Surface Testers Dealers

• Features: Easy and accurate clamping, Maximum service ability, Shear strength

Digital Surface Roughness Tester is compatible with four standards of ISO, DIN, ANSI and JIS and is widely used in production site to measure surface roughness of various machinery-processed parts, calculate corresponding parameters according to selected measuring conditions and clearly display all measurement parameters. FEATURESThis instrument is compatible with four standards of ISO, DIN, ANSI and JIS and is widely used in production site to measure surface roughness of various machinery-processed parts, calculate corresponding parameters according to selected measuring conditions and clearly display all measurement parameters.When measuring the roughness of a surface, the sensor is placed on the surface and then uniformly slides along the surface by driving the mechanisminside the tester. The sensor gets the surface roughness by the sharp built-in probe. This roughness causes displacement of the probe which results in change of inductive amount of induction coils so as to generate analogue signal, which is in proportion to the surface roughness at output end of phase-sensitive rectifier. The exclusive DSP processes and calculates and then outputs the measurement results on LCD.* Very easy to operate   * Multiple parameter measurement: Ra, Rz * Highly sophisticated inductance sensor * Built-in lithium ion rechargeable battery and control circuit with high capacity * Small in size, light in weight and easy to use * Can communicate with PC computer for statistics, printing and analysing by the optional cable and the software for RS232C interface. *Manual or automatic shut down. The tester can be switched off  by pressing  the Power key at any time. On the other hand, the tester will power itself off about 5 minutes after the last  key operation.   SPECIFICATIONS:-   Display： 4 digits, 10 mm LCD, with blue backlight Parameters:  Ra, Rz Display  Range: Ra:   0.05-10.00um/1.000-400.0uinch Rz:   0.020-100.0um/0.780-4000uinch Accuracy: Not more than 10% Fluctuation of display value: Not more than 6% Sensor : Test Principle: Inductance type Radius of Probe Pin: 10um Material of Probe Pin: Diamond Measurement Force of Probe: 16mN(1.6gf) Probe Angle: 90° Vertical Radius of Guiding Head: 48mm Maximum driving stroke:  17.5mm/0.7inch Cutoff length (l): 0.25mm / 0.8mm / 2.5mm  optional Evaluation length:  1~5 cut off  optional Driving speed: sampling length = 0.25mm   Vt=0.135mm/s sampling length = 0.8mm    Vt=0.5mm/s sampling length = 2.5mm    Vt=1mm/s returning                                Vt=1mm/s Resolution : 0.001μm    if reading ＜10μm 0.01μm    if 10μm≤reading＜100μm 0.1μm    if reading ≥100μm Power Li-ion battery: rechargeable Operating conditions:  Temp. 0-50℃ Humidity

Surftest sj-210- series 178-portable surface roughness testerseries 178features the 2.4-inch color graphic lcd provides excellent readability and an intuitive display that is easy to negotiate. The lcd also includes a backlight for improved visibility in dark environments. The surftest sj-210 can be operated easily using the buttons on the front of the unit and under the sliding cover. Up to 10 measurement conditions and one measured profile can be stored in the internal memory. An optional memory card can be used as an extended memory to store large quantities of measured profiles and conditions. Access to each feature can be password-protected, which prevents unintended operations and allows you to protect your settings. The display interface supports 16 languages, which can be freely switched. An alarm warns you when the cumulative measurement distance exceeds a preset limit. The surftest sj-210 complies with the following standards: jis (jis-b0601-2001, jis-b0601-1994, jis b0601-1982), vda, iso- 1997, and ansi. In addition to calculation results, the surftest sj-210 can display sectional calculation results and assessed profiles, load curves, and amplitude distribution curves.

MICROSURF 10: Ra 0.05-10.00um/1.000-400.0uinch, Rz 0.020-100um/0.780-4000uinch. HandySurf: Ra 0.05-10.00um/1.000-400.0uinch, Rz 0.020-100um/0.780-4000uinch.

The IPX-103/104 is a portable, battery-powered instrument for checking surface roughness, with the measured values displayed on a digital readout display. The instrument can be used in laboratory, inspection area, workshop, or wherever on-site surface roughness testing is required Features: Pocket-sized and economically priced! External and internal finish testing with swivable tracer Ra and Rz parameters in one instrument and all available after each individual test Standard 9V battery Three cut-off 0.25mm, 0.8mm and 2.5mm, adjustable to 1-3-5 times Piëzo-electric pick-up stylus for external surfaces with diamond tip of 2 micron according to the latest ISO standards IPX-104 with data output

• Power Source: Electric
• Warranty: 1year
• Measuring Range: Z axis /- 160 um, X Axis 12.5 mm
• Resolution: 0.01 um
• Standards: JIS 2001, JIS-1994,JIS 1982,ISO-1984,DIN-1990,ASME-1995,CNOMO
• Parameters: Pt, Ra, Rq, Rz, Rzmax, Rp, Rt, R3z, RSm, Pc, Rk, Rpk, Rvk, Mr1, Mr2, VO, K, Rmr, R, Rx, AR, W, Wx
• Evaluation Curves: Section Profile Curve, Roughness Curve, ISO 13565

All Functions for convenient Operations : Complies with major International standards such as ISO, DIN, CNOMO, JIS, ASME Data Memory/Battery Operation: Ten complete Data records can be stored.Rechargeable battery operation provides versatile usof the line independent of the line supply. Measuring in different positions: The small and light handysurf measures not only flat,horizontal,but also vertical and overhead surfaces. Direct data Transfer to the PC- The RS 232 serial interface is used to transfer measured data,parameters and profile curves directly to the PC.

• SURFTEST: VERNIER
• MITUTOYO: MICROMETER
• GAUGES: METER
• Brand Name: MITUTOYO JAPAN

We are offering mitutoyo digital surface roughness tester-sj-210 latest model. A]=mitutoyo, tesa, mahr == verniers, micrometers and measuring instruments. b]=bakerhipgriphicathruethreads make==tread,plug,ring,snap gauges c]=jafuji, luthra, crystal ==surface plates, bench centers , magnetic v blocks d]=lutron fluke time make=.digital sound-noise meters vibration-meters anemometers luxmeters thermometers coating thickness gauges hardness testers etc.meters e]=kristeel shinwa make.= steel rules scales and gauges f]=britool-tohnichi dial torque wrenches. g]=yuyutsu-aa, elcometer electrophizics==digital- dft coating meters

• Type: Tension Device
• Application: Industrial Use
• Weight: 100gm
• Color: Black
• Condition: New
• Driven Type: Manual
• Country of Origin: India

Treetment Checking pen  And surface tension tester

• Type: Surface Finish Tester
• Application: Industrial, Measuring Of Surface Roughness
• Feature: Easy To Use
• Condition: Good
• Automatic Grade: Automatic, Fully Automatic, Semi Automatic
• Warranty: 1year

• Color: Yellow
• Measuring Principle: RA, RZ
• Brand Name: Metrix
• Model: TIME3100
• Roughness parameter: Ra, Rz
• Tracing length: 6mm

• Color: White
• Material: Mild Steel
• Usage/Application: Industrial
• Packaging Type: Box
• Display Type: Digital
• Brand Name: METLAB

Along with a spacious warehouse, our efficient Warehouse Management System helps us in keeping a track of all the products. We stringently maintain inventory by recording warehouse transactions and delivery of goods. We are strategically based in Rajkot(India) and are in proximity with the resources required for easy production process.   Details : Save up to 5 measurement condition and 30 measurement result into internal memory of Surfcom FLEX. Additionally USB memory can be connected in Surfcom FLEX to save more data. (USB memory in picture is optional) Mini USB connector is equipped with Surfcom FLEX and able to connect with PC. The data can be sent to PC and various analysis is available with ACCTee software.