Temperature Detectors Dealers

Context Plus XP95 temperature (heat) detectors have a common profile with ionisation and optical smoke detectorsbut have a low air flow resistance case made of self-extinguishing white polycarbonate. They monitor temperature by using a single thermistor network which provides a voltage output proportional to the external air temperature. The response to temperature increases of the standard temperature detec tor (part no: 55000-400IMC) enables the detector to be utilised as an EN54 Grade 2 heat detector. To provide a device for use in ambient temperatures of up to 55°C, a high temperature detector (part no: 55000-401IMC) is also available. This has similar characteristics to the standard temperature detector at 25°C but reaches a 55 count (alarm) at 90°C.

• Brand Name: System Sensor
• Operating Voltage Range: 8 to 30VDC (Nominal 12/24VDC)
• Typical Standby Current @ 25ÞC: 60μA @ 24VDC (LED no blink)
• Maximum Alarm Current (LED On): 80mA @ 24VDC (Limited by panel)
• Application Temperature Range: -30°C to +70°C
• Humidity: 5 to 95% Relative Humidity (non condensing)
• Diameter: 102mm
• Model: 5351E

The 5351E thermal detector forms part of the Series 300 range of conventional detectors. This range of detectors has been produced using the latest in manufacturing and design techniques, pushing out the boundaries of existing conventional detector technology. With its multitude of innovative features, the Series 300 is a detector which ‘acts conventionally, thinks intelligently’. The 5351E thermal detector incorporates an Application Specific Integrated Circuit (ASIC). Combined with the latest in thermal element technology the detector provides efficient and accurate detection of fires, especially in environments such as bars or kitchens where smoke detectors are inappropriate due to the high level of airborne contamination.   Features• Low profile design• Low current draw• Backward compatible with Series 100 detector range of bases• Wide operating voltage 8 to 30VDC• Bi-colour LED detector status indicator• Programmable sensitivity• Addressable feature• Advanced maintenance features via remote hand-held test unit• Range of detector bases available• Tested and approved to EN54 – 5:2000 Class A1R (Amendment 1)• Extended warranty

We are offering our entire range of products in excellent quality packaging to guarantee zero damage during transit. For this, we have hired only professional packing personnel to ensure the same. With our up-to-date transit facilities and speedy services, timely and safe deliveries are guaranteed.

• RTD Types: PT-50, PT-100, PT-200, PT-500, PT-1000
• Temperature Range: -200 to +600 ° C
• Elements: Platinum Thin Film Rtd, Ceramic Wire Wound
• Class of Tolerance (reference Din En 60751): 1/3,1/10, Class A, Class B, Class C, Class Y & K
• Standard RTD MI Probe Sizes: 0 2, 3, 4.5, 6 ,8, 10, 12, 16,19, 20,21, 22,25 mm
• Configurations: Simplex, Duplex, Triplex And Multipoint
• Grade of Protection: IP 55,IP 65,IP 67, Atex , Ccoe, Flame Prrof
• Type of Termination: Plug and Socket,Ip Rated Head,Din and Explosion-proof Connection Head
• Connectors: Mil Std, Nylon, Plastic, Ceramic
• Type of Measurement: Air, Gas, Liquid Immersion, Contact, Surface
• Sheaths: SS 304,SS 316,SS 310,SS 446, Inconel 600,Inconel 800,Incoly Titanium, Inconel, Ceramic, Apm

We manufacture customise rtd pt 100. We specialise in bearing rtd, winding temperature rtd & autoclave rtd.

Canopus Instruments provides multi-channel temperature scanners designed to interface with 8 12 16 channels of 3-Wire RTD PT-100 inputs as per the user requirement.

• Type: Walk Through
• Certification: CE Certified
• Color: Grey
• Voltage: 220V
• Power Source: Electric
• Warranty: 1 Year

Features : No touching body temperature measuring Group people pass without stop Sound and light alarm for high temperature person Data management system to have records Easy operation for any junior operators. Easy movement and installations for any public places

• Type: Resistance Temperature Detectors
• Material: Aluminum
• Application: Industrial Use
• Condition: New
• Country of Origin: India
• Wire System: 2, 3, 4 & 6 Wire System

We offer resistance temperature detectors. Manstronic’s platinum resistance elements are specially designed to ensure precise and repeatable temperature versus resistance characteristics. The sensors are made with controlled purity platinum, have high purity ceramic components and constructed in a unique strain-free manner. Rtds are best for most industrial measurements over a wide temperature range, especially when sensor stability is essential for proper control. Generally speaking, if accuracy is your most important concern and the application temperature is between 140°c and 650°c rtds are probably the best choice. Three-wire is the most common but four-wire provides higher system accuracy.

Platinum resistance thermometer (RTD) in accordance with DIN EN 60751 (class A or B) and thermocouples (TC) in accordance with DIN EN 60584 (class 1 or 2) for industrial use comprise a measuring insert within housing protected against corrosion. These housings come in a wide range of designs depending on the installation and available space, with screw connection, protective tube with screw connection, neck tube with screw connection or flange connection. The wiring of the measuring insert is often incorporated into a connection head "Form B" or "Form BUZ", from which the thermometer can be connected via a cable to an external electrical measuring device. The measuring insert and stainless steel jacket is an easily replaceable unit, which normally includes a ceramic connection base. RTD designs: Single, dual or triple - PT100, PT20, PT1000 etc. in 2- , 3 or 4-wire designs. TC designs: Single, dual or triple couples (type: T , E , J , K or N)

We are a prominent Manufacturer and Supplier of Resistance Temperature Detectors in Tamil Nadu, India. The RTD that we deal in is precision engineered, compact in design assuring fast response time. One won’t encounter vibrations or thermal shock. The Resistance Temperature Detectors, offered by us, have high tolerance. In order to fulfill different requirements of the buyers, it is provided by us in ample of specifications. Details : Elements / Inserts / Probes: Resistance Temperature Detectors (RTD's) Type Platinum / Copper / Nickel - Simplex / Duplex. Standard Din 43760 / IS 2848 / JIS / Gost / IEC 751 Accuracy Class A, B 1/2 Din, 1/3 Din, 1/5 Din Resistance Platinum - Pt 46/50 / 100 / 200 / 500 / 1000Ω at 0 OC Copper - Cu 53 ohms / 10 Ω at 0 OC Nickel - Ni 100 / 200 Ω at 0 OC Insulation MgO Filed, Ceramic Beaded, Mineral Insulated Sheath SS 304 / 316 / Teflon / Kynar etc OD From 3mm Dia to 12mm Dia Termination Plug and Socket, Head Assembly, Lead wire with lugs and Special Construction Extension PTFE / Fiberglass / SS braided Cable. P.C Compression fitting, bayonet fitting, Screwed.

We do not have to worry about stock-out situations and undertaking bulk orders, as are facilitated by a large storage facility. It has the latest inventory management software that helps us to maintain year around availability of the products. Buyers can rely on us for on-time and safe delivery as we are aided by modern transit facilities.   Specifications : 2, 3 or 4-wire platinum element in simplex or duplex assembly Temperatue range -  -50 to 250oC Triple element assembly in 6 mm diameter on request Standard lengths  -  100mm, 150mm and 300mm( Longer assemblies not recommended) Standard 6mm sheath diameter, other sheath diameter available on request Termination  -  Weatherproof Die cast aluminum head with threaded cap and chain 1/2"BSP (F) single cable entry with single compression gland Different types of terminal heads available SS316 sheath material as standard