Surge Tester Dealers

• Display Type: Large LCD display with back-light
• Power supply: 12V 
• input voltage: 230 V AC 
• Frequency : 70 - 2500Hz

• Display Type: LCD display
• Voltage: 230 V +/- 10 % 50 Hz +/- 4 %
• Weight: 25 kg approx

Occurrence of cable fault can not be avoided due to many factors. Long outage of a cable from service results in heavy loss of revenue to the power distribution company, production loss to industries as well as unpleasant condition to general public. This requires an efficient instrument capable of locating the fault in minimum possible time and restoring the supply. SWT 4 is a powerful instrument to pre-locate the fault distance and exactly locate the fault point in a short time. It offers 500J or 1000J energy on 2 and 4 KV ranges that allows its use on LT networks effectively.

• Country of Origin: Made in India
• Display Type: Digital
• Weight: 15 Kg
• Voltage: 230 volts
• Automation Grade: Manual

• Condition: New
• Application: Industrial Use
• Feature: Digital Display Of Voltage And Deviation With Digital Limit Selection,Tests Solenoids,Chokes,Transformers,Stators And Other Wound Products,Detects Shorted Turns As Well As Opens And Grounds.

• Voltage: 230V +- 10%
• Country of Origin: Made in India
• Surge Frequency: 50Hz +- 3%
• Temperature: Standard
• Weight: 40Kg
• Brand Name: SIVA
• Dimension: 550mm X 550mm X 550mm

• Automation Grade: Automatic
• Voltage: 230 V
• Weight: 45kg
• Model No: VMS1001
• USB Interface: USB Interface with PC for waveform storage
• Phase: Three Phase
• Surge Waveform Display: LCD Display
• Phase Selector: Included
• Usage / Application: High KW DC Motors,1or3 Phase motors etc, heavy duty coils etc
• Max surge current (amp): 660 A
• Surge Energy: 5 Joules
• Pulse Current: 400 Amp
• Supply Voltage: 230 V +- 10 %, 50 Hz +- 4 %
• Power: 10KV
• Output KV: 10KV
• Test Voltage: 0-6KV
• Surge Voltage: 0-6000V

the surge comparison tester checks the strength of ground insulation that consists of enameled insulation. It detects the insulation failures such as turn-to-turn shorts, layer-to-layer shorts, coil-to-coil shorts, winding-to-winding shorts, and phase-to-phase shorts. Open circuit and ground detection are other benefits of surge testing. The surge tester uses the principle of impedance balance to test the quality of electrical windings.the surge tester works as a capacitive-discharge system. A capacitor is charged with high voltage and then discharged into the winding, through a solid state assembly. This sequence is repeated thus stressing the insulation of the winding with high voltage pulses.

surge comparison tester Surge comparison tests are widely applicable for AC motors, DC motors, transformers, coils, wires, cables, capacitors etc. PtA’s services are well appreciated for its quality of testing . This surge comparison test helps in reducing the amount of damage or catastrophic failures of the motors and ensuring longer life to the power equipment.

• output voltage.: ISO 17025

MegaPulse Antenna Surge including the 4M ohm load resistor required by IEC 60065. Designed specifically for testing to IEC 60065 Fig. 7, IEC 60950 Annex N and IEC 62368-1 Annex D. The IEC 60065, Fig. 7a, switch S is our IER design, designed and built in compliance with IEC 60065, Fig. 7b. External interlock is supplied as standard equipment.

• HV output: 0- 8-16-32 kV, 1000 Joules.
• Voltage: 8KV, 16KV, 32KV Continuously Variable.
• Power Supply: 230v AC + 10%, 50 HZ, Single Phase.
• High Energy: 1000 Joules At Each Range (Optional 2000j).
• HT Network: 33KV.
• Medium Network: 11kV

High Voltage Surge Tester (ST-32) is ideally used to pinpoint location of faults in underground LT/HT cables. The High Voltage Surge Tester (ST-32) is known for its portability and versatility. It is suitable to locate faults in all HT cables ranging from 11 kV up to 33 kV class. Attributes : Portable Mounted on castors Easy to carry and use on the field. Manual and auto operation of impulse discharge Capacity enhancement possible Built in Current coupler to facilitate prelocation Allows easy integration for van mounted operation and installation into small vehicles

• Color: White
• Test Voltage: 32KV
• Model Name/Number: SWT32
• Usage/Application: Cable Testing
• Grade: Automatic

• Max. Surge Current: 250 Amps
• Repetition Rate: 50HZ
• Dimension (W X H X D): 540 X 400 X 600

The basic function and voltage range are all same as ST-210E. Here output will be available in only one channel as there is no need for connecting the master coil motor every time. You can store the waveform of all the types of coils digitally in memory. When testing a particular type, the stored waveform is called and the waveform of the tested coil is compared with it. The operator can do the comparison manually or the software can automatically compare the waveforms, and give you a passfail result. The built-in monitor provides the display of waveforms and the user interface menu. The control and operation is very easy as the software is fully menu driven. There is facility for storing standard test programs. The digital tester is very useful when testing motors at site. You can test all the motors. Store all the results in memory. Then take either printouts or download all data to your PC for analysis. The stored historic data can be used for comparison during periodic testing and the data can be used to monitor the condition of the motor.

Electrical Testing of Motor Components and Equipment:Functional Test,Core Loss (Ring Flux) Testing,Surge Testing Surge Comparison Testing of 3-Phase Windings,Testing of Die-Cast Induction Type Rotors for Open Bars.

surge tester, Winding Resistance Meter, TURNS RATIO METER

Surge Comparision Tester, offered by us, is ideal to be used for motor stators. It is well tested and is procured from the reputed vendors of the market. We are reckoned among the reputed Manufacturer & Supplier of Surge Comparision Tester. By developing a vast distribution network, it has become easy for us to deliver retail as well as bulk orders for Surge Comparision Tester within the committed time frame.   Applications : 1Phase & 3Phase windings, stators & coils AC, DC motors & stators Transformer coils, Solenoids & Chokes   Specifications of industrial touch screen PC : 8"Touch Screen Resolution 800 X600 Industrial grade CPU (Intel CPU  Dual Core 2.5 GHz) 2 GB RAM 500 GB Hard disk Operating System Windows XP (licensed) 2 USB External Ports for connection of Printer and Pen drive Anti-virus (Guardian or Quick heal installed) Operating temp 0-60 ¦C Dust proof and Heavy Body Fanless system to work in adverse heat and humid conditions

Surge Comparison Tester, diecast rotor testing machines

Low Voltage Surge Testers - SWT 4, DCM 300E Leakage Clamp Meters

Surge Comparison Tester, core loss tester, hi potential tester

Impulse / Surge Tester 7703 / 7713, Dynamic Signal Analyzers, Vacuum Oven