Stop Valve Dealers

• Material: Brass
• Application: Liquid Control
• Color: Metallic
• Feature: Blow-Out-Proof, Casting Approved, Durable, Investment Casting
• Pressure: High Pressure, Low Pressure, Medium Pressure.
• Number Of Way: 2way

• Size: Standard
• Material: PVC, Stainless Steel
• Certification: ISI Certified
• Application: Industrial
• Country of Origin: India
• Type: Automatic
• Pressure: High Pressure
• Power: 12v DC

• Country of Origin: India
• Certification: ISO 9001:2008 Certified
• Condition: New
• Finishing: Coated
• Warranty: 1 Year
• Overall Length: 6-10 Inch, 20-30 Inch
• Diametre (milimetre): 100 To 1000 Mm
• Valve Size: 15 MM TO 250 MM
• Specialities: Non Breakable, Investment Casting, Heat Resistance, Durable, Blow-Out-Proof
• Packaging Type: Wooden Box, Carton, Pallets
• Weight: 5Kg, 10kg, 15kg, 20kg
• Diameter (mm): 50mm, 60mm

This works like a valve is in normally closed position. Air pressure at the pneumatic connection opens the valve. Once the desired weight of the cylinder will be achieved, air will be cut off by virtue of that LPG will be cut off. This valve must be installed in vertical position.

Introduction :  Refrigerants : Applicable to all common non flammable refrigerants including R717 and non corrosive gases/liquids dependent on sealing material compatibility. Standard version : - 46/+150°C Pressure range : Range The valve are designed for max. working pressure 40 bar g (580 psig).   Features The valve Designed to open at a very low differential pressure of 0.04 bar (0.58 psig) Designed with a built-in damping chamber preventing valve flutter, due to low refrigerant velocity and low density Easy to disassemble for inspection and service Internal back seating enables replacement of the spindle seal whilst the valve is active in under pressure Optimal flow characteristics ensuring quick opening to the fully open position.   Housing : Made of special, cold resistant steel. Valve cone : The valve cone can be turned on the spindle, thus there will be no friction between the cone and the seat, when the valve is opened and closed. Spindle : Made of polished stainless steel so that PTFE and Graphite gaskets are not damaged. Sealing : Spindle sealing is done with PTFE and Graphite gaskets assuring 100% sealing.

We are a name synonymous to trust and quality, thus we make every attempt to bring forth only finest product range that is manufactured using premium quality range of products. We are instrumental in offering the products in premium packaging material that is certified by the experts, followed by stern packaging of the products by the professionals.   Key Points : Excellent performance Quick installation Lightweight Superior finish

LGL Series globe steam stop valve are manufactured by lubi valves. Conforming to BS 5152 standards, designed for durability with a cast iron body

• Brand Name: QINN
• Product Name: Bronze Globe Steam Stop Valve(Q-102)
• Model: (Q-102)
• Place Of Origin: Jalandhar
• Condition: Good
• Min. Order Value: 10,000

 Description of Article Size inch.mm.  QINNITEM1/23/411¼1½2152025 324050 BRONZE GLOBE STEAM STOP VALVE (STRAIGHT TYPE)  PRODUCT DETAILS :-  SCREWED BONNET INSIDE SCREW,RISING STEM WITH BACKSEAT ARRANGEMENT HAVING RENEWABLE SEAT & STEM  FLANGED ANSI B 16.1:-  (FLANGES ALSO AVAILABLE AS PER DIN, ISI CLASS 125, 150, 250, 300) PRICES TO BE QUOTED ON DEMAND, UNDRILLED(CAN BE DRILLEDAS PER CUTOMER REQUIREMENT PRICES EXTRA)  END DETAILS :-FLANGED ENDS, BS 10 TABLE 'H'   500 psig (35.15 KG./CM²G) HYD  

  Cast Iron Junction Steam Stop Valve, Right Angle Pattern Product Features   Bolted Bonnet, Outside Screw & Yoke type, Rising stem with back seat, Hand wheel operated, with all Stainless Steel (AISI -410) parts. Flanged ends to : DIN-86251/ BS-5152 RF (PN-16) Body tested to : 370 Psig (26kg/cm² ) Hyd. Suitable for : Steam upto 13kg/cm² Max. Working Temp: 220° C Sizes Available (in inches) 1/2, 3/4, 1, 1.1/4, 1.1/2, 2, 2.1/2, 3, 4   Sizes Available (in mm) 15, 20, 25, 32, 40, 50, 65, 80, 100

• Material: PP-R and Copper
• Color: White, Grey, Green
• Series: SDR6/S2.5
• Pressure Grade: PN2.5

• Type: O/S and Yoke Type
• Pattern: Straight Type / Right Angle / Standard Pattern
• Disc: Renewable Disc
• Operator: Hand Wheel Operated
• Body (MOC): Bronze (Gun Metal) / Forged Brass / Cast Iron
• Pressure Rating: PN-10 / PN-16
• IBR / Non-IBR: IBR & Non-IBR Both Available
• Dimension Standard: BS 5152 (DIN 86251)
• End Connection: Screwed end / Flanged end

Stop valve is any sort of valve type that completely stops the flow of liquid flow through a pipe. Stop valves is mainly used in plumbing or industrial applications to shut off the flow of (hot or cold) water to a plumbing fixture, such as an icemaker, toilet, faucet, dishwasher etc.

• Country of Origin: India
• Size: 1/2inch, 1inch, 3/4inch
• Type: Ci Valves
• Material: Cast Iron
• Certification: ISO 9001:2008 Certified
• Application: Water Fitting
• Color: Green
• Feature: Casting Approved
• Pattern: Marked With Huno
• Pressure: Medium
• Number Of Way: 2way
• Brand Name: HUNO

  Neta Cast Iron Globe Stop Valves for use in industrial and commercial applications. It is made of by best quality material and suitable for many years of use. Neta Metal Works is the best manufacturer and Supplier of all kinds of Industrial Valves & Boiler Mountings. Neta Metal works are one of the leading Valve Manufacturer in India, since 1955.

• Size: 15 to 80 NB
• Type: Straight & angle pattern
• Pressure: 17. 50 kg/cm�
• Body: Bronze
• Temperature: 200� c
• Ends: Screwed, flanged end

World's Largest Global Steel & Engineering Valve Factory is a India-leading manufacturer of industrial Bronze Steam Stop Valves, offers with High Durability at Special Prices. Mainly Supply Bronze Steam Stop Valves, Learn more about our Bronze Steam Stop Valves for general-industry & Find Information On Multi Range Industrial Bronze Steam Stop Valves.

• Type: Normally open, normally closed
• Valve housing, Cover: cast iron
• Max working pressure: 30 kgf/cm2
• Operating Temp Range: -20⁰ c to 205⁰c
• Port size: 1”, 1.5”, 2” BSP/BSPT/NPT
• Pilot port size: 1/4” BSP/BSPT, NPT
• Nominal bore: 25, 32, and 50

Ryder Oil Stop Valve is used in the Screw Compressor to stop the oil flow from the receiver to the Screw Compressor. The normally closed type oil stop valve is controlled by the pressure difference between the discharge pressure and the oil- injection pressure. It will close the oil line on stopping the compressor and re-open on starting the compressor. The normally open type oil stop valve is controlled by the pressure difference between the discharge pressure and the pressure in the oil receiver. Cover: Aluminium Guide Bush: Brass Piston: Aluminium Plug, Poppet, Seat Poppet, Rod Actuator: Steel (Corrosive Resistant)   Specifications :