Tensile Strength Tester Dealers

• Load Cpacity: 500kg x 0.05kg(50gm)
• Elongations: 900mm x0.1 mm
• Traverse speed: variable 100 & 300mm/min
• Motor: 1Hp,1425 rpm, induction motor
• Power required: 220 VAC,50Hz,1500 Single phase
• Standards: Astmd 5034,5035,Bs 3320,2576, Iso- 13934-13935

MyQ new Digital Tensile strength tester is helpful to identify tensile strength & elongation of fabrics. In the industrial textile industry, tensile strength typically refers to the strength and elongation properties of the material. Textiles can be tested in many forms, including single strands, yarns, webbing, woven, braided materials and non-woven fabrics.   Most textile fabric tensile testing is performed as either a grab test, to eliminate edge effects, or a strip test, including edge effects. For a grab test, the grips of a testing machine clamp a fabric sample in the center using jaws smaller than the sample width. For a strip test, the grips clamp a strip of fabric using jaws wider than the sample width.   Key Features New updated model with imported motor. Unit changing facility (LOAD)- N,Kn,KG,LBS Unit changing facility (Elongation)- mm,inch,Cm Control – Up, Down, Stop Manual & Computer Both   Test Facility Tensile with elongation test Seam slippage test

• Color: Available In Many Colors
• Voltage: 110V
• Application: Strength Testing
• Power: 1-3kw
• Driven Type: Electric
• Warranty: 1year
• Weigth: 0-20kg
• Automation Grade: Automatic

Tensile Strength Tester that we offer is extensively used for determining the breaking force of any kind of fabric, board, plastic sheet and wire, HDPE bag, jute bag, yarn lea, cable, etc. Tensile strength determines the breaking point of any material, which means the point on which the material completely breaks or disfigured. The reading is shown in KGF (Kilogram Force). It also helps in measuring the elongation of materials. Tensile Strength Tester, we offer, is based on constant rate of traverse principle according to which one end of the test specimen will remain at the stationary grip and the other end moves at a known fixed speed. Our Tensile Strength Tester is microprocessor based and has the capacity to provide protection against overloads along with the facility of peak hold and auto calibration. Further, the load is indicated in kilograms or Newton. Related Standards : ASTM D 434 D 1578 D 5034 D 5035 BS 1610 BSEN 1002 � 3 DIN 51221 Technical Specifications : Capacity of Tester with accuracy of 100g : 250 Kgf. and 500 Kgf Capacity of Tester with accuracy of 10g : 20 Kgf, 50 Kgf and 100 Kgf S Type Load Cell fixed with Top Grip Traverse Speed : 300 & 100mm /min. Max. Grip Separation :1000 mm Min. Grip Separation : 25 mm Top Grip is fixed and Bottom Grip is Movable Type Elongation measurement by Steel Scale and Digital Counter Meter Both Digital Display of Load and Elongation Peak Value of Last test can be read User friendly key panel with switch of Zero setting and peak value of last test Motor : ½ HP Single phase 220V 50 Hz. (for Capacity up to 100 Kgf ) Motor : 1 HP Single Phase 220 V 50 Hz (for Capacity up to 500 Kgf) Power : 220 V AC 50 Hz Safety Device : By Limit Switch to protect from Over Traverse Other Information : Pay Mode Terms : T/T (Bank Transfer), Western Union, Other Minimum Order Quantity : 01 Set Port of Dispatch : Delhi - India Production Capacity : 200 Machines per Month Delivery Time : Ready Stock Packaging Details : Wooden Packing

Specifications: Size: Customized Power Source: AC220V Accuracy Grade: 0.5 Product Code:GE-2065

These are used for testing the tensile strength and expansion of material like cables, wires, conductors, ferrous non- ferrous and packaging material. Further, by using relevant grips and combining correct transverse speeds, tests can be conducted on it and in addition, bending and compression tests can also be conducted on it. The machines are made in different capacities as per ISO, BS, DIN & ASTM standards. These are floor mounted and provide accurate data (accuracy within 1 +) on the physical properties of materials in a very quick and simple manner.

• Brand Name: Sisco India
• Country of Origin: Made in India
• Usage/Application: Laboratory
• Material: Stainless Steel
• Display Type: Digital
• Operating Mode: Automatic
• Testing speed: Up to 300 mm/min

Presenting high grade and excellent range, we ensure that the products are as per the globally accepted standards. For the convenience of our customers, we issue an invoice stating the entire details such as products, quantities and agreed price. Moreover, we ensure safe and hassle-free payment procedure.   Features : Sturdy construction High operational fluency Impeccable performance Technical Specifications : Capacity - 500 Kgf / 250Kgf Accuracy  - 0.100 Kg. (100g) Display Unit  - N/mm2, kgf/Cm2, Pound Operating System - Fully Automatic and Manual Both Maximum Grip Separation  - 1000mm Motor - 0.5 hp, Crompton / ABB 220V AC 50 Hz Display Units - Load, Speed, Elongation Variable Speed - 50 to 500 mm /min With Specimen Cutting Template With Window based Software licensed to customer Report  - Tensile Strength, Elongation, Yield Strength with Graph.   Other Details : Approx. Price - Rs 1.19 Lakh / Piece

• Opening in upper clamp: 30.5 mm diameter
• Opening in lower clamp: 38.1 mm diameter
• Rate of fluid displacement: 95 cc/minute
• Test Fluid: Glycerin
• Pressure range: Range Up to 7-21-28-35 Kg/Cm2 x0.2 Kg/Cm2

Bursting strength of any material such as fabric, leather, paper etc. Is its strength under action of a multidirectional force and is defined as the hydrostatic pressure required producing rupture of the material when pressure is applied on one of its surfaces at a controlled increasing rate through a rubber diaphragm.  

• Features: Optimum performance, Less maintenance, Long working life.
• Use: Used in laboratories

• Type: Tensile Strength Tester
• Color: Blue And Grey
• Condition: New
• Warranty: Lifetime Buyback Warranty
• Certification: ISO 9001:2008 Certified
• Country of Origin: India
• Brand Name: Paramount

Tensile Strength tester is professionally applicable to measurement of tensile, peeling, tearing, adhesive, pulling force as well as other properties of fabrics ,yarn leas , home textile , footwear, Leather, plastic films, soft package materials, plastic flexible tube, adhesive tapes, label stickers, protective films, aluminum foils, diaphragms, non-woven fabrics, leather ,rubber and paper, etc. Paramount Tensile Strength Tester i10 ™ (500 Kg) is Next Generation ergonomically designed equipment, which works on the Constant Rate of Elongation (CRE) principle. The equipment main body is completely made of mild steel with two clamps or jaw to hold specimen. The lower clamps or jaw is movable & the upper clamp is stationary. The load exerted on the movable jaw is sensed by load cell attached with upper clamp, which directly indicates the load digitally in kgf as well as in software. The equipment runs with advanced software through laptop (Supplied along with it). The equipment has an in-built provision for safety arrangement. It has a provision to prevent over travel of the moving jaw. It has an in-built line filter arrangement to check any fluctuations in power supply so that it does not have any effect on the result generated, thereby giving accurate result. The exclusive feature of Tensile strength Tester i10™ is that it can run from the control panel or through the software in the laptop (Supplied along with it). Its software is advanced with all latest feathers. The equipment is finished in special blue & grey powder coated paint. The other parts are made with Stainless-Steel to give a corrosion resistant long-life finish.

• Type: Tensile Strength Tester
• Application: Strength Testing
• Color: Grey
• Voltage: 220V
• Condition: New
• Power: 9-12kw
• Driven Type: Electric
• Warranty: 1year
• Certification: ISO 9001:2008 Certified
• Weigth: 60-80kg
• Automation Grade: Fully Automatic

Our company is a prominent Manufacturer and Supplier of Tensile Strength Tester. The Tensile Strength Tester is used to measure the tensile strength which is indicative of fiber strength, fiber bonding and fiber length. The Tensile force required to produce a rupture in a strip of paper board, measured in MD & CD expressed in kN/m. Tensile Strength can be used as a potential indicator of resistance to web breaking during printing or converting. The procedure standard explained in TAPPI T-494.Model : SGT-G017

• Country of Origin: India
• Type: Tensile Strength Tester
• Application: Strength Testing
• Color: Blue
• Voltage: 220V
• Condition: New
• Power: 15 AMP
• Driven Type: Electric
• Warranty: 1year
• Certification: ISO 9001:2015
• Weigth: 80-100kg
• Automation Grade: Automatic
• Brand Name: IKON INDUSTRIES
• Capacity: 500KG
• Color: Blue
• Certification: Traceable to NABL
• Power: 15 AMP
• Height: 6 Feet
• Speed: 300 mm/min
• Accuracy: +/- 0.5% of FSD