Temperature Incubator Dealers

B.O.D. Incubator Eco-Friendly : Low Temperature Incubator   Perfect System Double walled, inner chamber made of Stainless Steel sheet 304 grade &outer mild steel stoving painted. Specially designed wire mesh shelves made of SS 304 grade. Gap between the walls is filled with puf insulation. Two Air Circulation Fans are provided for uniformity of temp in working space. Refrigeration system with CFC. free compressor & R 134 a eco-friendly refrigerant is used, Temperature 5°C to 50°C with controlling accuracy of ± 0.5°C is controlled with Dual Display PID Micro Processor controller dual display with safety alarm Built in automatic voltage stabilizer & inside full view Acrylic Door is also provided. To work on 220/230 volts AC. Tracibility calibration certificate of control is also provided.        Optional Accessories:   1. Internal Illumination is provided with 3 nos. flourescent tubes of 60 c.m. length with 3 on/off separates switches : But in case of 4 cubic feet only 300 mm Length Tubes are provided at an extra cost 2. Automatic cyclic timer 0 to 24 hours regulating illumination cycles for at an extra cost3. Above said B.O.D Incubator can be fitted with Direct Printer Port Cable with an extra cost 

• Country of Origin: India
• Application: Medical Use
• Condition: New
• Frequency: 50Hz
• Temperature: 0-50Deg C
• Volume: 100-150ltr

Whether in biotechnology, zoology & botany, whether in the pharmaceutical, cosmetic, food industry, or medicines, test at temperatures between room temperature & ±0°C are gaining importance. Here it is not only a question of excellent thermosetting accuracy but only a unrestricted time - dependent programming, of optimum, reproducibility & of documentation of the important test processes. In close co-operation with discerning users we have included these set new standards but also impress with a particularly high level of functionality. CONSTRUCTION The outer cabinet & inner chamber is manufactured from High Quality Polished Stainless Steel & regular models from quality mild steel finished with hardwearing powder coated. The cabinet is insulated with best quality fiber glasswool or polyurethane foam. Double walled insulated door allows full access to the working chamber HEATING AND COOLING Heating is achieved by Low Surface Temperature Heaters. And they are located in side duct close to circulation fan. Hermetically sealed compressor coupled with evaporation coil and fan cooled condenser provides cooling below ambient temperature. CONTROL SYSTEM State of the Art Microprocessor based temperature controller controls temperature. Temperature is independently sensed by PT-100 Sensor. Microprocessor takes care of any overshooting or undershooting of temperature. Control system also controls automatically cooling and heating devices i.e. Heaters and Compressors. Cyclic Temperature Programming is also available as an option. The Controller Optionally allows taking printouts of temperature with real time clocks. AIR CIRCULATION A powerful fan located in the side duct of the working chamber re-circulates the internal atmosphere. A perforated false floor ensures an even vertical airflow throughout the working chamber. The air traveling upwards is extracted by a Fan and is guided through the side duct comprises of an electric heater, a heat exchanger (cooling coil). Day - Night Simulation

• FEATURES: Back Light LCD displays current value and set value simultaneously,Safety and Convenience over temperature and current protection capability ensure user safety

Microprocessor PID Control Provides Precise temperature control from 0°C to 60°C, timer alarm and auto- tunning Silent Fan Moor and automatic defrost function achieve excellent temperature uniformity and quiet operation 10 Step Programmable Temperature control and 999 cycle Option: Light Bank System Inner Tempered Glass Door with double silicone packing easy sample view without door opening

This the most versatile low temperature indicator for biochemical oxygen demand determination. Caster wheel mounted cabinet is double walled with inner chamber Of anodized aluminum of stainless steel and outer casing of M.S. sheet duly painted. The gap of 75 m.m. between the outer and the inner wall is filled with special grade glass wool to prevent thermal losses. Triple walled back of the unit is fitted with two air circulation fans for maintaining temperature uniform ally through the chamber. Heating elements of nicrome wire are placed in the air path and are duly insulated from the body. The inner chamber is ribbed for placement of shelves at desired height. Full view inner glass door permits inspection of specimens, without disturbing the same, lock and key arrangement Is provided in the double walled outer door. Unit is fitted with door operated illumination lamp inside the chamber. The temperature range from 5 degree c to 50 degree c is controlled by two EGO/JUMO German double action hydraulic capillary thermostat. Refrigeration unit is formed by Hermetically sealed ISI marked SHRIRAM make compressor and the cooling coils are distributed all round the chamber and lie in the air circulation path. An l-shaped prismatic Thermometer is provided at the top on the front panel along with separate indicator lamps for mains, heating and incoming voltage. Supplied complete with 3 shelves, cord and plug to work on 220/230v A.C. supply.

• Application: Lab, Pharma
• Chamber Volume: 400 litre
• Number Of Shelves: 3 Shelves
• Voltage: 220 - 230 V AC
• Frequency: 50 Hz
• Material: SS
• Warranty: 1 Year
• Model Name/Number: OE 503 BS
• Insulation Thickness: 70 mm Glass wool / P.U.F. Insulation between two walls.
• Brand: Ohmkar
• Size: 45 x 45 x 45 cm

The Low Temperature Incubator, often known as BOD incubators are designed to provide excellent temperature uniformity for a wide range of applications requiring low temperature conditions. They are most commonly employed for BOD determinations, fermentation studies, bacterial culturing, plant and insect studies, stability tests and other low temperature applications including desalting of enzyme extracts, serological and complement fixation tests, preservation of vaccines, animal and plant cell culturing etc. and often serve as bacteriological incubators, tissue culture incubators, hospital incubators and scientific incubators. Acmas Technologies Pvt. Ltd. is a leading manufacturer and exporter of these low temperature incubatorsin India, offering a wide range of products in both standard as well as customized models. The company offers highly versatile and economical temperature controlled incubators at affordable prices, specifically designed to meet the requirements of the industry. These highly efficient laboratory incubators use high quality construction materials such as anodized aluminium and epoxy powder coated MS sheets for a highly reliable and sturdy construction. They come equipped with adjustable shelves that can be rearranged with ease, allowing easy placement and segregation of differently sized samples. These double walled insulated cabinets are designed for maximum space efficiency and are available as both floor-mounted as well as bench-top models.  

Most versatile for Biochemical Oxygen Deand determinations. Castor wheel mounted cabinet is double  walled with  inner chamber  S.S. and outer wall of M.S. Sheet duly powder coated. The gap of 75 m.m. between the outer and  the inner wall is fitted with special grade glass wool to prevent  thermal losses. Triple walled back of the unit is fitted with two air circulatic  fans for maintaining  temperature uniformity throughout the chamber, Fully view inner glass/Acralic door permits inspection of specimens, without disturbing the same. Lock and key arrangement is provided in the double  walled outer door. Unit is fitted with door operated  illumination lamp inside the chamber. Refrigeration unit is formed by ISI marked compressor, The front panel is provided withseparate indicator lamps for main, heating and incoming voltage. Supplied complete  with 3 shelves, cord and plug to work on 220/230 A.C. supply. Temperature From 5.C to 50.c is controlled by MICRO PROCESSOR ELECTRONIC DIGITAL TEMPERATURE INDICATOR-CUM-CONTROLLER with an accuracy of ±0.5°C.    

Labtronixed Inc Low temperature BOD Incubator Shakaer temp. 2 Deg. C to 65 Deg. CAccuracy: ± 1 Deg. CSensor: PT – 100 type Microprocessor based incubator shaker controller. Microprocessor based cooling incubator shaker controller with auto tune real time clock. temperature range 0 -100 degree. Labtro incubator shaker profile advance technology. PID Settings Labtro Incubator shaker hysteresis , alarm , clock, on board data logging upto 100 logs for temperature RS 232 Data logger with software windows based. thermal printing.RPM: 40-250 , 30-300 40-350 , 50-400 RPM continuously variable & settableTrays perforated SS 304.  suitable loadOrbital oscillation Temperature Range from 2 °C to 65°C Double Silicon Glass Door Special Features in our BOD / Cooling Incubator shaker , Labtro Advance technology BOD / Cooling Incubator Shaker Speed Control is Microprocessor Based Labtro refriegerated Incubator Shaker in our BOD Incubator shaker is controlled by a drive which in turn is controlled by a drive which in turn is controlled through micro processor based digital speed controller cum RPM indicator with Better Uniformaity and accuracy. Labtronixed BOD Incubator Shaker inner chamber stainless steel grade (304 / 316) Outer chamber CRCA steel duly powder coated. Machine Stops :- a) Door Open b) Timer Program End. c) Temperature Program End. Safety features with Alarms. a) Programe End Alarm b) Temperature cycle End Alarm c) Cooling cycle time End Alarm d) Over Shoot Temperature Alarm e) Shaking Cycle End Alarm, Microprocessor controlled incubator shaker with precise setting of agitation speed, running time and temperature. Labtro refrigeration through a hermetically sealed compressor used CFC free refrigerant. Labtro incubator shaker double walled construction with PUF insulation and large glass observation window permits easy viewing and monitoring. Labtro BOD / Incubator Shaker has castor wheel is mounted for easy mobility with locks.

Most suitable for experiments requiring low temperature conditions like micro-organism or activation, cell culture process of animals and plants, good storage and desalting process of enzyme extracts etc. Door operated illumination lamp is fitted inside the chamber for easy visibility. FINNED TUBE EVAPORATOR facilitates uniform and faster cooling effects.  

Roch Mechatronics Inc. Incubator's application includes industrial, Pharma, Biotech, Mediacal research.• Precise Microprocessor/PID/Digital Controller• Temperature Range from 0°C to 60°C • Reliable and Accurate Temperature Control,• Double Silicon Glass Door• Optional RS-232 Communication InterfaceMicroprocessor/PID/Digital Control provides precise temperature control from 0°C to 60°C , timer, alarm, auto-tunning (Option : auto on/off function)Silent Fan Motor and automatic defrost function achieve excellent temperature uniformity and quiet operation10 Step Programmable Temperature control and 999 cycleBack Light LCD displays current value and set value simultaneouslyInner Tempered Glass Door with double silicon packing easy sample view without door openingSafety and Convenience over temperature and current protection capability ensure user safety

Low Temperature B.O.D. Incubators are most suitable for experiments requiring low temperature conditions like microorganism or activation, cell culture process of animals and plants, good storage and desalting process of enzyme extracts etc. We manufacture, supply and export Low Temperature B.O.D. Incubator. Our Low Temperature B.O.D. Incubator comes with user-oriented modular design of shelves that helps in adjusting each space of shelves without difficulty. Features : With a solid double walled door, a full view inner plexi-glass door enables inspection and monitoring of inner chamber specimens without disturbing the process temperature.Excellent quality magnetic gum packing door gasket for external door. Forced air circulation at triple walled back by durable coaxial blower, maintains optimum temperature uniformity and homogeneity.High grade high pressure foamed in-palace PUF insulation between outer and inner chamber for minimal thermal losses. Caster wheel mounted for easy portability. Front double walled door is provided with lock and key arrangement. Door operated illumination lamp is fitted inside the chamber for easy visibility. Finned tube evaporator facilitates uniform and faster cooling effects. Options : Interior illumination arrangementCyclic timer to control cyclic illumination conditonsCo / air port – for incubation of co2/air mixtureHigh pressure seamless carbon dioxide gas cylinder of 10 liter water capacity, complete with neck ring and valve with 99.99% pure carbon dioxide.Communication port with interface and data cable to download data to your Pc. Humidity generation and control arrangement through a digital humdity indicator-cum-controller from 55 Rh% to 95% rh at cool temperatures.

The working chamber adopt the round angle structure , easy to clean. Microprocessor temperature control. LED display for BJPX-HT series, LCD display for BJPX-HTII series. The starting up time can be preset. Electrical power outlet in the chamber. UV light for sterilization. Double door design and magnetic door sealing. Universal Castors for easy movement. CFC-free refrigerant with high efficiency.

Temperature Incubator, Colorimeters, lab centrifuge, Overhead Surgical Light

Low Temperature Incubator, Safety Bottle Carrier, Preparative HPLC Columns

low temperature bod incubator, Gold Hallmarking Centre Instruments

Low Temperature Incubators, Batch Type Dryer, Tube Dryers, Walk In Oven

Temperature Incubator, Dry Bath