V-4-PASS THERMIC FLUID HEATER
1,000,000 - 8,100,000 Per SET
1 SET (MOQ)
Vertical Four Pass Thermic Fluid Heater is combustion grate that gives you an assurance of the rated output on any solid fuels like coal, wood, lignite, husk, briquettes, pet coke, saw dust, bagasse, etc. without compromising on performance & efficiency. This reduces downtime leading to further increase in profitability.Every solid fuel has different physical and chemical properties which influences the design and performance of the furnace in Thermal Fluid Heater. Different combustion systems are shown in above diagrams.Low grade fuels are best handled using FBC technology to give good results. Thermal's unique design for efficient combustion suits different solid fuels like coal, lignite, wood, husk, pet coke, bagasse and biomass fuels resulting in to low operating cost, trouble free operation and lesser maintenance husk, agis best suited for some fuels with high ash content like low grade coal, paddy ro wastes etc.FBC technology ensures complete combustion, helps homogeneous mixing of fuel, maintains uniform bed temperature and leaves low un-burnt fuel guaranteeing 5 to 7% higher efficiency than any other combustion system.Options of In-Bed Tubes in Furnace is also available to control bed temperature & system performance.Fluidized Bed Combustion Technology is best suited for fuels like low grade coal, imported coal, paddy husk, petcock, etc with Auto feeding system of Over bed & Under bed into Furnace Salient Features: Multi Fuel Fired System Cost Efficient Unit Also with Latest FBC System Automatic Firing of Solid Fuel as similar to Oil & Gas
Vertical Oil & Gas Fired Three Pass Thermic Fluid Heater
Get Price Quote
1 Set (MOQ)
Best Deals from Thermic Fluid Heater
Gas Fired Thermic Fluid Heater
200,000 Per piece
1 piece (MOQ)
ZVL Series 4 Pass Thermic Fluid Heater
350,000 - 2,500,000 Per Piece
1 Piece (MOQ)
ZVL SERIES– 4 PASS Heat output Range F 1000, F 1200 And F 1500. · This series is specially design for achieving maximum heat transfer area with the provision of genuine four pass flue gases travel. · ZVL series given 80 ± 2 % efficiency with solid fuels like wood, coal, briquette, wood pallet, rise husk and all type of agro west. · This series having limited models for the purpose of special applications. · Complex structure of this series is design with easy maintenance by proper cleaning.
Gas Fired Thermic Fluid Heater
250,000 - 2,450,000 Per Piece
1 Piece (MOQ)
Ø Capacity Range: 1 to 20 Lac Kcal/hr Ø Temperature of Thermic Fluid at outlet up to 280 °C (Expandable up to 320 °C) Ø Fuel Variant: LPG, PNG Ø With Burner India Made High Quality burners Ø Efficiency: 88±2 % Ø Provision of Advanced wet back Design to achieve maximum efficiency Ø Suitable for applications in industries like Pharmaceutical Industries, Food Industries, Dairy Industries, Packaging Industries, etc.
Thermic Fluid Heater
100,000 - 3,500,000 Per Piece
We are recognized among the major oil and gas fired thermal fluid heater manufacturers in india. The oil and gas fired thermal fluid heaters offered by us are accessible in vertical and horizontal types. They have the burner control of single stage, two stage, and step less modulating. product range capacity coil type – 50,000 to 5,000,000 kcalhr. temperature - range 300°c for standerd unit and 350 & 400°c for high temprature fuels - ldo, hsd, fo, lshs, natural gas, lpg, biogas. Efficiency -overall efficiency of 88 % (+-2%) on ncv special features 1. high efficiency—less fuel consumption. 2. single button start stop with automatic control with safety features. 3. noiseless operation with monobloc burner 4. smokeless combustion. Low pollutants. 5. no explosion hazards due to coil design.
Protex cooking heater champion
295 - 325 Per piece
100 pieces (MOQ)
Protex cooking heater champion manufacturer Amrit electrical home appliances Ghazaibad
3 Pass Thermic Fluid Heater
900,000 Per Piece
1 Piece (MOQ)
Thermic Fluid Heater
Get Price Quote
1 Piece (MOQ)
Thermic fluid heater is designed for maximum efficiency, using a variety of solid fuels including agro-waste fuels. It allows high process temperatures at low operating pressures.Features : For fuel such as coal, wood, sawdust bagasse etc Option of Traveling grate/inclined water-cooled grate/flat grate etc Standard capacity range up to 3 million kcal/hr The combustion system for solid fuels consists of fuel handling and stoking equipment, refractory lined chamber, air and flue gas handling system (including draught, forced draught or balanced draught) with blowers and pollution control equipment. The furnace construction is done on site. It includes foundation, fabrication and erection of supporting structure, building up refractory chambers, fixing up firing doors, ash doors, access doors, fuel feeders, support bars for grates, grate bars, etc. Fuel – coal, lignite, agro-waste/ bio-mass, wood Simple, more efficient space saving design Radiant/ convective coil & cyclonic combustor designs up to 1.5 million kcal/hr. Choice of furnaces to suit different fuel firing and fluidized bed combustion technology for complete Combustion of low grade fuels Low operating cast, state-of-the-art controls and safeties Compact Deaerator cum Expansion tank Typical applications- textiles, plywood, chemicals, food, edible oil, rubber, leather etc.
Thermic Fluid Heater
100,000 - 500,000 Per piece
1 Piece (MOQ)
A thermic fluid heater is industrial heating equipment, used where only heat transfers are desired instead of pressure. In this equipment, a thermic fluid is circulated in the entire system for heat transfers to the desired processes. Combustion process heats up the thermic fluid, and this fluid carries and rejects this heat to the desired fluid for concluding the processes. After rejecting it, this fluid comes back again to the thermic fluid heater[1][better source needed] and this cycle goes on. Thermic Fluid Heater are essential to the day to day operations of facilities in the asphalt industry, refinery industry, tank terminal industry, wastewater treatment industry and beyond. Organizations in these, and other, industries rely heavily on hot oil heating systems to get the job done.
thermic fluid heat exchanger
50,000 - 250,000 Per piece
100 Piece(s) (MOQ)
Thermic Fluid Heater
3 - 7 Per
1 Piece (MOQ)
A Thermic fluid heater is Industrial heating equipment, used where only heat transfers are desired instead of pressure .In this equipment, a thermic fluid is circulated in the entire system for heat transfers to the desired processes. It’s capacity : 1 lac K cal/hr to 6 lac k cal/hr.
Bamboo Board Thermic Fluid Heater
Get Price Quote
1 piece (MOQ)
Description The “Bamboo Board Thermic Fluid Heater” by Prashant Bamboo Machines is a reliable heating system specifically designed for bamboo board production. This heater utilizes thermic fluid, a heat transfer medium, to provide consistent and efficient heating for various stages of the manufacturing process. With its advanced technology and precise temperature control, the thermic fluid heater ensures optimal conditions for drying, curing, and other thermal processes involved in bamboo board production. It helps to enhance production efficiency, reduce energy consumption, and maintain the quality of the final bamboo boards.
Solid Fuel Fired Vertical Thermic Fluid Heater
500,000 - 500,000 Per Piece
1 Piece (MOQ)
Solid Fuel Fired Vertical Thermal Oil Heater with Cyclonic Combustor
Coal Thermic Fluid Heater
300,000 Per Piece
1 Piece (MOQ)
0.0
Website
Electric Thermic Fluid Heater
648,000 Per Piece
1 Piece (MOQ)
Thermic Fluid Heater
Get Price Quote
With our inventory management system, we are capable to undertake urgent and massive requirements of the buyers at a time. As we ensure complete safety of the products at our end, we follow stringent and organized warehousing system in our state-of-the-art warehouse. Moreover, the system is supervised by experts. Specifications : Design, Erection & Commissioning of TFH using briquette as fuel replacing LDO, HSD and F.O etc is done by us Thermic fluid which acts as a heat carrier is heated up in the coil and circulated through the user equipment Arrangement of furnace on that radiation & convective coil are mounted so that heat transfer takes place from flue gas to oil, ultimately oil reaches to 250 to 280 Deg. C to provide required energy to client’s application Gas purification unit i.e. Cyclone or Ventury scrubber is mounted between W.P.H and I.D. fan, this adjustment is done if required according to PCB norms Note : Change in temperature can be done according to the client’s requirement (i.e.Kcal ) Advantage Of TFH : Closed system cycle operation with minimum losses as compared to steam boilers High steam pressure can be replaced by TFH because boiler system becomes bulky at high steam pressure Non pressurizing system, operation even for temperature around 250 to 280 deg C can be achieved
thermic fluid air heaters
Get Price Quote
Thermic Fluid heated air heaters for heating air using thermic fluids like Shell Thermia, Marlotherm, Dowtherm, Hytherm and other petroleum oils as heating medium are manufactured using root soldered wire wound fin tubes. Our designs result in economical designs coupled with low air side pressure drops.Thermic fluid air heaters made by us are being used in dryers in coated paper industry, steel strip coating and finishing lines, chemical and dye dryers.Base tubes of carbon steels, stainless steel 304, stainless steel 316 and other stainless steel grades finned with galvanised mild steel, copper and stainless steel fins are used in fabrication of air heating exchangers. The body material used so far is carbon steel and stainless steels.
Thermic Fluid Heater
550,000 Per Piece
1 Piece (MOQ)
Thermic Fluid Heater
400,000 - 20,000,000 Per Piece
1 Piece (MOQ)
Thermic Fluid Heater Multifuel Concept : Guaranted output on low grade coal and lignite with GCV upto 3800 Kcal/Kg. Agricultural Wastes such as rice Husk, Bagasse, Groundnut shell, Saw Dust etc. Highest Efficiency : The combustion chamber dimension and grate area are suitably designed for maximum combustion efficiency on low grade fuel. This system is easily accessible and large heating surface of Thermo Energy Systems heater and air pre-heater assures on unmatched efficiency f76%(on GCV of coal having 5000kcal/Kg.) Low Power Consumption: Unique design of Thermo Energy Systems heater ensures lowest power consumption over any other competing system available today. Availability: Against Order Product Description Details Absolute Safety: External Combustion chamber ensures longer life of heater coil and thermic fluid. No radiation energy is transferred to heater coil in case of power failure ensuring complete safety. Diesel engine driven pump is not required for Fluid tech heater as compared to vertical systems. External Furnace: Coal/Lignite is burnt in an external furnace which results in an elimination of any possible hazard to the thermic fluid heater coil. A flue by-pass system is attached for the protection against power failure. The entire furnace is provided with steel casing and the combustion chamber is constructed with best quality high heat duty fire bricks and insulation bricks. Mineral wool insulating panels help minimum heat loss. Safety Controles and Instrumentation : Digital Electronic indicator cum controller forward/return temperature for ID fan off. Electronic stack temperature controller shuts of the unit in case of abnormally low temperature. Electronic low level controller in expansion cum deareated tank shuts off the unit in case of low thermic fluid level in tank. Electronic forward high temperature safety controllers shuts off the unit case forward temperature exceeds than minimum recommended temperature. Differential pressure switch shuts off in case of abnormal fluid flow conditions. Pressure gauge for inlet pressure measurement. Pressure gauge for circuit pressure measurement. Audio visual alarm for abnormal operating conditions. Optional Features : Coal cum oil firing system to change over from one fuel to another with minimum down time. Automatic by-pass damper with electromagnetic or pneumatic device. Modulating damper or variable speed drive to control combustion under all operating conditions.
Post Free Ad
