Surface Finish Tester Dealers

• Microsurf 10 Surface Roughness Tester Microsurf 10: 56000

Microsurf 10 surface roughness tester microsurf 10+10% ra 0.05-10.00um1.000-400.0uinch rz 0.020-100um0.780-4000uinch large backlight lcd display : 4 digits, 10 mm lcd, with backlight display range ra: 0.05-10.00um1.000-400.ouinch rz: 0020-100.0um0.780-4000uinch sensor : test principle: inductance type radius of probe pin: 10um material of probe pin: diamond measurement force of probe: 16mn(1.6gf) probe angle: 90o vertical radius of guiding head: 48mm maximum driving stroke: 17.5mm0.7inch cut off length (i): 0.25mm 0.8mm 12.5mm optional evaluation length: 1~5 cutoff optional.

• Type: Surface Finish Tester
• Application: Industrial, Measuring Of Surface Roughness
• Feature: Easy To Use
• Condition: Good
• Automatic Grade: Automatic, Fully Automatic, Semi Automatic
• Warranty: 1year

We offer Portable Surface Roughness Tester from Zeiss-TSK, packed with powerful functions for convenient operations.   All Functions for convenient Operations Complies with major International standards such as ISO, DIN, CNOMO, JIS, ASME. Data Memory/Battery Operation - Ten complete Data records can be stored.Rechargeable battery operation provides versatile usof the line independent of the line supply. Measuring in different positions - The small and light handysurf measures not only flat,horizontal,but also vertical and overhead surfaces. Direct data Transfer to the PC- The RS 232 serial interface is used to transfer measured data,parameters and profile curves directly to the PC.   Specifications Measuring Range - Z axis /- 160 um, X Axis 12.5 mm Resolution  - 0.01 um Standards - JIS 2001, JIS-1994,JIS 1982,ISO-1984,DIN-1990,ASME-1995,CNOMO Parameters - Pt, Ra, Rq, Rz, Rzmax, Rp, Rt, R3z, RSm, Pc, Rk, Rpk, Rvk, Mr1, Mr2, VO, K, Rmr, R, Rx, AR, W, Wx, AW, Wte Evaluation Curves - Section Profile Curve,Roughness Curve,ISO 13565   Additional Information: Item Code - Handysurf_E35

• Features: Easy and accurate clamping, Maximum service ability, Shear strength

• Type: Surface Roughness Tester
• Application: Measuring Of Surface Roughness
• Color: White
• Feature: Easy To Use
• Condition: Good
• Power Source: Battery
• Warranty: 1year

Portable Surface Roughness Tester Surftest SJ-210s 2.4” color LCD display inclass Display direction can be changed to be read vertically or horizontally right and left -handed s Color tolerance judgments, evaluation curves and all data can be displayed in one of 16 languagess Self-timed measurement supported s Security management supports password protected function locks the new Surftest® SJ-210 portable surface roughness tester comudes backlighting and over-size finds high accuracy and measurement speed with numerous innovative features creating a new class leader in surface inspection.  

• Feature: Easy to use
• Use: Measurement

Special Features : Applicable in production site, laboratory and workshop in factory Easy operation menu and large LCD display The sensor sliding along the surface by driving the mechanism Highly sophisticated inductance sensor The exclusive DSP processes to outputs the measurement results on LCD Manual or automatic shut down Circuit with high capacity Small in size, light in weight and easy to use Can communicate with PC computer for statistics Compatible with four standards, ISO, DIN, ANSI and JIS

Along with a spacious warehouse, our efficient Warehouse Management System helps us in keeping a track of all the products. We stringently maintain inventory by recording warehouse transactions and delivery of goods. We are strategically based in Rajkot(India) and are in proximity with the resources required for easy production process.   Details : Save up to 5 measurement condition and 30 measurement result into internal memory of Surfcom FLEX. Additionally USB memory can be connected in Surfcom FLEX to save more data. (USB memory in picture is optional) Mini USB connector is equipped with Surfcom FLEX and able to connect with PC. The data can be sent to PC and various analysis is available with ACCTee software.

Product Description Our offered product Surface Roughness Tester, when measure roughness of surface, then pickup is placed on the surface of the part and then tracing the surface at constant rate. The pickup acquires the surface roughness by the sharp stylus in pickup. The roughness causes displacement of pickup which results in change of inductive value of induction coils thus generate analogue signal which is in proportion to surface roughness at output end of phase-sensitive rectifier. This signal enters data collection system after amplification and level conversion. After that, those collected data are processed with digital filtering and parameter calculation by DSP chip and the measuring result can be read on LCD, printed through printer and communicated with PC. Features: High accuracy inductance pickup Four filtering methods of RC, PC-RC, GAUSS and D-P Compatible with four standards of ISO, DIN, ANSI and JIS Can store 15 sets of measurements results 128×64 dot matrix LCD displays all parameters and graphs DSP chip is used to control and process data with high speed and low power consumption Built-in lithium ion chargeable battery and control circuit have high capacity, without memory effect. Consecutive work time is longer than 20 hours Design of mechanical and electrical integration is adopted to achieve small bulk, light weight and easy usage Can be connected to printer to print all parameters and graphs Built-in standard RS232 interface enables communication with PC Automatic switch off, memory and various prompt instructions Optional printer, analysis software and measurement platform

• Brand Name: YAMAYO BLISS
• Roughness Parameters: Ra,Rz,RY,Rq,Rt,Rp,Rmax,Rv,R3z,RS,RSk,Rmr Primary profile

We are the manufacturers and supplier of this products.

• Application: Industrial
• Feature: Easy To Use, Electrical Porcelain, Four Times Stronger
• Frequency: 45Hz
• Automatic Grade: Automatic
• Power Source: Electric
• Operating Current: Single Phase
• Brand Name: Aerowheel Surface Finishing

The IPX-103/104 is a portable, battery-powered instrument for checking surface roughness, with the measured values displayed on a digital readout display. The instrument can be used in laboratory, inspection area, workshop, or wherever on-site surface roughness testing is required Features: Pocket-sized and economically priced! External and internal finish testing with swivable tracer Ra and Rz parameters in one instrument and all available after each individual test Standard 9V battery Three cut-off 0.25mm, 0.8mm and 2.5mm, adjustable to 1-3-5 times Piëzo-electric pick-up stylus for external surfaces with diamond tip of 2 micron according to the latest ISO standards IPX-104 with data output

Surftest sj-210- series 178-portable surface roughness testerseries 178features the 2.4-inch color graphic lcd provides excellent readability and an intuitive display that is easy to negotiate. The lcd also includes a backlight for improved visibility in dark environments. The surftest sj-210 can be operated easily using the buttons on the front of the unit and under the sliding cover. Up to 10 measurement conditions and one measured profile can be stored in the internal memory. An optional memory card can be used as an extended memory to store large quantities of measured profiles and conditions. Access to each feature can be password-protected, which prevents unintended operations and allows you to protect your settings. The display interface supports 16 languages, which can be freely switched. An alarm warns you when the cumulative measurement distance exceeds a preset limit. The surftest sj-210 complies with the following standards: jis (jis-b0601-2001, jis-b0601-1994, jis b0601-1982), vda, iso- 1997, and ansi. In addition to calculation results, the surftest sj-210 can display sectional calculation results and assessed profiles, load curves, and amplitude distribution curves.