Thermal Analyzers Dealers

• Brand Name: Analytical Technologies Limited
• Condition: New, Recycled
• Country of Origin: India
• Single material: foam plastics (other flat surface insulation material, plate), polyurethane, phenol, urine aldehyde, mineral wool (glass cotton, rock wool, mineral wool), cement wall
• Composite materials: glass composite CRC, cement enhanced polyphony board, sandwich concrete, fiber glass panel composite plate, paper cellular plate
• Technical parameters: Biggest test pieces size Long * width * thick: 300 * 300 * 50mm
• The precision of temperature control: 0.05°C
• Resolution: 0.01°C
• The maximum hot plate set temperature: 80°C
• Minimum of cooling-plate set temperature: room temperature
• Measuring precision: 3%
• Coefficient of thermal conductivity measuring range: 0.010
• Power supply: AC 220V

• Brand Name: Meter
• Country of Origin: USA
• Size: Width: 5.5 cm (2.17 in) Height: 4.0 cm (1.57 in)

Measures thermal properties of soil, concrete, insulation, food, plastics, lubricating oil, human tissue, and much more Improved algorithms increase accuracy New one-minute read times Measure thermal diffusivity and specific heat at a fraction of the cost ASTM 5334- and IEEE 442-compliant. The new TR-4 needle is designed specifically to IEEE specifications. Controlled heating ensures heat is constant Test setup easier than ever. Results displayed clearly Mini USB cable makes downloading data easier Automatically identifies the sensor you have plugged in and illustrates heating Extended battery life lengthens use time Portable: use in the field or in the lab Measure moist and frozen materials accurately Short heating times ensure no moisture movement Measures thermal conductivity of many fluids Robust sensor needles limit breakage Each sensor engineered for a specific material Automatically corrects for linear temperature drift Resolves temperature to ±0.001 ◦C

• Color: Grey
• Power Source: Electric
• Type: Thermal Conductivity Analyzer
• Warranty: 2Years

Honeywell 7866 digital thermal conductivity Analyzer used in factories for detecting the different types of gas flows particularly 

• Frequency: 50/60 Hz
• Voltage: 100 to 240 V AC
• Temperature: 0-50 DegC
• Display: LCD With Backlight
• External dimension: H240 x W192 x D213 mm
• Output Signal: 4 to 20 mA DC,0 to 1 V DC,0 to 10 m

Product introduction: Synchronous thermal analysis combines TGA (Thermogravimetric Analysis) with DTA (Differential Thermal Analysis) or DSC (Differential Scanning Calorimetry), in which we can get the information of TG and DTA or DSC in synchrony using the same sample during the same operation.Measure and research the following characteristics of the materials:DSC: Melting and crystallization, phase change, reaction temperature and heat, heat of combustion and specific heat capacity, etcTG?Thermal stability, decomposition, REDOX, adsorption and adsorption, free water and gesso content, ingredients proportion computation, etc Technical parameters: TGA/DSC   STA200  Synchronous thermal analyzer1. Temperature range: Room temperature ~1150°C (Can be extended to 1350°C)2. Temperature resolution: 0.1 °C3. Temperature fluctuation: ±0.1°C4. Heating rate: 1 ~ 80 °C / min5. * Cooling rate: 1 ~ 20 °C / min   optional cooling system6. Temperature control mode: Rising temperature, Cooling temperature, Constant temperature7. Constant temperature time : 0~300min   Can be set arbitrarily8. cooling time: 15min(1000°C~100°C)9. Wide range of weighing: 1mg~2g  (Can be extended to 5g)10. DSC measuring range: 0 ~ ±500mW11. DSC Resolution: 1μW12. Resolution: 0.1 ug13. Constant temperature and time: 0 ~ 300min Can be set arbitrarily14. Display: English characters liquid crystal display (LCD)15. Atmosphere: Inertia, oxidability, reducibility, static and dynamic16. Atmosphere device: Built-in gas flow meter, including switch two way gas and control flow volume  17. Software: Intelligent software can record TG curves automatically, Processing data and print experimental statements18. Data interface: RSS - 232 interface, special software (the software is free upgrades)19. Work Power: AC220V  50Hz20. Warranty: Three years, and the software is free upgrades

This system can be used to analyse Thermal Conductivity of Solids, Powders, Pastes or Thin Films This system works out of Hot Wire Method (Transient Hot Wire Method). While the 710 model can also analyse Thin Film the model 700 cannot. Both models would have a 5.7 inch colour LCD display and would have a two-channel RS-232C interface and a USB 2 channel output also. There are many probes to choose from like Box type proble PD-11N, Insulated Moisture-proof probe PD-13N, High Temperature probe PD-31N etc. The probe PD-31N can work from -100 to 1000 Deg C. The Thin film in 710 would be analysed in either a Box type probe or an Insulated Moisture-Proof probe.

Sinda uses a conductor-capacitor network representation approach to thermal analysis that offers numerous benefits when solving thermal problems. Sinda goes beyond other solutions by also providing a powerful thermal programming language, enabling engineers to construct complex thermal scenarios that would otherwise be difficult or impossible with other analyzers

Model 2020 Thermal Conductivity Analyzer is a versatile, explosion-proof, microprocessor-based instrument for measuring binary mixtures of gases. Model 2020 responds to the differences in thermal conductivity between various gases by continuously comparing the sample gas with a reference gas of known thermal conductivity.   Features • Customer selectable gas constituents; 11 gases, 110 combinations• 6 gas concentration alarm set points• Automatic linearization• Auto Ranging automatically selects the proper preset range for a given measurement. Manual override allows the user to lock onto a specific range of interest.• A 2-line alphanumeric display screen (VFD), driven by microprocessor electronics that continuously prompt and inform the operator• Proven sensor cell design• Auto and remote zero cal capabilities• ndependent zero and span correction• Two programmable alarm relays and a system failure alarm• Two way RS-232 serial digital port for use with a computer or other digitalcommunication device• Four analog outputs: two for measurement (0-1VDC and isolated 4-20mADC) and two for range identification• Extensive self-diagnostic testing at start-up and on demand with continuous power supply monitoring

• Voltage: 100 V to 240 V AC, 50/60 Hz

Thermal conductivity gas analyzer is a gas analyzer whichquantitatively measures gas concentration by utilizing a causalrelationship that the temperature of a heated platinum wirechanges with gas concentration.

• Application: Industrial Use
• Features: 60 series detectors DSC & DTG available with optional auto sampler, Full control upto 4 detector modules through a single PC, Analysis under inert & reactive atmosphere possible
• Brand: Toshvin
• Model: DTG- 60 Series

Designed to detect a specific impurity in a binary gas mixture, the 212R is also well suited for monitoring one component in more complex mixtures where the other gases have the same ratio to each other or have similar thermal conductivity coefficients.  

We are leading supplier of quality DSC Sample Pans, Consumables for your all Thermal Analysis like TA INSTRUMENTS, PERKIN ELEMER, and METTLER. We offers an extensive selection of DSC Sample pans in addition to general DSC, TGA, TMA & DMA thermal analysis consumables, accessories and instruments.  

The C-Therm TCi Thermal Conductivity Analyzer employs the Modified Transient Plane Source (MTPS) technique in characterizing the thermal conductivity and effusivity of materials. It employs a one-sided, interfacial heat reflectance sensor that applies a momentary constant heat source to the sample. Typically, the measurement pulse is between 1 to 3 seconds. Thermal conductivity and effusivity are measured directly, providing a detailed overview of the heat transfer properties of the sample material.

Thermal analyzer apparatus has found wide acceptance in the plastic industry for quality control and basic material characterization. Thermal analysis techniques are used to study the behaviour of materials towards the heat as a function at temperature and time. Applying this technique we can get quantitative information and many aspects of the material's reaction to heat.  

• Type: Thermal Analyzers
• Condition: New
• Brand Name: Hitachi

New X-MET8000 Expert GEO AnalyZer   Model : 8000   -New Hitachi Oxford Expert XMET 8000 XRF Analyzer Alloy Gold Mining 2 Year Warranty -In new working and cosmetic condition. Never used. Complete kit. See pictures. Also includes a test stand -Analyzer comes with 24 months warranty -Alloy,Precious Metal,Goods,ROHS,Soil & MIning Mode   X-MET8000 Expert GEO Analyzer   • Mining Mode • Customer empirical or FP calibration • CMOS Camera • CRM SS316 check sample • Li-ion battery 6.2 Ah,2 pcs • Charger set • Set of 5 thin Prolene windows 1pc • Carrying case, foam and box • Background plate • Neck/shoulder lanyard • Wrist strap • Light radiation shield for the analysis of Al alloys and plastics • USB memory stick (8Gb) containing the backup file and Windows drivers • USB cable

thermal analyzer, Analytical Balance, pH Meter, Platform Scales

thermal analyzer, Laboratory Fermenter, HPLC, c d spectrometer, Polarimeter