Supercritical Fluid Extractor Dealers

• Brand Name: SUNDEX
• Installation Services: Yes
• Specification : The process of separating one component (the extraction) from another (the matrix) using supercritical fluids as the extracting solvent,Extraction is usually from a solid matrix, but can also be from liquids,SFE can be used as a sample preparation step fo

• Type: Super Critical Herbal Extraction Plant
• Condition: Excellent
• Power: 63 KW
• Brand Name: Flavex
• Application: Cumulative 3 Years
• After-Sales Service Provided: Yes
• Place of Origin: Pune

Super critical extraction plant based on german technology with 165 lit x 2 extractor based system along with liquid extractor or without the same, is available complete with co2 circulation pump & circulation system, co2 recovery & recycle system for sale. Design pressure 380 bar at 90 c for extraction side & 80 bar 50 c for low pressure co2 side. Utility side 3 bar. Material in contact with co2 ss304 & utility side cs the salient features are 1. quick opening single bolt based extractor 2. both end opening of the extractor makes it easy to remove sticky, lumpy material 3. high height to diameter ratio of extractor increases the extraction efficiency. 4. extractor closure rings designed to withstand the pressure rating 5. quick opening separator facilitates flushing of the separator during product change with lowest time. 6. lowest fuel cost for extraction 7. high co2 recovery & recycle used small plant of 4 lit x 1 no extractor based package is also available at extra price for the buyer of this used plant

• Size: 100ml to 1000L
• Type: Extraction with Supercritical CO2
• Brand Name: Amar
• Material: SS316
• Application: Extraction of natural products such as spice oil & oleoresins, flavors and fragrances.

Salient Features Supercritical fluid extraction systems with pressures upto 700 bar for lab scale units & upto 450 bar for commercial plants Semi or fully automated PLC based plants with CO2 recycling PED, U stamp, CE, CSA, UL certification optional Customizable designs as per client requirements World-class technology for natural products There is a tremendous demand for high purity & residual solvent free extracts of natural products. Also there is increasing requirement of eco-friendly manufacturing processes for the extraction of natural products Supercritical fluid extraction technology provides an economical solution toproviding a safe & eco-friendly way for extraction of natural products. Its superiority over the conventional technologies of extraction, especially for natural products in the food and pharmaceutical industry is well recognized Supercritical CO2 textile dyeing is an emerging innovative waterless technology for dyeing of textile fabrics that will revive the textile industries Commercial Applications of SCFE extractor systems Extraction of natural products such as spice oil & oleoresins, flavors, fragrances, colors Decaffeination of tea & coffee Production of uniform &ultra fine particles Supercritical CO2 (SCO2) textile dyeing of fabrics Supercritical CO2 (SCO2) cleaning of high precision metal components Drying of aerogels Advantages of SCFE system Extract with delicacy & freshness close to natural High potency of active components Longer shelf life extracts Eco-friendly & green technology with no residual solvent & effluents High flexibility of process conditions Simultaneous fractionation of extracts High yields compared to solvent extracted products Low batch times for extraction Recycling of CO2 Low operating cost Advantage of CO2 as a solvent Carbon dioxide is generally regarded as safe (GRAS) for food products Inexpensive & easily available Non-toxic, non-flammable and inert to most materials Process description for lab-scale plants The Carbon dioxide gas from the cylinder is first liquefied & then pressurized above the critical pressure of CO2 (73.8 bar) to the required pressure necessary for extraction. This high pressure liquid CO2 is then heated above the critical temperature of CO2 (31 °C) to the required temperature. CO2 which is now in supercritical phase (SCCO2) enters the extractor where the raw material is fed in powder form & the extraction is achieved on the basis of solubility. The compounds dissolved in SCCO2 finally come to the separator at atmospheric pressure & get precipitated. CO2 leaving the separator is then measured by passing it through a CO gas flow meter. Process description for commercial scale plant The raw material in powder form is fed to the extractor. The liquid carbondioxide from the CO2 tank is precooled by passing it through the precooler. This precooled liquid carbon dioxide is then pressurized by means of a positive displacement plunger pump to a pressure above the critical pressure of CO2 (i.e. 73.8 bar). High pressure liquid CO2 is then heated above the critical temperature of CO2 (i.e 31 °C) by passing it through preheater. CO2 which is now in the supercritical state enters the extractor in which the raw material is loaded. The SCCO2 dissolves substances on the basis of solubility, depending on operating conditions. The SCCO2 with soluble extracts enters the separators where the pressure & temperature are reduced sequentially so that solubility decreases & extract precipitates in the separators. Finally the clean CO2 without any traces is recycled back to the CO2 tank via condenser.

• Brand Name: Chemtron Make

A green technology to extract absolutes with the help of supercritical CO2 as a solvent instead of conventional solvent extraction and steam distillation which take up a lot of energy and time for extractions. This SCFE is faster and greener. You get pure extracts free from pesticides, impurities, free from solvent even in ppb levels. Go for the Green Technology of the Future.

Some of the features of supercritical fluid extraction supercritical fluid extraction (sfe) system uses supercritical carbondioxide (co2) as solvent instead of any organic solvent. 100 ml to 5 ltrs. Volume pressures upto 350 bar & temperatures upto 200°c available in material of constructions (moc) ss-316

• Country of Origin: Made in India
• Capacity: As Per Requirement
• Installation Services: Yes
• Brand Name: ASPL Make

• Salient Features: Pressures upto 700 bar for lab scale units & upto 450 bar for commercial plants,Semi or fully automated PLC based plants with CO2 recycling,PED, U stamp, CE, CSA, UL certification optional,Customizable designs as per client requirements
• Advantages of SCFE: Extract with delicacy & freshness close to natural,High potency of active components,Longer shelf life extracts,Eco-friendly & green technology with no residual solvent & effluents,High flexibility of process conditions,Simultaneous fractionation of extra

• Phase: Three Phase
• Voltage: 440 V
• Frequency: 50-60 Hz
• Power Source: Electric
• Material: Mild Steel
• Specification : Waters' Supercritical Fluid Extraction (SFE) systems extract chemical compounds,using supercritical fluid instead of an organic solvent. The result is an extract with,little or no residual solvent, superior purity and yield, and lower operating costs,comp

• Power Source: Electric
• Voltage: 220-440V
• Frequency: 50-60Hz
• Automation Grade: Automatic
• Phase: 3 Phase
• Material: SS 316

• Application: Extraction & Analysis of Essential Oils
• Payment Terms: T/T (Bank Transfer)
• Capacity: 0.5 litre to 5000 litre
• Installation Services: Yes
• Condition: New
• Use: Industrial
• Oleo Resin: Ginger Turmeric Nutmeg Clove Vanilla
• Nano Particles deposition on Cloth: Textile Dyeing
• Non Polar Organic Extraction: Mineral and Metals deposiiton
• Solvent Gas: CO2
• Plant Inclusion: Extractor,Separator, Gas Hold-Up Tank, Heat Exchangers

Supercritical fluid extraction is a flexible dynamic technology that enable us to tailor products to customer demands without excessive cost. Ideal process for Extraction of Essential oils from flowers, herbs and spices. Extraction of food flavors from herbs and spices. Medicinal extracts for health food and pharmaceutical industries. Hop extraction for beer production. Removal of natural pesticides (pyrethrins). Extraction of Natural food coloring, antioxidants, and vitamin

• Specification : The process of separating one component (the extraction) from another (the matrix) using supercritical fluids as the extracting solvent,Extraction is usually from a solid matrix, but can also be from liquids,SFE can be used as a sample preparation step fo

• Type: Fruit Extract
• Temperature: 0degC-75degC
• Volume: 1 extractor, 380 bar
• The operation temperature scope:  room temperature
• Designed pressure of extractor:  50Mpa
• The max working pressure of extractor:  40Mpa
• The volume of extractor:  Standard and customised capacity
• The power volt:  customized (Ac),The system has one extractor and two separators.
• Specifications: This system is multi-function SCFE equipment, the working mode is intermittent or continuous way to extract solvent from solid or liquid material, the additive can be add to the supercritical fluid,The system has one extractor and two separators The de

Supercritical Fluid Extraction, shaker hydrogenator

Supercritical Fluid Extractor, waste heat recovery systems

Supercritical Fluid Extractor

Supercritical Fluid Extraction Plant, Fenugreek Seed Oil