Thermal Fluid Heaters Dealers

High durability The Thermic Fluid circuit permits the transfer of energy at high temperature without the risk of corrosion or pressure. Three Pass Reverse Flame Technology - Ensures complete combustion. Consistent Thermal efficiency of 88% - Ensures low fuel bills. Larger Tube Diameter of Coil - Ensures longer life of the coil. High Unit Dependability - All critical components are of reliable make.

• High Efficiency: High Temprature
• Low Fuel Cunsomption: Suits for Refinery, Food Industry

We are offering wood fired thermic fluid heater, coal fired thermic fluid heater etc. Wood coal petcock fired 4 pass semifully automatic vertical double coil unit type thermic fluid heater. Capacity 4 lac kcal & up to 10 lac kcal.hr.

• Capacities: From 2 LacKcal/hr to 30 Lackcal/hr
• Firing fuels: coal, wood, sawdust, Husk, baggase, agro waste

We offer thermic fluid heaters, fired by a wide range of fuels. Our TFH are available in both solid fuel firing as well as oilgas firing versions so that user gets the advantage of economically available fuels. All TFH are made with a coil type design ensuring instant heat. We offer fuel options of heavy oil, light oil, gas, dual fuel, wood, coal, husk, bagasse and other agro-waste fuels.

Description Thermic Fluid Heaters are forced circulation liquid phase heating system. In the system heat transfer media circulated in a closed circuit through heat heater. The same thermic fluid is reheated and recirculated. The combined expansion cum dearator tank system pressureless and vapourless. The unit basically with 3-Pass Construction. The Thermic Fluid Heating system operates near atmospheric pressure and temperature can be achieved as high as 300°C. Heater assembly consists of a nest of concentric helical tube coils place within a sturdy MS shell. The coils fabricated out of seamless tube high temp. Application allow flue pass to ensure maximum heat dissipation. Application · Textile · Chemicals· Plastic & Rubber· Timber· Metal Finishing· Drying Food Industries· Packaging· Confectionery· Printing etc. Features · The furnace is constructed from Heavy Duty M.S. Sections and covered with M. S. Sheets on one side of the furnace is provided with necessary doors for husk/wood feeding, Emergency by-pass chimney.· Heat exchanger is fitted to the furnace.· The inside of the furnace is constructed with best quality fired bricks & insulation bricks.· The fire bars manufacture from the heat resisting casting are provided.· High combustion efficiency.· Low stack temperature on full load.· No corrosion or scale formation.· Efficiency 76% on GCV.· 60% Benefit fired Diesel/Gas & LDO.· Low Maintenance.

• Automatic Grade: Automatic
• Application: Industrial

We are specialized in providing an assorted range of Thermal Fluid Heaters in the industry. Our range of Thermal Fluid Heaters comprises Oil and Gas Fired Thermal Fluid Heater, Solid Fuel Fired Thermal Fluid Heater, Electric Thermal Fluid Heater, etc. These Thermal Fluid Heaters are corrosion resistant and are easy to operate. Backed by advanced features, these thermal fluid heaters are pollution free and easy to maintain. Apart from this, we are considered as one of the chief manufacturers of Thermal Fluid Heaters.

• Size: 6 LKcal/Hr
• Connecting: Food Products, Asphalt Plantt
• Firing Mode: Wood, Coal
• Rating Working Pressure: 6 Bar
• Brand Name: Burner India
• Material: Mild Steel
• Application: Industrial, Heating
• Feature: Durable, Easy Installation, Minimal Maintenance, Stable Performance
• Type: Wood Fired Thermic Fluid Heater
• Fuel: Solid
• Structure: Vertical
• Country of Origin: India
• Temperature: 250-300°C
• Maximum Temperature: 300
• Heat Output: 6LKcal/Hr

• Material: Stainless Steel
• Weight: 3
• Feature: Durable, Noiseless Operation
• Automatic Grade: Automatic
• Power Source: Coal
• Temperature: 100-150°C

In Sugar factory the massecuit going to the centrifugal machine (‘C’ massecuit in particular) should be at a specific temperature so as to minimize its viscosity and to avoid overloading of centrifugal motor. Massecuit is cooled in crystallizer to extract maximum sugar from molasses but the disadvantage of cooling is, massecuit while cooling gets more viscous, sticky & does not flow freely up to the centrifugal machine. The machine also gets ununiformly overloaded, thus it’s purging capacity reduces. To overcome all these problems there arises the need of a heater that raises the temperature of massecuit. The heater should fulfill following things. The heater design should be such that the massecuit gets heated quickly during its transit time from pug mill to centrifugal machine. If not then the problem of raise in molasses purity arises.  The heater must have minimum retention time.  The heater should be dimensionally small and compact so that it can be fitted above the centrifugal machine, below pug-mill.  The most important is that the heater should have minimum maintenance. Heating media for the heater should be such that the co-efficient of heat transfer should be high so that the massecuit gets heated quickly during transit time through the heater.  ‘VISHWA’ Transient Heater fulfills all the above points so it can be really called as ‘TRANSIENT HEATER’.Heating media in all conventional Transient Heaters is hot water. The co-efficient of heat transfer from liquid (hot water) to semi solid i.e. massecuit is very less, but that of vapour to liquid is very high. Vapours when get condensed a large amount of ‘Latent Heat’ is released. ‘VISHWA’ Transient Heater is designed, based on this phenomenon.Working Principle Self-generated low temperature vapours are used as heating media in ‘VISHWA’ Transient Heater. Input energy required to run the Heater is only about 20 Kgs. of 100 PSIG. steam per hour. Heat energy of steam is transferred to the distilled water (Condensate) filled in the part of heater called ‘Vaporizer’. Condensate in the vaporizer gets evaporated and vapours are produced. These vapours are used as heating media in the Transient Heater which circulate through S.S. tubes and get condensed again after letting out the latent heat to the massecuit.Condensate flows back in to the vaporizer and again vapours are produced. This is how massecuit heating continues in Transient Heater. The heating media loop is completely sealed and kept under vacuum to generate vapors at low temperature and heater becomes self regulating of maintenance free.Here regulating the steam supply to the vaporizer controls the vapour temperature.

• Type: Automatic
• Material: Alloy Steel
• Certification: CE Certified
• Application: Industrial
• Power Source: Thermal Power
• Temperature: 100-150°C

• Material: Mild Steel, Stainless Steel
• Application: Domestic, Industrial, Machinery
• Color: Brown, Grey, White
• Automatic Grade: Automatic, Fully Automatic
• Power Source: Coal, Gas
• Feature: Double Chamber, Durable, Easy Installation, Fully Insulated, Minimal Maintenance, Noiseless Operation, Single Chamber, Stable Performance
• Finish: Paint Coated

• Firing Mode: Semi Automatic
• Maximum Temperature: 300 Deg C
• Capacity: 1lakh kcal/hr to 30 million Kcal/hr
• Design Thermal Efficiency: 90%
• Frequency: 50/60 Hz
• Finish: Painted

• Features: Excellent performance ,Low power consumption ,Longer service life

• Material: Alloy Steel
• Certification: CE Certified
• Application: Domestic, Industrial, Machinery
• Weight: 100-1000kg
• Color: Metallic
• Automatic Grade: Automatic
• Motor Power: 1-3Hp
• Feature: Double Chamber, Easy Installation
• Temperature: 100-150°C, 150-200°C

Solid fuel fired thermic fluid heater has two sets of coils. One is provided above the furnace to take advantage of radiant heat exchange and other set is used to carry out convective heat transfer. The thermic fluid is recirculated from process in closed loop with the help of the circulation pump. Product Range : From 1,00,000 kcal/Hr. to 50,00,000 kcal/Hr. Temperature upto  300oC. Fuel - Coal, wood, lignite, briquette, agro waste such as bagasse, husk. Firing - Manual as well as automatic with bubbling bed or fluidised bed combustion. Salient Features : Excess Air optimisation - Radiant Heat Exchange is carried out above the furnace  Hence, less excess air is required and ultimately increase efficiency. Air preheating - Combustion air from FD fan passes through air preheater that absorbs the waste heat in the fuel gases. It ultimately results in increase in efficiency. Balanced Draught System - It means reduction of infiltration of unwanted air though fire gates of minimum level. It results into maximum heat recovery from air preheater and assures greater efficiency.

• Warranty: 1 Years
• Type Of End Use: Sugar Plant
• Capacity: 10 Tons
• Material: Mild Steel

We are hugely appreciated in the domain of manufacturing, supplying and exporting the best class of Coal Fired Thermic Fluid Heater in India and overseas. These durable heaters are developed by our deft professionals employing cutting-edge technology and finest materials to provide better efficiency, user-friendly operations and maximum safety. Moreover, they are available in various specifications at market-leading prices. we successfully deliver every consignment in time. Features :  Color  -  Black, Silver, Blue, Green  Style  -  Vertical  Output  -  Steam

• Capacities: From 2 LacKcal/hr to 30 Lackcal/hr
• Firing fuels: coal, wood, sawdust, Husk, baggase, agro waste

We offer thermic fluid heaters, fired by a wide range of fuels. Our TFH are available in both solid fuel firing as well as oilgas firing versions so that user gets the advantage of economically available fuels. All TFH are made with a coil type design ensuring instant heat. We offer fuel options of heavy oil, light oil, gas, dual fuel, wood, coal, husk, bagasse and other agro-waste fuels.These models are designed for maximum efficiency, using a variety of solid fuels including agro-waste fuels. It allows high process temperatures at low operating pressures.

Solid fuel thermic fluid heater thermic fluid/thermal oil heater is designed for maximum efficiency, using a variety of solid fuels including agro-waste fuels. It allows high process temperatures at low operating pressures.   Product Features          For fuel such as coal, wood, sawdust baggase, etc.          Option of Trava grate/inclined water-cooled grate/flat grate, etc.          Standard capacity range from 2.0 lack kcal/hr up to 40 Lack kcal/hr The combustion system for solid fuels consists of fuel handling and stoking equipment, refractory lined chamber, air and flue gas handling system (including draught, forced draught or balanced draught) with blowers and pollution control equipment. The furnace construction is done on site. It includes foundation, fabrication and erection of supporting structure, building up refractory chambers, fixing up firing doors, ash doors, access doors, fuel feeders, support bars for grates, grate bars, etc.   Operating Range          Capacities: From 2.0 to 40 Lack kcal/hr          Operating temperature: Up to 325 deg. C                     Firing fuels: Solid fuels/agro-fuels