Thread Chaser Tool Dealers

To keep a strict check on the quality of the products, we have hired professional quality analysts having rich domain experience. Our fast and modern transit facilities enable us to deliver the orders within the stipulated time frame.   We are manufacturing Ground Thread Linco Chasers with best grade of High Speed Steel. Threading of these chasers are done by best quality of oils, grinders and imported machines after proper heat treatment. We also manufacture special / customized chasers as per demand. NPT, BSPT , Left hand , ACME , SQUARE , KNUCKLE Threads, HSS Cobalt M35 , M42 ,M48 chasers are also available with us in plastic box packing. Quality features of SEECO Chasers are: Long life of chasers because of ground thread. Accurate alignment of all 4 pcs/set. Better production and finishing than milled thread chasers. Accurate Depth of each set. Hardness of each set is as per its respective Thread and Working. Zero Breakage of SEECO chasers are one of its best feature. We also provide chasers in coated form.

• Country of Origin: Made in India
• Application: For Bolt And Pipe Threading
• Material: H.S.S. M2, M35, M42
• Surface Finishing: Standard
• Brand: LTI

Restore damaged threads on shafts, housings, cages, etc., for re-assembly of matching parts. Eliminates need for thread-cutting equipment. Will not harm threads. V-pads and dies can be replaced. Cap. 1 1/4" to 5" O.D.    

Fostered with rich industry familiarity and a highly knowledgeable team of professionals, we are offering Threading Chaser that are simply altered cutting angle to suit diverse materials. Our chasers are manufactured using well tested basic material and progressive technology in organization with distinct industrial standards. Clients can procure these enhanced quality chasers from us in many specifications and at market-leading prices.

• Grade: En
• Application: Pipe Threading Machine
• Blade material: Carbon Steel
• Surface Finish: Coated
• Quality: Best
• Pack type: Box

Widely used to find out the solutions pertaining to the technical problems faced by the industries, our HSS Threading Chasers are in huge demands. Our High Speed Steel Threading Chasers are resistant to Less wear and tear thus need low maintenance. We are well reckoned as one of the overruling Thread Cutting Chasers Exporters in India.   Technical Specifications : Suitable for Lanco, Landis, Landmatic and Landex Die Heads. All threads available. Available in sizes :  1" x 1/2" 1.1/8" x 5/8" 1.5/8" x 3/4" 2.1/8" x 15/16" 3" x 1.3/64" 4" x 1.3/64" 4" x 1.7/64" 4" x 1.1/4" 4" x 1.1/2" 5" x 1.1/2" 5" x 2.1/4" (Set of 4 Pcs) 5" x 2.1/4" (Set of 6 Pcs) 6" x 2.5/8" (Set of 6 Pcs)

• Model Number: .
• Packaging Details: Wooden packaging (on request)
• Port: MUMBAI
• Supply Ability: AS PER YOUR REQUIREMENT

We are Manufacturers the chaser suit for Lanco, landies, Landmatic, Landex, kandai & Gents, heap Die Head, Wagner, Redilmatic Die head and Also Manufacturer as per customer's requirement as per drawns or sample. Principle Advantages of Tangetial Chasers : Thses are lomg life permanent throat, ability to work, close to a shoulder throughout the life of the chasers and easily altered cutting angle to suit different materials. Tangential to suit different materials. Tangential chasers have a self guiding action, execpt when ground across the entire width of the die or when used with lead screw feed. Regrinding : When dull these chasers are reground only in the cutting edge and never on the throat. The edge is completely renewed at each regrinding so the same results can be obtained from reground. Diameter Threading : One set of chasers can be used to thread different diameter of the same pitch, provided th helix angle of the thread being cut and that of the chasers-holder do not vary more than half a degree above or below for standard thread forms. For accurate work the variation in the lead angle should not be overlooked. Left Hand Threading : The same Chasers can be used for left-hand and Right-hand threads. For left-hand threads the chasers are ground on the end oppsite to that for right hand thread. Left hand chaser holders are required for left hand work and the chaser must be inserted in numerical order, but anticlockwise when facing the diehead .The Machine must be reversed for the lefthand work. Marking on chaser : Each Phoenix Tools tengential chasers is marked. The diameter is not usually marked because the same chaser may be used for the threading different diameter. Type to suit Various materials : This is determined by the cutting edge, known as the Rake Angle, which varies according to the nature of the material to be threaded, its machinability, the thread to be cut and the method of feeding the work into the diehead. The following are given as a guide, but Rake angles should be finally determined by the experiments. Throats : Phoenix Tools Tangential chasers are supplied with one of five standard throats that are 1) 45 (no throat), 2) 30 throat, 3) Standard short throat 20, 4) Long throat15, 5) Extra Long Throat 12,

• Application: Industrial
• Country of Origin: Made In India
• Brand Name: Poonam Industries
• Material: High Speed Steel
• Length: 5 inch
• Thickness: 4mm
• Width: 3 inch

• Coating: PVD
• Material: Tungsten Carbide
• Application: External Turning Tool
• Key word: Chaser

Thread Chaser Tool, Digital Paper Roll Hardness Tester, Digital Gauss Meter

HSS Threading Chasers, Cutting Tools, Bottom Cup, Swivel Coupler

Split Die Thread Chaser Tool

threading chaser, rock cutter, Vitrified Grinding Wheel, Cutting Saw

threading chaser, Bar Threading Machine, Cutting Tools

threading chaser, Single Wedge Coupler

HSS Threading Chasers

Thread Chaser Tool, Tungsten Carbide Punch, Precision Grinding Service

Thread Chaser Tool