Three Phase Vacuum Cleaner Dealers

We are capable of delivering the products in exceptional packaging material, this circumvents the loss during transit and thus, the product is delivered safely. We are working with an aim of making available flawless lot of products and for this; we check the product quality on several grounds.Features : Wet & Dry application Micro filtration system : Cyclone Filter Reusable cloth filter Advanced micro cartridge filter Mesh filter Manual filter shaker to clean reusable cloth filter Heavy duty – continuous operation Wide range of nozzles Easy to operate and Handle High Vacuum Strong wheels for movement over rough industrial floors Maintenance free blower Single phase, phase sequence & over load protection Additional waste storage tank (Optional) Brake wheels (Optional) Vacuum gauge (Optional) Multi suction point where applicable (Optional) Stainless steel collection tank (Optional)

• Weight: 118kg.
• Cable length: 10m.
• Size: 1.17m x 0.75 m x 1.03m

VoltageFrequency: 380VAC50Hz. Current: 6A.Power: 2.2KW. Soft tube diameter: 40mm. Soft tube length: 5m. Colection tank capacity : 65L. Water suction width: 490mm. Suction: 8inhg.

Santoni offers a range of heavy-duty industrial vacuum cleaners that can be run virtually non-stop round the clock. Heavy Duty Vacuum Cleaner is available in a range of 4 models, i.e. HVC-3, HVC-5, HVC-7.5 & HVC-10, and with exceptional features such as very large filter area and external filter shaking device, etc. These High Power Vacuum Cleaner is meant for industry where cleaning is done under tough conditions for long working hours. Adaptability with ULTRA Filters. Santoni is counted among the most dependable Three Phase Vacuum Cleaner Suppliers in India. For the industry that requires heavy-duty continuous rating industrial vacuum cleaners SANTONI offers a full range of machines that are not only rugged and virtually maintenance-free, but also perform like untiring work horses. In the industry where the conditions are either hazardous or require non-stop or long hours of cleaning ordinary vacuum cleaners based on high RPM universal motors cannot foot the bill. Take for example LPG cylinders manufacturers, who have to clean the interior of the LPG cylinders - each one of them - day in and day out, no ordinary solution would work. These LPG cylinder manufacturers have found the right answer - SANTONI’s HVC range of vacuum cleaners. There are many other examples but probably none may match your set of conditions. It is, therefore, imperative that you discuss your requirements with one of the application engineers of SANTONI and let him suggest to you a model that exactly meets your requirements. It is possible that you may be having either a very large floor area, or bulk handling of materials is the underlined performance factor, but, rest assured, SANTONI has a solution for you. Try it. BASED ON TWIN-LOBE BLOWERS SANTONI’s HVC’s are based on 3-Phase induction motor run ‘twin-lobe blowers’. These three phase induction motors are the same kinds which are used as prime movers in most of the industrial equipment and plants. They can be used continuously - virtually non-stop for ever and they require minimal maintenance. Moreover, there are no inherent sparks - as is the case with universal motors used in ordinary vacuum cleaners - eliminating any fire hazards (this is valid specifically for those industries where thinners, inflammable gases, petro-products, etc. are used). The twin-lobe blowers are positive-displacement blowers offering almost straight-line ‘air-flow-vs.-pressure’ graph, which, in simple words, means that they do not loose pressure when higher air-flow is extracted or they do not choke when higher pressure is used. This makes these blowers ideal for industrial applications requiring deeper penetration or cleaning of narrower spaces The HVCs have special built-in protection for the twin-lobe blowers and the modes not allow any dust above 100 microns to enter the blower in case the main filter of the unit gets damaged or operator forgets to fit it after cleaning. There is a safety-valve which ensures that the motor is never over-loaded if the system is choked for some reason - as the blower is a positive displacement system as explained earlier The HVCs have a cyclone-effect pre-filtration system - to ensure that the main filter of the unit encounters only 15% of the total dust picked-up by the unit. Due to this cyclone effect pre-filter the main filter remains unobstructed and the machine gives its best performance for longer periods. The main filter is made out of synthetic permanent filter media. This has a very long life and does not react with alkaline or acidic materials. The area of the filter is very large - again a factor that ensures high performance and reduces chances of choking. The twin-lobe blower is further supported by a silencer to reduce the noise-level of the unit - which is under 73 db. While HVC-3 is a single user-point machine and the HVC-7.5 is a double user-point machine, HVC-5 can be used both as a single point and double point machine. OPTIONAL WET/DRY INTERCEPTORS Special types of mobile/stationary interceptors are available which can be used with HVC series vacuum cleaners for wet cleaning, removing liquids, removing bulk quantities of solids or where certain materials have to be collected separately (because they are expensive or they are not to be mixed with other materials).

• Voltage: 400 V
• Power: 2900
• Weight: 87 Kg.
• Usage/Application: Industrial
• Phase: Three Phase
• Air Flow: 97 LPS
• Size/Dimension: 619x1200x1330mm
• Capacity: 45 Ltr.
• Power (W): Customised
• Minimum Order Quantity: 1 Number

• Warranty: 1 Year
• Brand Name: Manmachine
• Power: 3.0 kw
• Motor: Turbina 400V-50 Hz
• Number Of Motor: 1
• Container Capacity: 75
• Noise Level: low
• Filtering Surface: 17.000 cm
• Automation Grade: Automatic
• Frequency: 50 Hz
• Number Of Current Phases: 3
• Tank Capacity: 75
• Tank Body Type: Inox 304
• Airflow: 330(m3/h)
• I deal in: New Only
• Water Lift: 2800mm
• Trolley: No
• Finish: Coated
• MAterial: Steel
• Phase: 3
• Power Source: Electric
• Minimum Order Quantity: 1 Unit

With the help of our adroit professionals we have emerged as a leading supplier of Three Phase Vacuum Cleaner based in TELANGANA, HYDERABAD. We have gained much popularity for supplying the superior quality Three Phase Vacuum cleaner in the global market. We have the capability of supplying the retail as well as bulk orders within committed time frame. Safe and timely delivery of the same is assured with our advance transit facilities. Moreover, this vacuum cleaners is economically priced to break all budget constraints

The BASIC WM 250 is the most classic and common industrial single-phase vacuum cleaner with 2 by-pass motors, 50 liters capacity, stainelss steel containers and conventional filtering system with pocket filter. This model is designed for non-specific multi-purpose application in the industrial field This series of BASIC industrial vacuum cleaners refers to the more classic and simple filtration system normally used by most common industrial vacuum cleaners with filters made of polyester fabric non-woven fabric with pockets or star shaped filters offering standard filtration of 3μ particles that can be increased by using optional filters with PTFE membrane for 1 μ particles.

A63-A65-A103 are Three-phase industrial vacuum cleaners with motor at the top, suitable for industrial applications for continuous use, size is compact and easy to use make it add on feature. Equipped with suction unit 2.2 and 4 kw multi-tension, they are fitted with a star filter, manual filter shaker and removable container with a capacity of 65 and 100 lit. The model 2.2 kw is also available in ATEX version for zone 2-22.

Three Phase Dry Vacuum Cleaner, Single Phase Wet and Dry Vacuum Cleaner

Three Phase Atex Industrial Vacuum Cleaner, Cold Jet Washer