Tilt Sensors Dealers

We are offering digital tilt sensor (arduino compatible). introduction this is a digital tilt switch. It can be used as a simple tilt sensor. simple plug to our io/sensor expansion board, you can make amazing interactive projects. specification interface type: digital pin definitions: (1) output (2) power supply (3) ground

Tilting of surfaces can cause serious obstructions in processes and can also result in hazards. The wireless tilt sensor detects tilts greater than or equal to 45° and reports it in real-time.

• Features: The comparator output signal is clean, good waveform, driving ability, more than 15mA.Signal detection sensitivity can be adjusted using potentiometer.
• The output format: digital switching outputs (0 and 1).
• PCB board size: 3.2 cm x 1.4 cm
• Supports: 5 V / 3.3 V voltage input.

ARN-TS2D is a MEMS based dual axis digital tilt sensor (inclinometer) that boasts high accuracy at low price tag. It is most appropriate for mechanical industry, heavy vehicle and motion sensing applications.

• Material: Paper
• Type: Adhesive Sticker
• Usage: Food
• Specialities: Freshness
• Country of Origin: United Kingdom
• Custom Order: Accept

Dual axis inclinometer Measurement range +/-5° +/-15° and +/-30° High accuracy Digital and analogue output signal CANopen CE approved Description The D-series of conductive inclinometers offers modern SMD- technology in an environmentally protected and robust aluminium housing. The inclinometer achieves high accuracy over a wide temperature range. The fast microcontroller works with a linearization and temperature compensation routines.This full calibrated inclinometer is available with digital output RS 232 and analogue voltage output 0.5 up to 4.5 V or current output 4…20mA or PWM output or switch output signals. Futhermore is inclinometer is available with an CANopen interface. Features High accuracy Robust metal housing, IP Class 67/68 High resolution EMC protected CE approved Rugged M12 male connector Programmable digital filtering to minimized influences from shock and vibration Programmable zero point, baud rate, output rate Applications Building control Road construction machines Wind power Weighing systems Mobile and stationary cranes Hydraulic leveling Platform leveling Drilling machines

• Applied Sensor: Vibrating Wire
• Range: ±5° ±10°
• Resolution: 5arc second /10arc second
• Accuracy: ±0.1%FS
• Non Linearity: ±0.5%FS

Tilt Sensors are used to monitor changes in the tilt of a structure. Such changes may be caused by excavation, tunneling, dewatering, or loading of the structure. Typical applications for tilt sensors include: Monitoring stabilization measures, such as pressure grouting and underpinning. Monitoring structures for the effects of tunneling and excavating. Monitoring the deflection and deformation of retaining walls. Monitoring convergence and other movements in tunnels. Providing early warning of threatening deformations, allowing time for corrective action to be taken.

Tilt sensors allow you to detect orientation or inclination. They are small, inexpensive, low-power and easy-to-use. If used properly, they will not wear out. Their simplicitiy makes them popular for toys, gadgets and appliances.

MEMS-based absolute sensing technology. Measuring ranges of +-10°, +-20°, +-30° and +-60° (Single Axis only) . IP 68 sealed. 0.5 to 4.5V DC output.

Tilt switch level sensor is a very rugged and proven instrument for monitoring top level of bulk material stored in an open space or in a bunker / silo. It has a special level detecting probe which is beyond a preset angle due to piling of material. The sensor probe is available in a robust MS tube for solids and a light duty plastic tube for food grains and fertilizer. Special models for use in hazardous environment are available.

KY-020 Tilt Switch Sensor Module Electric Circuit for Arduino Tilt switch module and a digital interface, built-in 13 LED build a simple circuit to produce tilt warning lamp 13comes with digital interfaces of the LED, the tilt switch sensor interface to access digital 3,when the tilt open Off sensor senses a key signal, LED lights, otherwise off.  

Digital Tilt Sensor, Digital Inclinometer, digital magnetic compass

Tilt Sensor, Brass Frequency Sensor Parts, Beam Sensor, Sick Sensor

We are one of the leading Manufacturers, Exporters & Suppliers of Tilt Sensor. The Tilt Sensor operates on 5V dc supply. It gives 3 output voltages corresponding to 3 axis movement of sensor. The Tilt Sensor is widely used for monitoring the boom angle of cranes and material handlers, indicating pitch and roll of vehicles sail boats, and aircraft, etc. We supply excellently performing and durable Tilt Sensor at competitive prices. Working Principle : The ADXL335 is a complete 3-axis acceleration measurement system. The ADXL335 has a measurement range of ±3 g minimum. It contains a polysilicon surface-micro machined sensor and signal conditioning circuitry to implement open-loop acceleration measurement architecture. The output signals are analog voltages that are proportional to acceleration. The accelerometer can measure the static acceleration of gravity in tilt-sensing applications as well as dynamic acceleration resulting from motion, shock, or vibration. The sensor is a polysilicon surface-micro machined structure built on top of a silicon wafer. Polysilicon springs suspend the structure over the surface of the wafer and provide a resistance against acceleration forces. Deflection of the structure is measured using a differential capacitor that consists of independent fixed plates and plates attached to the moving mass. The fixed plates are driven by 180o out-of-phase square waves. Acceleration deflects the moving mass and unbalances the differential capacitor resulting in a sensor output whose amplitude is proportional to acceleration. Phase-sensitive demodulation techniques are then used to determine the magnitude and direction of the acceleration. Applications : Indicating pitch and roll of vehicles sail boats, and aircraft Monitoring the boom angle of cranes and material handlers Measuring the "look angle" of a satellite antenna towards a satellite In the field of robotics or fall detection

MERCURY TILT SWITCH SENSORS, ENVIRO BATTERY, Educational Solar Kit

Tilt Sensor - Low End, Barcode Scanner, signal conditioner, Thermocouple

Digital Tilt Sensor, DPDT Switch, Sound Sensor Module, LCD Shield

Tilt Sensor, Vibration Sensor

Digital Tilt Sensor, Panic Switches, IR LED Dome Camera

Tilt Switch Level Sensor, Cross Roller Table, White Metal Bearings

Tilt Sensor, eeprom, Nfc Readers, voltage sensor, touch sensor

Tilt Sensor, tilt switch, Electronic Buzzer

Digital Tilt Sensor, Panic Button Light Switch, vibration detector

tilt angle sensor, weight indicator, Controller, BMI Machine

Tilt Sensor, XBee 1mW Wire Antenna - Series 1

tilt angle sensor, tracker, rotation sensor, mobile weather stations