminator : Our appointed team of experienced engineers exclusively design and develop a qualitative gamut of Industrial Static Eliminator which plays a key role in destroying the static charges which are caused or produced during the operation of a high-speed machine. The eliminators are well fitted with a high voltage generator which has the electric range of approx. 220V 50 Hz AC whereas the output can range from 6 to 7.5 KV with the current flow of 20-25 MA. The Static Eliminator even sucks the dust particle which changes the look of the product. Product Features : Large effect area No maintenance Ready to install Packed in hardboard cartons

Static charge eliminator are available depends upon the width the of the materials and variety of the materials. Power of this machine like 1 kw to 10 kw models are available, Width upto 3 meters models available. This is useful for Cap seal materials (Wads, toffee, chocolate, food packagings etc..)

Static bars, also known as, static eliminators or anti static bars, are a very cost effective way to remove static electricity on a web of material in a plastics, paper, glass, textile, and or film converting applications. All of these static bars are bi-polar ionization generators (produce with both positive and negative ionization) to remove static electricity. A clean static bar is more effective and material with no static is cleaner.