Temperature Chambers Dealers

• Power Supply: 220 / 440 Volts 50 Hz
• Temperature Range: -70°C to 180°C, -40°C to 100°C, -20°C to 100°C, 5°C to 50°C .
• Temperature accuracy: ± 1°C or less
• Humidity Range: 40% to 95% RH
• Humidity accuracy: ± 3% or less
• Temperature Sensor: RTD PT-100 sensor
• Humidity Sensor: Capacitive sensor
• Controller: PLC based HMI controller , Color touch screen LCD display, Temperature & humidity settings, Programmable timer for profile settings .
• Data output: USB interface to transfer data into pen drive
• Interior: Stainless Steel 304
• Exterior: Powder coated GI sheet
• Insulation: PUF (75 mm / 150 mm thickness)
• Door: Insulated solid door with lock & key
• Observation door: Toughened glass door w/ silicon profile seal
• Shelves: Removable stainless steel wire mesh shelves
• Noise level: 65db or less
• Refrigeration: EMERSON Copeland / Danfoss make refrigerant CFC-free
• Humidity system: Stainless steel water tank with immersion heaters & automatic water level sensor
• Heating: SS finned air heater
• Air circulation: Motor driven blower
• Safety: Upper and lower temperature & humidity limit alarms (built-in controllers) , Over temperature protection, Over cooling protection, Leakage breaker for power supply, Humidity tank low water safety device .
• Mounting: Caster wheels with brake
• Optional: LED illumination light, All stainless steel construction, PLC with HMI controller w/ ETHERNET connection, 24x7 weekly digital timer, Cable port hole 50 mm w/ silicone plug .

• Material: Metal
• Power: 3-6 kw
• Feature: Rust Proof
• Usage: Industrial Use
• Thickness: 5-10mm
• Surface Finishing: Polished

We are counted amidst the leading manufacturers and suppliers of Thermal Cycling Chamber in india. A type of temperature control chambers, our thermal cycling chamber is efficient in performance. These thermal cycling chambers are designed to meet the international quality standards. Our thermal cycling chamber is highly demanded by the worldwide clients, owing to its high-grade quality.   Known for Long life Sturdy construction Low maintenance Efficient performance

Premium features for the ultimate in testing flexibilityAre you looking for the smallest chamber possible to get your testing done? Hate the footprint and noise of other temperature chambers? Need to closely integrate other test equipment? These are the temperature chambers for you!

• Type: Environmental Test Chambers
• Certification: CE Certified
• Application: Industrial Use
• Color: Stainless Steel
• Voltage: 380V
• Condition: New
• Power: 3-6kw
• Driven Type: Electric
• Phase: Three Phase
• Warranty: 1year
• Automation Grade: Automatic, Fully Automatic
• Country of Origin: CN
• Brand Name: ASLI
• Temperature: -70
• Material: SUS 304# Stainless steel
• Application: LED, battery, ic chips, PV modules
• Humidity range: 20
• Controller: Programmable LCD touch screen
• Temperature fluctuation: ±0.5℃

• Features: Programmable Touch Screen Controller, Running Time Meter, Wide Temperature and Humidity Ranges, Capable of Handling Extreme Temperature and Humidity, High Performance Even Under Load
• Temperature Range: A: -20∼150oC, B: -40∼150oC, C: -60∼150oC, D: -70∼150oC, E : or customized
• Temperature Fluctuation: ±0.5oC
• Temperature Uniformity: ±2.0oC
• Ramp Rate: 1∼3oC/min for heating, 0.7∼1.0oC/min for cooling
• Humidity Range: 20%∼98% R.H
• Humidity Fluctuation: ±2%
• Humidity Fluctuation: +2%  -3% R.H 

We are offering wide range of Temperature Cycling Chambers. These are known for its durability and high performance. These are highly in demand among our client.These temperature chambers are widely appreciated for their silent features like reliable performance, easy installation, low maintenance, high efficiency.

• Temperature Range: Models availabe in 0 up to -86oC
• Capacity: Maximum 100 programs
• Steps: 100 steps in total, 99 cycles repeat setting
• Refigration: Non CFC Gas, Using Standrad compressor
• Rotational Speed: Up to 10, 000 rpm
• Temperature: Ambient to 400 Deg C

After extensive research and development, we put forward the unbeatable range of Temperature Stability Chamber that is lauded for the ergonomic designs and exceptional efficiency. We share space with the top-rated Manufacturers and Suppliers of the Temperature Stability Chamber from Telangana, India. For maximizing the client’s satisfaction, we dole them out in the tailored specifications too. Lastly, we have a fair price range!Highlights This enclosure maintains extremely stable temperature condition of 38°C even when external temperature fluctuates as much as +/- 20 °C and the access shield  is partially open. Each working zones provided with independent access Shield and temperature controls. Air flows vertically through 99.99% efficient HEPA Filter to provide a continuous wash of laminar Flow that creates a ISO class 5 work environment. Air passes through the perforation of work surface and passes through cooling coil and then through zone heaters to bring it up to a constant temperature before it circulate through HEPA Filter and re enter the work area

• Material: Alloy Steel, Mild Steel
• Application: Humidity Environmental Testing
• Voltage: 440 V
• Driven Type: Electrical
• Temperature Range: -40 To +180 Deg C
• Automation Grade: Automatic

• Color: Blue
• Power: 3-6kw
• Driven Type: Electric
• Finish: Coated
• Frequency: 50 Hz

Application : This series of aging test chamber is suitable for the reliability test of industrial products. It has the characteristics of temperature control precision and wide control range. The performance conforms to the criteria GB5170.1.2.5-2017 "High-temperature test equipment for basic parameters verification method of environmental test equipment for electric and electronic products.    Standard accessories: Sight window*1, cable port(portc1,50mm)*1, shelves*2, chamber lamp*1, power cable *2m    Safety device (standard) No fuse breaker, over pressureover heat and over current protection for compressor, Over temp. protect, over load protect of blower, dry heat protection    Control System Balanced Temperature & Humidity Control System    Refrigeration system Air Cooled (Water Cooled Type is option) Hermetic compressor,Single stage refrigeration system CFC-Free refrigerant(HFC-507/HFC-23) 

Temperature and humidity test chambers are available as standard products in a variety of sizes to suit your needs. Our environmental test chambers are often used for steady-state stability testing, basic temperature cycling and accelerated stress testing. With standard sizes ranging from 8 cu.ft. to 64 cu.ft. Z-Plus temperature test chambers meet common temperature and humidity testing needs. The JLS India rust proof grease humidity test chambers conform to international standards of safety and quality and come equipped with ISO certification. They are available in a wide variety of sizes and configurations, including both standard and customized models. Designed for vibration free and quiet operation, these equipments are available at economical prices to suit all kinds of budgets. Features of Temperature & Humidity Test Chamber Economical and efficient design Double walled construction JStainless steel construction Tested under various parameters to ensure reliability of equipment Low power consumption.

• Power: 5-10Kw
• Type: Automatic
• Voltage: 380 V
• Warranty: 1 Year
• Certificate: CE Certified
• Use in: Laboratory

After extensive research and development, we put forward the unbeatable range of Temperature Stability Chamber that is lauded for the ergonomic designs and exceptional efficiency. We share space with the top-rated Manufacturers and Suppliers of the Temperature Stability Chamber from Telangana, India. For maximizing the client’s satisfaction, we dole them out in the tailored specifications too. Lastly, we have a fair price range!Highlights This enclosure maintains extremely stable temperature condition of 38°C even when external temperature fluctuates as much as +/- 20 °C and the access shield  is partially open. Each working zones provided with independent access Shield and temperature controls. Air flows vertically through 99.99% efficient HEPA Filter to provide a continuous wash of laminar Flow that creates a ISO class 5 work environment. Air passes through the perforation of work surface and passes through cooling coil and then through zone heaters to bring it up to a constant temperature before it circulate through HEPA Filter and re enter the work area

• Weight: 2000 Kg
• Temperature Range: -40
• Display: LCD
• Temperature control accuracy: +0.5 Degree Celcius
• Exterior dimension(WxDxH): 2300 x 4500 x 2600 mm
• Power Supply: 380 V AC
• Frequency: 50-60 Hz

The Low Temperature Chamber we manufacture is a non-ambient attachment for testing a variety of machines, automobiles and toys at low temperatures. Your samples can be measured in vacuum, air or inert gas. The chamber fits to all common powder diffractometers and is the instrument of choice for X-ray structure analysis at low temperatures. The chamber has various sample holders for different depths and large sample area. The chamber is also designed for easy mounting of samples.Features:» Can be tested for extremely low temperatures» Accurate readings» Easy sample mounting» User friendlySpecifications: » Test chambers testing : Thermal cycling testing» Accelerated stress testing with over models» Sizes range : 8 cu. ft - 64 cu. ft

• Brand Name: Steco
• Usage/Application: Industrial
• Frequency: 50/60 Hz
• Phase: Single Phase
• Voltage: 220 V
• Power: 0.25 To 4 Kw
• Material: Stainless Steel
• Capacity: 195, 255, 349 liters
• Temperature Range: -80 Degree C / -40 Degree C / -20 Degree C to Ambient

Our Low Temperature Brittleness Test Chambers are designed for testing of different types and methods related to Rubber, Rubber products and all Industrial allied products. The company stands tall among the eminent Manufacturers, Suppliers and Exporters of Low Temperature Brittleness Test Chamber from Maharashtra, India. Testing can be carried out as per IS 3440, ASTM D-751/2137 (Method B) and many more test methods used for cold test. The chamber of the Brittleness Test Chambers maintains a uniform atmosphere of cold dried air at specified temperature.   Trigger Gun :The above equipment has available with Trigger Gun to test low temperature brittleness. The trigger gun is fully made of stainless steel as per ASTM - 2137 test methods. It will give impact on test sample at low temperature. The trigger gun can be fixed on low temperature chamber, and it can operate outside the chamber without disturbing the cold temperature.

SSM-8200 Series Environmental Test Chambers Ideal for Environmental Testing Thermotron’s SSM-8200 Series chambers deliver the quality and accuracy you would expect from a premier worldwide supplier of environmental testing equipment. Featuring the 8200 touchscreen programmercontroller, wide temperature and humidity ranges, and multiple chamber sizes, Thermotron’s SSM-8200 Series chamber is the ideal choice for quality and customizable simulated environmental testing.

• Type: Automatic
• Certification: CE Certified
• Voltage: 220V
• Power: 1-3kw
• Driven Type: Electric
• Phase: Double Phase, Single Phase
• Warranty: 1 Year

• Application: Humidity Environmental Testing
• Voltage: 415 V, 440 V
• Condition: New
• Power: Electronic
• Driven Type: Electrical
• Temperature Range: -40 To +180 Deg C, -70 To 180 Deg C
• Dimension: 0-1000 Ltrs, 1000-2000 Ltrs
• Automation Grade: Automatic
• Country of Origin: India

Heavy duty robust construction with inner chamber made of stainless steel and outer made of m. S. Sheet duly enamel painted. Glass window allows inspection of samples without disturbing the inner chamber temperature. Four stainless steel adjustable shelves are provided with the unit. Air circulation fan is also fitted to the unit for temperature uniformity. Temperature is controlled by microprocessor pid controller and its range is from 10° c to 60° c±2° c and humidity is controlled by imported humidistat from ambient to 95% ±3% rh. Arrangement exists only for increasing the humidity and not for decreasing. Fitted with exterior illumination achieved by flourescent tube and 0-24 gyclic timer. To work on 220/230 volts ac supply. Inner chamber.