Vertical Dewatering Pump
15,000 Per Piece
1 Piece (MOQ)
FEATURES Vertical, Monobloc Submersible Pumpset.Free Flow Impellers Of Two Sizes. 1 Phase And 3 Phase Motors With Ip 68 Protection, Class 'F’ Insulation. 1 Phase Motor With Built-In Thermal Overload Protection And Float Switch. Bi-Directional Mechanical Seal. Easy And Less Maintenance Due To Ss Hardwares. APPLICATIONS Pumping Of Surface Water, Rain Water, Waste Water Containing Solids. Drainage Of Sumps Liable To Flooding. Drainage Of Basements, Underground Bunkers, Cable Trenches In Industries, Hotels Etc. Municipal Pits. Construction Sites.
Mini Openwell Submersible Pump
3,000 Per Piece
5 Piece(s) (MOQ)
Best Deals from Submersible Pumps
Marine Dewatering Pump
6,227,550 Per Piece
1 Piece (MOQ)
Vertical Sump Pumps
Get Price Quote
1 Set(s) (MOQ)
LEAKLESS Manufacturer Vertical Submerged Pumps In CF8M for leak free performance where leakage is not allowed. No mechanical seals or glands , So no breakdown of pump. Operating Range For VERTICAL SUBMERGED PUMP Sump Depth Up to 4.5 Mtr Capacity Up to 100 m3Hr Head Up to 100 Meters Speed 1450 to 2850 RPM Pump Size-DN 19mm To 150mm Temp Up to -20° C - +150° C
Vertical Turbine Borehole Pump
Get Price Quote
100 Set(s) (MOQ)
Vertical Turbine Borehole Pumps : High Efficiency Easy to Install and Dismantle Minimum Maintenance Costs-no Attention Required Whilst Pump is Running Driving Power Requirements are Reduced to a Minimum All Parts are Replaceable The Discharge Head The Sefex drive and discharge head is made from high grade cast iron and it is mounted at the top of the borehole or well. The head carries all the column pipes which are linked through the head to its horizontal discharge outlet. Inside the discharge head a generous area is provided to allow easy flow of water - this also helps to reduce friction losses to a minimum. The head shaft passes through the whole depth of the head and is connected to the line shafting which transmits the rotary drive to the impellers. Lubrication of the bearings in the discharge head is effected by periodical injection of grease or circulation of oil. The stuffing box is conveniently located in the head and is easily accessible for servicing. Adjustments to the impeller are made by means of a regulating nut on top of the head. A non reversible type pulley is fitted dowels block any reversal motion as soon as the pump stops rotation a clockwise direction. The construction of the head allows various alternative drives to be used directly coupled, flat or V-belt, and right angle gear type using flexible shaft or pulley Pulley Adjusting nut Boaring housing assembly Head frame Lock nut Head shaft Top bearing Bearing Spindle Bottom bearing Stuffing cover Stuffing Priming Funnel The Column Stage Each stage includes : One part with two forged and machined flanges welded on each end. The pipe is of standard length (2.5 m or 3m according to customers Requirement) A top quality stainless steel transmission shaft, ground and polished and tested for perfect straightness so that it ensures minimum vibration and longer bearing life. The shafts are connected by couplings. A spider bearing assembly provided with a special water lubricated rubber center bearing is bolted between the pipe flanges at intervals (2.5 m or 3 m according to the column length) to ensure accurate concentricity and alignment of the line shaft. These bearings are primed by means of the funnel mounted on the discharge head. Priming is only necessary when the pump has been standing idle. Top column flange Spider bearing Column shaft Column Pipe Coupling Rubber bearing The bowl assembly This section, the HEART of the pump, is of the multi-cellular type and is always submerged below water level. Of a very practical design, it is especially suitable for narrow wells and boreholes. The helico-centricugal type impellers are made of high grade cast iron and balanced. They are built up on an extra strong stainless steel shaft and securely locked in position by a double cone tightening systems. A water lubricated rubber bearing is fitted into each of the bowls between the impellers - these bearings also act as stabiliser guides for the shaft. The curve of the bowl diffusers is designer to allow water to flow freely through the bowl stages without turbulence - this reduces friction loss to a minimum and gives the maximum output. Top bowl Taper impeller cone Intermediary bowls Suction manifold Strainer Lock nut Bowl rubber bearings Impellers Footvalve assembly Typical applications available: Semi-crossed, flat belt driven Pump- by mens of a slow speed vertical Diesel engine. V-belt driven Pump - powered by an electric motorl Both motor and pump are mounted on a fabricated steel base. Pump fitted with right angle gear drive - powered by a multi-cylinder medium speed Diesel engine. Alternatively it could be driven by an electric motor. A further semi-crossed, flat belt driven Pump operating on an open well-driven by a slow speed horizontal Diesel engine. (A semi-crossed V-belt could replace the flat belt).
Horizontal Monoset Submersible Pumps
Get Price Quote
Our Horizontal Monoset Submersible Pumps have the maximum capacity up to 5000 LPM. The power capacity of these pumps is up to 30 HP and discharge of 400 LPM to 4000 LPM.
Submersible pumps
Get Price Quote
We are offering KSB submersible pumps - Movi Tech VCF. Construction & application: * multi-stage, vertical inline high-pressure centrifugal pumps in ring-section design * suitable for general water supply, sprinkling, irrigation and pressure boosting systems, warn water, hot water and colling water re-circulation, boiler feed systems, domestic water supply systems and washing plants.
Ksb submersible pump
Get Price Quote
1 Piece (MOQ)
Construction : Submersible pump in multi-stage construction with radial or mixed flow impellers coupled with oil or water filled, Single/three phase submersible motors. Pumps with SS jacket are also available up to 100 mm diameter.
SPSL156S 15 HP Submersible Slurry Pump
48,500 - 525,000 Per piece
1 Piece (MOQ)
multistage submersible pumps
Get Price Quote
Design Submersible pump in multi stage construction with radial or mixed flow impellers coupled with oil or water filled, single/three phase submersible motors. Pumps with ss jacket are also available up to 100 mm diameterApplicationsSuitable for horticulture, irrigation, housing, building services and farm houses, ornamental fountains etc
Super-312 3 Inch Borewell Submersible Motor Pump
11,400 - 12,400 Per piece
24 piece (MOQ)
0.0
Website
Submersible Water Pump
Get Price Quote
350 Piece (MOQ)
Dewatering Mud Pumps
80,000 - 99,000 Per Piece
1 Piece (MOQ)
Littelpump MSP 610 Desert Cooler Pump
Get Price Quote
50 Piece (MOQ)
Single Phase Open Well Submersible Water Pump
2,500 - 9,000 Per Piece
Seaflo Submersible Bilge Pump 1100gph 12v / 24v
1,100 - 1,101 Per Piece
1 Piece (MOQ)
submersible bilge pump 1100gph 12v for marine boat yacht vessel ship
V6 Borewell Submersible Pump
Get Price Quote
1 Piece (MOQ)
Other information : High grade cast iron bearing housing and pump casing Gun metal impellers and bushes for long life Stainless steel couplings, bolts and nuts Carbon thrust bearing for low voltage and quick start Wet type winding wire APPLICATION : Installation inside borewells above 6″ For lift irrigation system Drip and springler irrigation Industrial and multi – storied buildings Booster pumps for long distance water lifting
Submersible pumps
Get Price Quote
0.0
Website
Openwell Submersible Pump
Get Price Quote
Powerpoint openwell submersible pumps are built meticulously with good engineering to meet the growing demand of our customer, compact in size, easy to install and ensured trouble free operation. APPLICATION : - 1) Fountains 2) Openwell & sump 3) House & Apartments 4) Hotel& Water Distribution System 5) River & Canal lift irrigation 6) Sprinklers & Drip irrigation 7) De-watering Purpose
Openwell Submersible Pump
Get Price Quote
1 Piece (MOQ)
5 HP Submersible Pump
Get Price Quote
10 piece (MOQ)
Submersible dewatering
Get Price Quote
Submersible dewatering Application Dewatering from residential buildings Commercial buildings Industry Hospitals Special features / product benefits Stationary and portable Technical data Flow: upto 1000 LPM Head: upto 30 mts Solid passage: upto 16 mm
0.0
View Profile
sump pump
14,500 Per Piece
1 Piece (MOQ)
V4 Submersible Pump
20,000 - 80,000 Per Piece
1 Piece (MOQ)
Jabsco Rule Submersible Bilge Pump 3700 GPH 24V - 16A / 12V - 14A
9,500 - 9,501 Per Piece
1 Piece (MOQ)
Jabsco Submersible bilge pump 3700gph 24v / 12v Model 16A / 14A · Connections: For 38mm (1.5") bore hose.· Dimensions: 180mm high, 135mm base diameter.· Output: Up to 220 litres/minute (48 gallons/minute).Max. recommended discharge head 4m.· High capacity pump for larger yachts and motor cruisers.· Tough plastic body.· Quick release inlet strainer allows rapid cleaning.· Motor rated for 2500-hour life.· Ignition protected.· For automatic operation use Rule Float Switches37A, 40A.· Packaged Dimensions: L:19.00 x H:28.00 x W:16.00cm· Actual Weight: 2.72 Kg (Approx. 3.22 Kg packed)
Comet Portable Pumpset
Get Price Quote
1 Piece (MOQ)
Details : Type : Vertical, totally enclosed, water cooled, single cylinder, four stroke cycle, compression ignition, cold starting diesel engine. Engine Combustion : Direct fuel injection in open type combustion chamber provided in an aluminium piston crown in combination with long stem multihole nozzle; result in low fuel consumption and easy starting. Grankshaft : Designed with integrated balance weight and is fitted with taper roller bearings for long life & with provision of taper degree for flywheel fitment. Cylinder head : High grade cast iron with smooth air & exhaust ports, clear water jackets for perfect cooling. Cylinder Liner : Special grade high wear resistant cast iron. Fuel System : High speed diesel oil is supplied to the fuel pump by gravity feed through wiremesh filter in tank and efficient paper type element filter before pump. There is one more filter (inbuilt) in injector inlet. Lubrications : Force feed lubrications by plunger type pump incorporating full flow filter, to large end bearing. Main bearings, being taper roller type need no separate supply. Olher moving parls are splash lubricated. Cooling : Engine cooling can be arranged by run through water system or cooling tank. Starting : Engine is designed for starting by hand cranking with the help of starting handle. Rotation : Standard rotation is clockwise when looking at the flywheel end. Drive : Standard power take off if from flywheel side at full speed. lt can be provided from gear end at half speed. ExhaustSystem : A silencer of standard type (Peeper pot) is fitted for adequate silencing. Air Cleaner : Oil bath type, large capacity for efficient filtration. Lub oil : SAE - 30-40 or equivalent grade. Standard accessories : Air cleaner, exhaust silencer, staffng handle, set of spanners and screw driver. Optional : To avoid over loading, provision for head adjustment by variable speed drive.
Vacuum Dewatering Pump
100,000 Per Piece
1 Piece (MOQ)
Being a trustworthy name in the industry, we are able to offer a superior quality array of Vacuum Dewatering Pump to our patrons.
0.0
Website
V-7 Openwell SS Body
7,100 - 8,200 Per Barrel
2 Barrel (MOQ)
V-7 Openwell SS Body V-7 2 hp Single Phase SS Body V-7 3 hp Single Phase SS Body V-7 3 hp Three Phase SS Body V-7 5 hp Three Phase SS Body
Borewell Submersible Pump
Get Price Quote
1 Piece (MOQ)
Three Phase Submersible Solar Water Pump
48,000 Per Piece
Post Free Ad
