Tensiometer Dealers

• Brand Name: Virtual Hydromet
• Application: Industrial,Laboratory
• Length: 15, 30, 45, 60, 90, 120 cm
• Feature: Long lasting , Easy Installation , Easy to use
• Accuracy: +-5%
• Scale of Millibars: -1000 to 0 and mmHg -760 to 0 range
• Measuring Range: 0-85 Kpa

• Application: Laboratory, Industrial
• Application: Auto Testing Machine
• Feature: Superficial & interfacial tension, Powder wettability
• Measurement Range: 1-999 mN/m
• Condition: New
• Power: Less than 40W
• Model: DY300

Surface Tensiometer: The measuring methods used in Kyowa surface tensiometer are the Wilhelmy plate method, du Noüy ring method, pendant drop method, and maximum bubble pressure method.The Dyne Master tensiometer series starts with model DY-300 and the most sophisticated model is the DY-700.    DY-300: When interfacial tension is measured, the system is delivered with du Noüyring and a bigger sample receptacle with graduation. Operation can be done using either the right or left hand, and the cell can be viewed during measurement.The light weight allows operators to conduct experiments without much effort. Viscous liquidsup to 2000 mPa?s can be measured. Displays: Density - Temperature compensated density and specific gravity - Percentage of Brix - Alcohol concentration - Sulfuric acid concentration - API degree - Baume degree– Plato - Proof degree Graphic LCD display: Temperature - Sample number - Auto sensing oscillation stability - Auto data saving - Auto data output - Data deletion - Battery capacity The life of battery is twice that of conventional makes and results in much longer operation time.The sampling volume and speed are to be controlled using a single hand. Features: (i) The pre-wetting function eliminates measurement errors caused by unsuccessful wetting of plate. (ii) Applicable for surface tension measurements of liquid samples with a volume as small as 1mL with optional 1cc lab dish. (iii) Ideal for Quality Control purposes with the repetitive measurement function. (iv) Lamella length measurements and du Noüy Ring method with a platinum ring. (v) Measurement of liquid density and sedimentation behavior with optional kits. (vi) Temperature dependent measurements (optional with temperature control stages and peripheral devices) Industries: Paint |Ink |Rubber |Pharma |Ceramic | Nano-technology |Polymer | Research institutes |Measurement of interfacial tension (IFT) |Transformer oil quality study

• Type: Tensiometer
• Material: Aluminum
• Certification: CE Certified
• Color: Silver
• Voltage: 220V
• Application: Industrial
• Operating Temperature: 10-50D/C
• Feature: Accuracy, Digital Water Meter Display
• Warranty: 1 Year
• Available length: 15, 30, 45, 60, 90, 120 cm.

• Application: Industrial
• Feature: Accuracy, Multi Jet
• Warranty: 1 Year
• Instrument Size: 220mm x 280mm x 340mm
• Instrument Size with carrying Case: 250mm x 350mm x 365mm
• Weight of the Instrument: 05 Kgs
• Weight with Carrying Case: 13 kgs

Standards The instrument is based on the DuNuoy principle and confirms to various National and International standards like IS:6104/1972; ASTM-D-971, 1590, 1331   Applications Surface and Interfacial tension testing has become indispensable to a variety of industries including Paint, Chemicals, Dyes, Coatings,Inks, Plating, Soaps and Detergents, Surfactant, Emulsions, Crude,Transformer oils, Lubricants and many many more. These Tensiometer are also being used in many research & technical centers as an important instrument for scientific studies. The most widely used application being to verify transformer oil condition, by various players in the power distribution and generation fields  Advantages : Digital Read Out Of Tension In Dynes/Cm Or Mn/M Easy And Quick Change Of Torsion Wire Quick And Easy Calibration Even On Field Higher / Infinite Range Of Testing Can Be Carried Around In The Field   CI’ Interfacial tensiometer is supplied complete with Power Cord - 1 no. Sample Dish - 1 no. Platinum Ring 6cm - 1 no. Manual - 1 no. Carrying Case - 1 no.

Details : The SIGMA 2000 interfacial tensiometer is a fully automatic device for the measurement of interfacial tension in transformer oil accord. to ASTM-D971 and IEC60422. No previous knowledge of IFT measurement is required, the step-by-step instruction on the large LCD display guides you through the measurement process and ensures fail-safe measurement every time. Measurement in transformer oil made easy. Accord. to ASTM-D971 and IEC60422 Requires no knowledge of IFT measurement Step-by-Step instructions Large LCD display Immediate display of data on screen

• Voltage: 100-240 V
• Test Speed: 10-100 mm/min
• Test Way: 280 mm
• Brand Name: BAK
• Condition: New

We are pleased to offer swiss technology high quality bak teston tensiometer – swiss make tensiometer at very competitive price. features : * hand carry and easy usable * the tool is mounted in a handy aluminium case * long service life with low operation costs * high efficiency * maintenance free * swiss technology * high quality * modern and functional design * multifunctional application : tensiometer for tensile and shear test of membranes with compactflash memorycard for recording test datas and integrated printer . technical data : voltage : 100 - 240 v power : 250 w frequency : 5060 hz test speed : 10-100 mmmin test way : 280 mm max. Force : 2000 n size l x w x h : 660 x 435 x 170 mm weight : 20 kg clients can avail this tensiometer (bak-teston) at industry leading prices from us.

• Type: Soil Tensiometers
• Material: MIX
• Certification: ISO 9001:2008
• Application: SOIL TESTING
• Color: BLUE
• Display: DIAL TYPE
• Automation Grade: Manual
• Country of Origin: India
• Brand Name: NSAW
• Length: 30CM

• Type: Measuring Instruments
• Condition: New
• Application: Measuring Use
• Feature: Superior Finish
• Automation Grade: Semi Automatic
• Brand Name: DEE TECH INDIA
• Working Pressure: 20KGS

the tesiometer is used by paper industries to measure the tensions of paper machine clothings.

• Brand Name: Embsys
• Application: soil, agriculture
• Voltage: 10-24v DC
• Length: 15cm to 120cm custom
• Calibration: pre calibrated
• Temperature Range: 0-60 deg
• Power Consumption: 0.8W 
• Resolution: 0.1kpa
• Power Source: DC source
• IP Rating: IP67
• Response time: 200ms
• Shell material: transparent PVC plastic pipe

• Feature: Long lasting , Easy Installation , Easy to use
• Application: Industrial, Laboratory
• Length: 15, 30, 45, 60, 90, 120 cm
• Application: Weather instruments
• Accuracy: +-5%
• Scale of Millibars: -1000 to 0 and mmHg -760 to 0 range

• Application: Laboratory
• Country of Origin: Made in India
• Item Code: MSW-604
• Accuracy: 0.1%
• Range: 0-200 Centibar

Drop by drop more precise: The LAUDA Drop volume Tensiometer TVT 2 The LAUDA Drop volume tensiometer expands the options for measuring the dynamic surface tension and interfacial tension of liquids. In a unique process, the system can be controlled under Windows with minimum loading of the computer, even when multi-tasking. New functions, such as individual drop measurement of up to 100 drops are now possible. The LAUDA Tensiometer TVT 2 consists of a measurement desk and a control unit. The core of the electronic component is a microprocessor that controls the discharge speed, the counting of the encoder pulses, and the communications. LEDs and pictograms indicate the current status of the unit. Keys are provided for positioning the syringe plunger even in offline mode. During online operation, an RS 232 interface enables communication with the operating PC. Application examples: Wetting agent concentration in galvanic baths Screening tests of emulsifiers Additional applications that cannot be handled or can only be handled incompletely with other devices:Characterisation of the dynamic behaviour of surfactant molecules at the surface and interface within seconds or hours. High-precision measuring of interfacial tension in a very wide range down to 0.1 mNm. Measurements on highly volatile andor toxic substances, through gas-tight sealing of the system. High viscosity and skin-forming liquids can also be measured easily and rapidly.

• Weight: 8 Kg
• Size: 580 x 330 x 240 mm
• Maximum Interfacial Tension: 1000 mN/m (0.001 mN/m)
• Stage Speed: 0.01 to 500 mm/min

• Type: Surface Tensiometers
• Material: Aluminum, Cast Iron, Plastic, Stainless Steel
• Color: Brown, Green, Grey, Red
• Voltage: 110V, 220V, 380V, 440V
• Application: Industrial
• Operating Temperature: 10-50D/C, 50-100D/C
• Feature: Digital Water Meter Display, Spiral Water Meter
• Warranty: 1 Year, 2 Years
• Automation Grade: Automatic, Manual, Semi Automatic

• Application: Tertiary crude oil recovery , Solvent-free degreasing, Liquid explosives
• Pay Mode Terms: T/T (Bank Transfer)
• Item Code: DVT50
• Range: 0.1 -100 mN/m
• Resolution: 0.001 mN/m
• Minimum Sample Required: 20 ml
• Power Consumption: 10 W
• External Circulator: Optional

Product Description   SURFACE AND INTERFACIAL TENSIOMETER is used for measurement of surface and interfacial tension of liquids using the Principles of Dr P L DuNouy. Has been found useful for measurement of OILS, DETERGENTS, DYES, COSMETICS, INSECTICIDES, PHARMACEUTICALS, EMULSIFIERS, BIOLOGICAL FLUIDS, MINERAL BENIFICATION, ETC. And meets A.S.T.M. D-1590 Test for Surface tension of water and Waste Water D- 1331 for surface and interfacial tension ofn detergents. Range is 0 to 90 dynes, readings are in dynes per centimeter, reproducible to +-0.05 dyne. Samples as small as 5 ml can be tested .

• Power Source: Electric
• Series: A80 series
• Deals In: New 
• Portable: Yes

Kyowa Interface started manufacturing surface tensiometers in Japan in the year 1957.The measuring methods used in Kyowa surface tensiometer are the Wilhelmy plate method, du Noüy ring method, pendant drop method, and maximum bubble pressure method. The DyneMaster tensiometer series starts with model DY-300 and the most sophisticated model is theDY-700.  When interfacial tension is measured, the system is delivered with du Noüy ring and a bigger sample receptacle with graduation.Operation can be done using either the right or left hand, and the cell can be viewed during measurement.The light weight allows operators to conduct experiments without much effort. Viscous liquids up to 2000 mPa･s can be measured. Displays: Density - Temperature compensated density and specific gravity - Percentage of Brix - Alcohol concentration - Sulfuric acid concentration - API degree - Baume degree– Plato - Proof degree Graphic LCD display: Temperature - Sample number - Auto sensing oscillation stability - Auto data saving - Auto data output - Data deletion - Battery capacity The life of battery is twice that of conventional makes and results in much longer operation time.The sampling volume and speed are to be controlled using a single hand.

• Brand: Kyowa
• Model Name/Number: DY700
• Accuracy: 0.02%
• Temperature Range: 150 Degree C
• Usage/Application: Industrial
• Technique: Wilhelmy Plate and du Nouy Ring
• Control: Computer Controlled

• Temperature range: 10
• Dimension: 208×90×100mm,400mm×220mm×350mm etc

Everything in operator’s view - The measuring rollers -The readings -The measured material.No deformation, long life.Combination of both test methods of platinum plate and ring; The display value is that of surface tension in test method of platinum plate.Tensiometers are used to measure and adjust the tension of sewing machines to get best and highest quality stitched seams.

• Type: Tensiometer
• Material: Stainless Steel
• Application: Industrial
• Voltage: 110V, 220V
• Operating Temperature: 10-50D/C
• Warranty: 1 Year
• Display: Local
• Automation Grade: Automatic, Semi Automatic
• Country of Origin: India

We are offering interfacial tensiometer is versatile in nature and used for verifying surface tension of liquids as well as interfacial tension of 2 liquid media. The interfacial tensiometer is further used for quality testing of transformer oils. Besides, we are one of the distinguished manufacturers of interfacial tensiometer. features : du-nunoy principle measurement : up to 90dynes/cm accuracy : 0.5 dynes applications : paint pharma fmcg oil .

• Range: 10N/CM to 200N/CM

Possible in all positions longitudinal, cross direction, underside etc.For Tension Measurement of Forming Fabrics, Felts, Screens

We manufacture and export the most treasured tensiometer. Our tensiometers calculate the soil moisture tension. It is an indirect way to determine the level of soil moisture. Scientific study of soils and irrigation scheduling are the areas where our tensiometers are widely used.

Advanced instrumentation engineered for classical and new measuring techniques. The wetting properties of com­mon solids can be measured with electronic tensiometers, which have evolved into dynamic contact angle meters. The extensive application of internal and external computer control has provided for a high level of automation and the generation of highly reproducible results in the determination of wetting properties exhibited by powders, fibres, and fabrics as well as the thermodynamic properties of surfactant solutions. DCAT 11 The dynamic contact angle measuring instrument and tensiometer DCAT 11 is the standard instrument for the weight based measurement of contact angle, surface and interfacial tension, critical micelle formation concentration, density, sedimentation and penetration rate, plus penetration resistance.

Manual Tensiometer K6: A Tensiometer for rapid determination of interfacial tension and the surface tension of liquids and a very successfully instrument wherever it is necessary to test the effectiveness of emulsifying agents, soaps and wetting agents.As well as It is used to indicate the presence of oxidation and polymerization in fats, organic and inorganic oils and fuels, etc K6 is also suitable for training purposes in schools and universities for demonstrating the action of the surface tension force in a comprehensible manner.

Orthodontic Tensiometer also called Dontrix Gauge can be used for evaluation of elastic force. It measures force of coil springs, arch wires and elastics.

A Tensiometer is the only instrument that gives you the true moisture indication in the soil it is installed in. A soil moisture Tensiometer measures soil water potential matric potential – an indicator of the force that a plant crop must exert to obtain moisture from the soil medium it is planted in.