Testing Services

Testing the pressure of vessels like gas cylinders, pipelines, fuel tanks, and boilers etc., is imperative to ensure reliable performance even in harsh conditions. Dev Industrial Security & Fire Services offers energy-efficient and cost-effective hydrostatic testing services to help you attain peace of mind while using the vessels. Our professionals visit your site and perform extensive testing of the vessels to offer validation for safe use. Visit our office in Vadodara (Gujarat, India) or dial our numbers to make sure your vessels are adhering to the highest industry standards.

Cylinders are made of material that have desired flexibility of expansion and contraction during pressurization. They begin to deteriorate over a period of time due to conditions such as filling, handling, transportation and shop floor conditions. Hydraulic cylinder test centres help in checking the same. It helps to conduct periodic testing by assessing parameters like visual damage, weight loss and loss of elasticity.Hydrostatic Cylinder Test Station offered by us are suitable for all weather conditions.    Some of the features of cylinder testing station are : Cost-effective Resistance to corrosion and rust Easy operation Easy maintenance Fine finishing and perfect polish Durable and sturdy construction Long life

• Country of Origin: India

EN 747-1,2:2012+A1:2015 Testing Service for Bunk Beds and High Beds by CDG Inspection LimitedEnsuring the safety and durability of bunk beds and high beds is crucial for preventing accidents and ensuring long-term performance. CDG Inspection Limited provides comprehensive testing services to ensure compliance with the EN 747-1,2:2012+A1:2015 standard, which specifies safety requirements for bunk beds and high beds in residential settings.Key Testing Areas of EN 747-1,2:2012+A1:2015Structural Strength and Stability: We test the overall strength and stability of the bed to ensure it can safely support the intended load without risk of collapse. This includes evaluating the bed’s framework, joints, and connections for durability and structural integrity.Load-Bearing Capacity: Our tests assess the maximum load the bed can handle, including static and dynamic loads. This ensures that the bed remains stable and functional under typical use conditions.Guardrails and Safety Barriers: We evaluate the effectiveness and height of guardrails and barriers to prevent falls. Proper installation and height are crucial for safety, especially for the upper bunk of a bunk bed.Durability Testing: We conduct tests to assess the bed’s resilience against wear and tear. This includes testing for resistance to impact, abrasion, and repeated use to ensure the bed maintains its safety and functionality over time.Small Parts and Entanglement Hazards: We check for small parts and potential entanglement hazards that could pose risks, especially for children. This includes ensuring that all components are securely attached and do not present choking or entrapment risks.Surface Finish and Material Safety: Our testing ensures that the materials used in the construction of the bed, including finishes and coatings, meet safety standards and do not pose health risks.Benefits of EN 747-1,2:2012+A1:2015 Compliance Enhanced Safety: Compliance with EN 747-1,2:2012+A1:2015 ensures that bunk beds and high beds are safe for use, minimizing the risk of injuries and accidents.Regulatory Compliance: Meeting this standard helps manufacturers adhere to European safety regulations, facilitating market access and regulatory approval.Consumer Confidence: Certification provides consumers with assurance of the bed’s safety and quality, helping to build trust and increase marketability.Market Advantage: Compliance with EN 747-1,2:2012+A1:2015 sets your products apart from competitors, demonstrating a commitment to safety and quality. CDG Inspection Limited offers expert testing services to ensure your bunk beds and high beds meet the EN 747-1,2:2012+A1:2015 standards. Our experienced team uses advanced equipment to provide accurate, reliable results.Contact us today to schedule your EN 747-1,2:2012+A1:2015 testing and ensure your products are compliant with the highest safety standards!

We are proud to offer comprehensive technical testing services specifically tailored for the manufacturing sector. With our expertise and experience, we assist manufacturers in ensuring the quality, reliability, and safety of their products and processes. Our dedicated team of professionals conducts rigorous product testing, quality control testing, and process testing to identify any deviations or non-compliance. We also perform thorough equipment and machinery testing to verify their performance and accuracy.From functional testing to performance testing, security testing, and compatibility testing, we employ rigorous testing techniques to deliver accurate and actionable insights. Our goal is to help you enhance your product’s performance, minimize risks, and achieve optimal user satisfaction. With a customer-centric approach, we work closely with your development team, providing detailed reports, actionable recommendations, and ongoing support throughout the testing process. Trust kelvin instruments and service to ensure the seamless functioning and impeccable quality of your technology solutions through our expert technical testing services.

• Type: All Bakery Products
• Testing Location: Lab
• Any Specific Test Criteria: FSSAI, NABL, Nutritional
• Mode of Report: Soft Copy, Hard Copy
• Payment Mode: Online / Offline

The confectionery things usually comprise of ice-creams, chocolates, cocoa merchandise, and sugar merchandise like foam wafers, candies, jelly merchandise, fruit gums, biscuit, chocolate, pastry, pickle, jam, sweet, honey, etc. we tend to adopt testing techniques relying upon the class of confectionery item.   This bakery product testing service analyzes the confectionery things for the following microorganism parameters: Coliforms and E. coli Total colony-forming units Yeast and mildew Alcoholic acidity Fat Confectionery testing is vital to stay checked on the adulteration within the merchandise. To extend the market price, an entire analysis report with all the nutrition content and additives gifted within the confectionery item is needed to befit the labeling.

We, Hayagreevaya Metal Industries well known as a quality-oriented organization, we strive hard to offer premium quality Bhargo metal testing laboratory services. To reach maximum client satisfaction, we plan and efficiently perform our work. The offered services are communicated in rendering with the needs of clients and it has helped us attain a huge client base across the country. We have attained a reputable position in the market by offering reliable services that are professionally carried out to provide complete satisfaction to our clients. Moreover, we conduct regular training sessions and seminars for our team members to keep our experts updated with the current market development. We are an extremely acclaimed unit to offer these testing services. Our domain experts are completely aware of the modern testing measures. So, they are compiling these services in line with the up-to-date progress. We are completely backed by our extremely advanced and well-equipped testing facility.

Our PCB Assembly Services offer expert solutions for assembling a variety of PCBs, including Military, ISRO Standard, and Space Grade PCBs, ensuring the highest quality and reliability for critical applications. We specialize in assembling single-sided, double-sided, and multilayer PCBs, as well as flexible and rigid-flex PCBs for compact, high-performance designs. With advanced equipment and stringent quality control processes, we guarantee precise component placement and soldering, delivering fully assembled boards that meet the highest industry standards for aerospace, defense, and commercial projects.

• Service Location/city: Worldwide
• Type of Transcription: Education Transcripts
• Type of Language: English
• Mode of Payment: Online & Offline
• Type: Counseller

With over 10 years of experience, we specialize in helping students secure their place in selective schools across Australia. Our proven methods, expert tutors, and tailored programs are designed to build confidence, sharpen skills, and achieve top results. From mastering challenging question types to improving time management and test strategies, we provide everything your child needs to excel. Our personalized approach ensures every student reaches their full potential. Join hundreds of successful students who have achieved their dreams with our guidance. Let us help your child unlock their future today!

Cone Penetration Test – 20 Ton Pressuremeter Test – 200 bar Packer Test Permeability Test – Falling / Constant Head Pump Out Test Plate Load Test California Bearing Ratio Test Vane Shear Test. Benkelman Beam Test

Leak Test Services - Pipeline leak detection is used to determine if and in some cases where a leak has occurred in systems which contain liquids and gases. Methods of detection includehydrostatic testing, infrared, and laser technology after pipeline erection and leak detection during service. Pipeline networks are the most economic and safest mode of transportation for oil, gases and other fluid products. As a means of long-distance transport, pipelines have to fulfill high demands of safety, reliability and efficiency. If properly maintained, pipelines can last indefinitely without leaks. Most significant leaks that do occur are caused by damage from nearby excavation equipment, therefore it is critical to call authorities prior to excavation to assure that there are no buried pipelines in the vicinity. If a pipeline is not properly maintained, it can begin to corrode slowly, particularly at construction joints, low points where moisture collects, or locations with imperfections in the pipe. However, these defects can be identified by inspection tools and corrected before they progress to a leak.  

Are you looking for the right software for your automation technology?    KSB makes life easy for its customers by providing a software package for servicing and commissioning automation solutions – including WIBU key download for optimum protection.   PACTware is a vendor- and fieldbus-independent software for operating field devices. KSB uses this software as a standardised service tool for automation products. With PACTware KSB customers can load drivers (so-called DTMs = Device Type Managers) for field devices from different manufacturers into the service tool. They will then be available for selection in an electronic hardware catalogue. Hardware requirements for the automation tool A laptop or similar can be used for the display and for setting parameters. It has to be connected to the field device via the RS232 or USB interface (only for PumpDrive 2/PumpDrive 2 Eco). PACTware requires a minimum of 100 MB hard disk space and 50 MB main memory. The laptop or PC should have a Pentium III 400 MHz processor and, ideally, an XGA graphics card. It further requires a Microsoft-compatible mouse or equivalent pointing device.   For laptops without RS232 interface, a converter from USB to RS 232 is used; once the converter has been connected to the USB2.0 interface and the corresponding driver has been installed, it serves as an RS232 connection. For PumpDrive 2/PumpDrive 2 Eco this converter is not required. Licence and copy protection with WIBU key Authorisation for changing parameters on the “Service” access level can be granted with a dongle. In order to protect the devices from being parameterised by untrained personnel, KSB uses a protective key (also known as dongle) by the company Wibu-Systems. Connection between parameterisation device (laptop) and terminal device via USB2.0 to RS 232 converter Customers using PumpDrive 2 or PumpDrive 2 Eco (0.37 kW - 4 kW from 31 July 2014) require a parameterisation cable (USB optical) for connecting the device to the laptop.

Get in touch with us, if you are looking for obtaining reliable solutions for Test Facilities Services.

ENVI ECOTECH SERVICES PRIVATE LIMITED. is specialized in offering Chemicals Testing Services in Faridabad, Haryana. We have advanced Analytical Laboratory for performance different types of Analytical Testing. The Chemicals Testing is a process that is performed to characterize of the quality of basic chemicals. We have been providing the quality analytical services since 2008. We offer a wide array of analytical testing services to support the chemical testing Services. Industries Process Chemicals Hydrochloric acid (HCL) Specific gravity Washing Soda Purity as NaoH % by mass Hydrogen peroxide (H2O2) Strength as H2O2 % by mass Phosphoric acid Purity (H3Po4) % by mass Bleaching Powder Available chlorine % by mass. Ammonium by Fluoride % Purity. Caustic soda Purity as NaoH % by mass Farmaline Active matter % Colour wash Active matter % pH Booster Purity Viscosity Reducer Active matter % Anti scalient Solid % , Specific gravity Phosphoric acid Specific gravity Lime(Calcium Oxide Cao% by mass) 1.Cao% by mass Silica Oxide (SiO2) % by mass. Jute Bags IS: 15138:2002 Hydrogen peroxide (H2O2) Strength as H2O2 % by mass Dithia Active matter % Ammonia Compounds Active matter % P.P.Bags with Linner IS: 14968-2001 LDPE Linner IS: 14968-2001 Seed Slurry Grain size.

Our dye penetrant test service offers reliable, non-destructive inspection to detect surface-breaking defects in a wide range of materials. We apply a visible or fluorescent dye to the surface, followed by a developer that reveals any cracks or irregularities. Our skilled technicians conduct thorough inspections and provide detailed reports, ensuring your components meet quality and safety standards. Committed to precision and efficiency, we help you identify and address potential issues, enhancing the integrity and reliability of your materials.

The pyrogen test is a critical assay conducted in the pharmaceutical and biomedical industries to assess the presence of pyrogens in pharmaceutical products, medical devices, and biological substances. Pyrogens are substances, typically endotoxins derived from the outer membrane of Gram-negative bacteria, that can induce fever when introduced into the bloodstream. Regulatory agencies mandate the pyrogen test as part of the safety evaluation process for pharmaceutical products and medical devices. Compliance with these regulations is essential for obtaining approval for product registration and market authorization.

• Testing Location: Mumbai, Maharashtra
• Tester Type: Portable Hardness Tester
• Product Type: Cylinder Block
• Usage/Application: Heat Treatment Unit
• Duration: 1-3 Days
• Material Type: Aluminium

Quality Testing: Manufacturers need to understand the predictable lifetime of their products to provide a warranty without expecting a significant number of failures. Early failures occur because of various types of issues that may happen during the manufacturing process. Our Electronic tests and burn-in process at the component level eliminate defective parts at the early phase of the product life to ensure product reliability.   Our Quality testing process includes Electrical and mechanical test of the board Inline 3D SPI Inline 3D AOI ICT Functional test at board level Functional test at system level

• Testing Type: Hydrostatic Pressure
• Application Type: Gas Industries
• Pipe Type: Refining Piping
• Pipeline Type: Multi Gas Distribution Pipeline
• Usage/Application: Gas
• Design Evaluation: At Production Level

When it regards to investing, everyone wants reliability, safety, and the best possible results. Only via testing can you prove that your products fulfil customers' requirements and adhere to industry, and regional standards. Total Hydra Solution Pvt Ltd is a Delhi-based services company that specializes in hydro cylinder testing. We serve both merchants and customers with our services. Once you select us, professionally qualified and educated testing specialists will arrive at your location with a fully calibrated test kit to assess your hydro cylinder's reliability and efficiency criteria. We are dedicated to maintaining all types of hydro testing services with cutting-edge technology, and a huge number of clients rely on us for increased productivity and lower maintenance expenses.

We are a prominent Valve Testing Service Provider based in Gurgaon. Our sophisticated test facility is reckoned as one of the most advanced valve testing facilities in India. Different types of tests such as Seat Leakage, Hydro Test, Calibration and many more can be performed on a variety of valves as per the requirement laid. Every test is performed according to set international standards to ensure complete client satisfaction. We have a team of experts for performing these tests under controlled conditions and with complete safety. The entire testing procedure is controlled and monitored in a separate control room.

VERTEX, a trusted leader in the certification industry, ensures the effectiveness, performance, and safety of your products. Our labs adhere to NABL ISO/IEC 17025:2017 standards, offering comprehensive testing for machinery, electrical equipment, and medical devices in line with IEC/EN and IS Specifications. With facilities in Pune and Delhi, India, we are equipped to handle diverse product testing needs. Additionally, we collaborate with partner laboratories both in India and internationally, providing extensive testing solutions to meet the unique requirements of our valued clients. Trust VERTEX for reliable and accurate product testing services.