Thermocouple Compensating Cables Dealers

• Type: K
• Feature: Fine Finished, Quality Tested
• Insulation: PTEE.
• Colour: As per international standard colour code
• Shielding Material: SS, SPC, Varnish Fiberglass, or as per Customer requirement
• Size: As per Standard or Customer specific requirement

The company is a major Manufacturer and Supplier of PTFE Thermocouple Compensating Cables. The company is offering different types of PTFE Thermocouple Compensating Cables for different working conditions with certain operating requirements being taken into account as well. The PTFE Thermocouple Compensating Cables are quality-assured products known for their high durability. Details Wire used in a thermocouple from the point of sensing the temperature to the point of cold junction compensation (CJC end) where the signal is measured A sensor for measuring temperature that consists of two dissimilar metals that are joined together at the sensing end Different thermocouple types (e.g. J, K, T, E, etc) use different mixtures of metals in the wire Create a low voltage signal and its application should be avoided near power wires, motors, etc. In order to minimize noise pickup, a metal over braid or twisted shielded wire is used in the design

As we are the name on which the customers lay their trust for quality, as we are supplying the finest Thermocouple Compensating Cables. Keeping in compliance with the international standards, we ensure that the raw materials used for varied products are 100% certified and quality approved. This helps us in maintaining a set standard of our products.

• Material: PVC
• Brabding: Ss Breaded/ Copper
• Insulation: PVC
• Size: 0.5 SQ MM
• Temperature Range: Up to 1200 deg C
• Diameter: 1-20mm

We manufacture and export high quality Compensating Cables to our clients all over the world. Our Compensating Cables are used to extend circuits from the sensor to reference unit. Compensating Cables are fabricated by using the best quality raw materials that ensure longer working life. Our Compensating Cables are extensively used in electronic industry to facilitate proper flow of current. We offer Compensating Cables in varied thickness and technical specifications to meet the needs of our clients. Attributes Heat and temperature resistant Reliable Long lasting Cost effective

• Temperature Range: -40 to 105°C

Thermocouples and pyrometers are electrically conducted by the thermocouple extensioncompensating cables. It is essential that the cabling uses the same conductive material as the thermocouple itself. This is to ensure similar thermo-electric (e.m.f) properties as that of the thermocouple used for sensing the temperature. If there is not a match in thermo-electric properties between the cable and the thermocoupling accurate temperature measurement will not be possible.That is why Relemac puts such stringent quality control measures into their design and manufacturing processes. Our thermocouple cables are manufactured using the following standards:- IS: 8784, ANSI-MC 96. 1, B.S., IEC, JIS, ENI, DIN .Thermocouple cables can also be manufactured according to customer specifications for custom applications if none of our stock cable meets the desired criteria.

• Material: Plastic
• Length: 3.5mtr, 4mtr
• Color: Multicolor
• Feature: Durable, Quality Tested
• Power Source: Electric
• Tenmperature: 100-200 Deg C

• Material: High quality raw material
• Condition: Good
• Product Name: K Type Compensating
• Brand Name: Tanya
• Place Of Origin: Meerut,U.P

We are offering k-type compensating (tef,f.g,). keeping in view the specific requirements of various industries, we have a wide range of thermocouple cables with different specifications. The thermocouple compensating cables are manufactured using the latest sophisticated technology to ensure high durability and enhanced performance. The insulated thermocouple cables are insulated properly to ensure total safety. Their endurance towards temperature is extreme. The raw materials used in the manufacturing of the thermocouple cables are of the best quality. We stand among the prominent exporters of premium quality thermocouple cables based in india. extension cables are manufactured from conductors having the same nominal composition as well as the same emf output as those of the corresponding thermocouple. Letter ‘x’ following the designation of the thermocouple, e.g. Kx, denotes these cables. compensating cables are manufactured from conductors having different composition from the corresponding thermocouple but have similar emf output over a limited temperature range (generally 200°c). Letter ‘c’ following the designation of the thermocouple, e.g. ‘kc’, denotes these cables. we manufacture rtd, thermocouple extension and compensating cables with the ptfe (teflon®) and fibre glass insulation. We make following constructions commonly with parallel as well as twisted form. ptfe/ ptfe ptfe/ ptfe/ ss braided ptfe/ (spc/ npc/ bc) braided/ ptfe ptfe/ ptfe/ fibre glass fibre glass/ fibre glass fibre glass/ fibre glass/ ss fibre glass/ fibre glass/ ptfe we manufacture the above insulated cables as per the requirement or specifications of the customer with insulating material ptfe and fibre glass. we manufacture 2 core, 3 core, 4 core and 6 core rtd cables with above mentioned constructions using best quality bare copper, silver plated copper and nickel plated copper conductors.

• Material: PVC
• Color: Available In Different Colors
• Power Source: Electric
• Feature: Fine Finished, High Strength, Quality Tested
• Type: Thermocouple Compensating Cables
• Country of Origin: India

Thermocouple Compensating Cables are the extension leads mostly used in glass industry, low temperature & cryogenic applications and reducing atmosphere. The cables are made from different metals but with similar EMF output in the range of 0 to 100 degree Celsius. Widely used to connect the thermocouple metal junction and measuring instrument, these compensating cables are considered as the best solid conductor leads. In the cables, varied EMFs are generated with different metal pairs that are further proportional to hot junction and the point where it is measured. All these cables are available in different color codes or cores and sheathing as per the international standards.   Other details: Extension leads of different metals but having similar EMF output between 0°c to 100°c connected between Thermocouple metals junction and the measuring instruments are called compensating cables which are generally recommended as solid conductor leads.   Application: Different metal pairs generate different EMFs which is proportionate to the hot junction and the point where it is measured. Common combination of thermocouple metals.   Available Range: K-Chromel/AIumel-Most commonly used. T-Copper /Constantan- for low temperature & cryogenic applications. J-Iron/ Constantan-Used in reducing atmosphere E -Chromel/ Constantan-Highest EMF output. R-(Platinum-13% Rhodium)/ Platinum & S-(Platinum-10% Rhodium) / Platinum-very High temperature measurements. B- (Platinum-30% Rhodium)/ Platinum mainly used in glass industry. Different color codes of cores and sheathing as per international practices are used to denote the various thermocouple cables.

• Type: Cables
• Material: Plastic
• Length: 2.5mtr, 3.5mtr, 3mtr, 4mtr
• Color: Mulit Colour
• Application: Industries
• Power Source: Electric
• Feature: Durable, Fine Finished, High Strength, Quality Tested

We are counted among the leading names for manufacturing, exporting and supplying of Compensating Cables from Delhi, India. Our quality controllers ensure the quality of raw material prior to manufacturing Compensating Cables, thus our products always stand tall on all the quality parameters. Compensating Cables, that we offer, are used in various industries for different applications. Approach us, for availing Compensating Cables at pocket friendly rates.

We are offering compansating cable.