Tig Welding Equipment Dealers

The organization is indulged in offering secured payment procedure including both online and offline methods. To maintain more clarity of the transaction, we offer an invoice as well. In our warehouse, we store the entire lot under a safe environment and our unit is facilitated with all required amenities ensuring complete safety of the products from different kinds of damages. We supply TIG Welding Equipment which has a sturdy body and is largely used for various commercial purposes. 

• Input voltage: AC220±15%Volt
• Frequency: 50/60Hz
• Welding current range (TIG Mode): 5-200Amps DC

Tungsten Inert Gas Welding (TIG) or Gas Tungsten Arc Welding (GTAW) is an arc welding process where a non-consumable electrode is used for the welding.The weld area and electrode are protected from oxidation by the inert shielding gas which may be Argon or Helium. The filler metal is usually used in welding. The tig welding equipment is used for thin sheets of stainless steel and nonferrous material like Aluminium, magnThis welding process needs a trained welder as in this process of welding needs to use both hands very judicially. Here one hand is used to hold the torch to produce the arc and second hand used for the filler wire. We are argon welding machine manufacturers and produce a wide variety of tig welders in every segment. Our tig welding equipment manufacturers team is highly qualified and keep on researching about the constant improvement to make the tig welder more compact, handier, control the argon machine price, more efficient machine, to produce a better arc for the tig welder.We produce TIG welding machine for Indian customers with best argon welding machine price in india. We export our machine to Nigeria, Sri Lanka, Bangladesh, Saudi Arab etc. esium and copper alloys. This is not useful in welding of Zinc alloy.The constant electric power supply produces arc which passed through the gas to vapors of the metal.

• Yellow: Black

We are offering Ac Tig Argon Welding Equipment. vulcan alternating current to weld aluminum, magnesium and rutile electrodes. Continuous regulation of welding current. Low spatter and high performance. Built in function for high quality tig welding. Down slope time control from smooth and perfect finish of welding. Inclusive hf unit high frequency generator for arc striking without contact. Gas pre/post flaw to eliminate contamination of the weld. included accessory : hf unit, gas regulator & flow meter, tig torch and dc suppressor unit.

• Power Capacitance: 3.9KVA
• Rated Input Current: 17.8A

acdc tig metal plus welding equipments smooth arc and stable welding performance ideal for welding carbon steel, stainless steel, copper and non-ferrous metal with dc tig function and aluminum, aluminum alloy welding in ac function automatic over-voltage and over-current, protection quick connect torch and gas fittings. High strength case construction for industrial applications.

Semi Automatic MIG (Metal Inert Gas) welding is an Electric Arc Fusion process using bare or flux cord wire with a gas shield of argon or CO2 or mixture of gases to protect the weld pool for atmosperic contamination. The equiptment comprises of a D.C. constant potential or variable characteristic power source, a wire feed unit and torch. The electrode wire passses through the torch and on touching the work -piece an arc is established. The arc voltage is maintained constant automatically resulting in better quality welds with minimum welders skill. D.C. Power Sources : GR-200/GR-400/GR-600. The Power Sources are designed for use with a MIG Wire Feeder Unit, Thyristor controlled for spray transfer MIG Welding. given for supply to the Wire feeder Unit Attachment & to the CO2 heater. The welder has available delay drop out to adjust the desired burnback.  

TIG Welding Plant encased in well finished Portable Sheet metal drip Proof casting, incorporates following main components. High Frequency Unit : Consisting of well balanced LRC Circuit, spark Gap unit and an air core Transformer to prevent mains frequency from entering into the Oscillating Circuit A solenoid Valve, for starting the gas supply and stopling it after pre-determined time, remotely controlleable from the foot pedal switch. DC Suppressor or Wave Balancer (Alternative to D.C. Suppressor): Recommended forwelding of Aluminium, Magnesium and their alloys, when Welding with AC power the unit improves stability, eliminates 'Clipping' and balances the unbalanced AC Waves. H.F. Unit with Wave Balancer (Combined unit): An unique unit to economize, and minimize the investments. Specially developed for combined work of S.S. & Aluminium. Encased in one housing to save the requirement of space. Argon Arc Touch: Air or Water Cooled touches from 50 to 600 Amps. Capacities of sturdy, brass construction, specially designed to be light and balanced. Torch is supplied with water cooled cable, fuse unit and welding cable S> water Cooled shield or Ceramic shield. Suitable set of Collets to hold Tongsten Electrodes, of different sizes as per the applications, with collet spaner. The following are essential and supplied on specific request only : Tungsten Electrodes Ceramic Shield Flowmeter regulator Coolant pump (water recirculating device) Trolley for TIG Welding requirements Gas & water shut off valve-mechanically operated to econpmize flow of gas and water. POWER SOURCE : 'TIG' Welding Power Source should have drooping Volt-Amps. Characteristic, should preferably incorporate bypass condensor and contacters to control the mains supply. Can have AC or DC output depending upon the application. For AC TIG Welding, 01 copied or Forced Air cooled welding Transformers with dual open circuit voltages of 80 and 100 Volts, model-300 Amps or 450 Amps are recommended for welding of Aluminium, magnesium, their alloys particularly and other weldable materials. The heat concentration is equally divided between the work piece (Job) and the Electrode. The AC Arc helps, particularly to remove the refractory oxide, which forms on some light metals and alloys. For DC TIG Welding, DC Welding Rectifier sets type-200T, 300T, 400T. 500T and 600T are ideal for use on all weldable metals and S. S., heat resistant Steels, mild Steels, Chrome Nickel and Copper Nickel alloys, Copper, Lead, Titanium, Molybdenum, Ziroconium and Silver. In case of DC Welding, major portion of heat is concentrated at positive end of the Arc, therefore the Electrode should be connected to the negative terminals. AC/DC combined welding Transformer rectifiers are economically very ideal for the job of S. S. & whenever required of Aluminium. The sets are combined model to get the AC or DC output as per the applications. Models-200M, 300M, 400M, 500M, and 600M, are recommended for the purpose, which reduces the necessity of 2 different power source for S.S. & Aluminium TIG Weldings. ADDITIONAL EQUIPMENT FOR D. C. TIG WELDING: Special attachment, provided with basic D.C. power Source to achieve minimum output current up to 2 Amps suitable for thinner metals which can be supplied on specific request.

tig welding equipment, LUG CONNECTOR FOR WELDING MACHINE

tig welding equipment, arc welding equipment, mig welding equipment

tig welding equipments, Welding Positioners, Welding Rotators

tig welding equipments, Welding Equipments, mig welding equipments, Cables

welding equipment including tig welding equipment

tig welding equipment, Welding Equipment, welding parts, Welding Accessories

tig welding equipments, Earth Clamp, Hand Tool, Drill Machine, safety glass

tig welding equipment, energy conservation equipment, energy saving equipment

tig welding equipments, Inverter, manual metal arc welder

tig welding power source equipments, arc welding equipments

tig welding equipment, draw bench, Jewellery Making Machine

tig welding equipment, Industrial Valves, mig welding equipment

tig welding equipment, Welding Machinery, welding safety accessories